Corrosion behavior of PEO-treated AZ31 Mg alloy in chloride solution

Corrosion behavior and resistance of plasma electrolyte oxidation (PEO)-treated AZ31 Mg alloy were investigated by immersion and potentiodynamic polarization tests in 0.5 M NaCl solution in view of the PEO film thickness and sealing treatment of the PEO films in boiling water. The PEO films were formed using pulse current for various durations in 1 M NaOH?+?0.5 M NaF solution. Filiform corrosion was observed during the immersion test while pitting corrosion occurred during the potentiodynamic polarization test, irrespective of sealing treatment of the PEO films. Corrosion resistance of AZ31 Mg alloy was improved remarkably by the formation of thicker PEO films and their sealing treatments.     

Spectroscopic Monitoring of the Acidity of Water Films on Ru(0001): Orientation‐Specific Acidity of Adsorbed Water

We examined the acid–base properties of water films adsorbed onto a Ru(0001) substrate by using surface spectroscopic methods in vacuum environments. Ammonia adsorption experiments combined with low‐energy sputtering (LES), reactive ion scattering (RIS), reflection–absorption infrared spectroscopy (RAIRS) and temperature‐programmed desorption (TPD) measurements showed that the adsorbed water is acidic enough to transfer protons to ammonia. Only the water molecules in an intact water monolayer and water clusters larger than the hexamer exhibit such acidity, whereas small clusters, a thick ice film or a partially dissociated water monolayer that contains OH, H₂O and H species are not acidic. The observations indicate the orientation‐specific acidity of adsorbed water. The acidity stems from water molecules with H‐down adsorption geometry present in the monolayer. However, the dissociation of water into H and OH on the surface does not promote but rather suppresses the proton transfer to ammonia.     

Crowning Proteins: Modulating the Protein Surface Properties using Crown Ethers

Crown ethers are small, cyclic polyethers that have found wide‐spread use in phase‐transfer catalysis and, to a certain degree, in protein chemistry. Crown ethers readily bind metallic and organic cations, including positively charged amino acid side chains. We elucidated the crystal structures of several protein‐crown ether co‐crystals grown in the presence of 18‐crown‐6. We then employed biophysical methods and molecular dynamics simulations to compare these complexes with the corresponding apoproteins and with similar complexes with ring‐shaped low‐molecular‐weight polyethylene glycols. Our studies show that crown ethers can modify protein surface behavior dramatically by stabilizing either intra‐ or intermolecular interactions. Consequently, we propose that crown ethers can be used to modulate a wide variety of protein surface behaviors, such as oligomerization, domain–domain interactions, stabilization in organic solvents, and crystallization.     

Ternary Sn-Ti-O Electrocatalyst Boosts the Stability and Energy Efficiency of CO2 Reduction

Simultaneously improving energy efficiency (EE) and material stability in electrochemical CO₂ conversion remains an unsolved challenge. Among a series of ternary Sn-Ti-O electrocatalysts, 3D ordered mesoporous (3DOM) Sn_0.3Ti_0.7O₂ achieves a trade-off between active-site exposure and structural stability, demonstrating up to 71.5 % half-cell EE over 200 hours, and a 94.5 % Faradaic efficiency for CO at an overpotential as low as 430 mV. DFT and X-ray absorption fine structure analyses reveal an electron density reconfiguration in the Sn-Ti-O system. A downshift of the orbital band center of Sn and a charge depletion of Ti collectively facilitate the dissociative adsorption of the desired intermediate COOH* for CO formation. It is also beneficial in maintaining a local alkaline environment to suppress H₂ and formate formation, and in stabilizing oxygen atoms to prolong durability. These findings provide a new strategy in materials design for efficient CO₂ conversion and beyond.     

Hierarchical Self‐Assembly of Poly‐Pseudorotaxanes into Artificial Microtubules

Hierarchical self‐assembly of building blocks over multiple length scales is ubiquitous in living organisms. Microtubules are one of the principal cellular components formed by hierarchical self‐assembly of nanometer‐sized tubulin heterodimers into protofilaments, which then associate to form micron‐length‐scale, multi‐stranded tubes. This peculiar biological process is now mimicked with a fully synthetic molecule, which forms a 1:1 host‐guest complex with cucurbit[7]uril as a globular building block, and then polymerizes into linear poly‐pseudorotaxanes that associate laterally with each other in a self‐shape‐complementary manner to form a tubular structure with a length over tens of micrometers. Molecular dynamic simulations suggest that the tubular assembly consists of eight poly‐pseudorotaxanes that wind together to form a 4.5 nm wide multi‐stranded tubule.     

Simultaneous separation and determination of 20 potential adulterant antigout and antiosteoporosis pharmaceutical compounds in herbal food products using LC with electrospray ionization MS/MS and LC with quadrupole‐time‐of‐flight MS

An analytical method for the simultaneous and reliable determination of 20 antigout and antiosteoporosis pharmaceutical compounds in adulterated health food products was developed using liquid chromatography with electrospray ionization tandem mass spectrometry and liquid chromatography with quadrupole‐time‐of‐flight mass spectrometry. The method was validated through the determination of specificity, linearity, limit of detection, and limit of quantification, method detection limit, method quantitation limit, precision, accuracy, recovery, and stability. The matrix effect was also determined. The validation results of the developed method are as follows: for solid and liquid blank samples, limits of detection ranged from 0.05 to 5.00 ng/mL and limits of quantification ranged from 0.15 to 15.00 ng/mL. Linearity was acceptable, and the correlation coefficients (R²) were ≥0.99 for all target compounds. Both intra and interday precision were less than 9.16% RSD, and accuracies ranged from 95.31 to 116.68%. Mean recoveries for different types of dietary supplements classified as powders, liquids, tablets, and capsules were found to be 80.81 to 117.62% with less than 15.00% relative standard deviation. The stability of the standard mixture solution was less than 11.72% relative standard deviation after 48 h. By the proposed method, the presence of dexamethasone was determined in seized herbal food products at concentrations that ranged from 126 to 215 µg/g.     

Preparation and ionic conductivities of the plasticized polymer electrolytes based on poly(methyl methacrylate-co-alkali metal methacrylate)

Ionic conductivities of the polymer electrolytes prepared from the ionomer (poly(methyl methacrylate-co-alkali metal methacrylate)), lithium perchlorate, and ethylene carbonate as a plasticizer, were studied as a function of the ion content and the alkali-metal cation of the ionomer. It was possible to obtain tough films with room-temperature ionic conductivities of ∼ 10^-3 S/cm. The maximum ion conductivities of the polymer electrolytes were obtained at the ion content of 5 mol % for both Li and Na ionomer. The effects of the ion content of the ionomer on the ionic conductivities of the polymer electrolytes were mainly interpreted in terms of the characteristics of the ion aggregate formed in the polymer electrolytes. The thermal dependence of the ionic conductivity was shown to be a non-VTF pattern in some of the polymer electrolytes investigated, which is expected to be due to the presence of the ion aggregate. © John Wiley & Sons, Inc.     

Efficient deep blue organic light emitting diodes based on [2,7,7,13,13-pentamethyl-9-(10-phenylanthracen-9-yl)-7,13-dihydrobenzo[5,6]-s-indaceno[1,2-g]quinoline] derivatives

Abstract

In this study, as the ongoing effort to develop efficient blue OLEDs, two deep blue emitters based on indenoquinoline-substituted anthracene derivatives have been synthesized and characterized. Multilayer organic light emitting diodes were fabricated with the following sequence: indium-tin-oxide (ITO)/4,4’,4’’-tris[2-naphthyl(phenyl)amino (2-TNATA)/4,4’-bis(N-(1-naphthyl)-N-phenylamino) biphenyl (NPB)/Blue emitting materials/Bathophenanthroline (Bphen)/lithium quinolate (Liq)/Al. All the devices showed efficient blue emissions. Particularly, a device using ‘2,7,7,13,13-pentamethyl-9-(10-phenylanthracen-9-yl)?7,13-dihydrobenzo[5,6]-s-indaceno[1,2-g] quinoline’ as an emitter showed a maximum external quantum efficiency (EQE) of 4.92% with the Commission Internationale De L’Énclairage (CIE) coordinates of (0.15, 0.10) at 8.0?V.     

Fabrication of Pre-tilted Vertical Alignment Layers for High-Speed Liquid Crystal Display Using Bi-functional Photoreactive Monomers

Abstract

To enable recent 3D and moving picture applications, liquid crystal displays (LCD) must exhibit fast response and wide viewing angle characteristics. Pre-tilted vertical alignment layers for high-speed LCD were fabricated using bi-functional photoreactive monomers. The monomers can be confined to the polyimide layer and photo-polymerized by UV exposure under voltage. Response characteristics of photo-controlled alignment films according to the structure were investigated. Vertical alignment properties were evaluated using a polarizing optical microscope, and electro-optical characteristics were compared through the voltage-transmittance curve and response time measurement. Faster response speed could be obtained by using photoreactive monomers having a long alkyl chain.     

Synthesis and size control of monodisperse copper nanoparticles by polyol method

We describe herein the synthesis of metallic copper nanoparticles in the presence of poly(vinylpyrrolidone), employed as a protecting agent, via a polyol method in ambient atmosphere. The obtained copper particles were confirmed by XRD to be crystalline copper with a face-centered cubic (fcc) structure. We observed monodisperse spherical copper nanoparticles with a diameter range 45+/-8 nm. The particle size and its distribution are controlled by varying the synthesis parameters such as the reducing agent concentration, reaction temperature, and precursor injection rate. The precursor injection rate plays an important role in controlling the size of the copper nanoparticles. On the basis of XPS and HRTEM results, we demonstrate that the surface of the copper is surrounded by amorphous CuO and that poly(vinylpyrrolidone) is chemisorbed on the copper surface.