Thermal behavior of polyacrylonitrile polymers synthesized under different conditions and comonomer compositions

Polyacrylonitrile (PAN) polymers are used as precursors for carbon fiber production. This process requires an oxidative stabilization step, which can be studied by differential scanning calorimetry (DSC). In this sense, thermal behavior of PAN based terpolymers by different polymerization processes, compositions and itaconic acid concentrations in the reaction media were investigated. The obtained results showed that the addition of itaconic acid and methyl acrylate as comonomers resulted a lower heat flow during the process comparing to the PAN homopolymer. It suggested that these comonomers aid the oxidative stabilization stage for all studied process. The redox system polymerization at 40°C resulted in a lower heat flow. Itaconic acid decreases slightly initial and peak temperatures of the terpolymer and heat flow until concentration of 3y. The cyclization temperature decreases when MAis incorporated into the terpolymer compared to the MMA terpolymer and increases when MAA is the acidic monomer. Among terpolymers the AN/MA/AA polymer showed the best thermal behavior for carbon fiber producing.     

Assessment of corrosion resistance of surface-coated galvanized steel by analysis of the AC impedance spectra measured on the salt-spray-tested specimen

In the present work, corrosion resistance of surface-coated galvanized steel was quantitatively determined by an analysis of the alternating current (AC) impedance spectra measured on the salt-spray-tested specimen. To evaluate the corrosion resistance of the surface-coated galvanized steel, AC impedance spectroscopy was performed on the salt-spray-tested specimen previously exposed to salt-sprayed corrosive environment. From the analysis of the impedance spectra, the area fraction transient of white rust θ ₂(t) was theoretically derived from the equivalent circuit equation by using two fitting parameters. The values of the two fitting parameters were determined by fitting the empirical transient equations to the area fraction of the resin coating layer and to the total resistance obtained from the impedance spectra measured, respectively. From the analyses of θ ₂(t) for four kinds of surface-coated galvanized steels with various resin coating layers, it is indicated that as the values of the two fitting parameters decrease in the order of CP, GI, OD and OM (commercial trade names) specimens, the corrosion resistance increases in that order as well. Furthermore, from the quantitative comparison of the two fitting parameters with the polarization resistance of the upper resin coating layer R _p determined from the potentiodynamic polarization curve, it is suggested that the two fitting parameters decrease in value as well with increasing R _p.     

Second Dissociation Constant of H<Subscript>2</Subscript>Te and the Absorption Spectra of HTe<Superscript>–</Superscript>, Te<Superscript>2–</Superscript> and Te<Subscript>2</Subscript><Superscript>2–</Superscript> in Aqueous Solution

We have measured the second acid dissociation constant, K _2a , at several ionic strengths for hydrogen telluride (H₂Te) using the Charge Transfer to Solvent (CTTS) uv spectra of its anions HTe⁻ and Te²⁻. Since it is produced in our solutions, we have also determined the spectra of Te₂ ²⁻ both in the uv and in the visible regions. At 25 ^∘C, K _2a = (1.28 ± 0.02) × 10⁻¹² by extrapolation to zero ionic strength. Its value at an ionic strength equal to 0.5 mol.dm^-3 was estimated to be (8.7 ± 0.2) × 10⁻¹². The solution thermodynamics of these species are also discussed and comparisons are made to related acids.     

Synthesis, solid-state structure, and bonding analysis of the beryllocenes [Be(C5Me4H)2], [Be(C5Me5)2], and [Be(C5Me5)(C5Me4H)

The beryllocenes [Be(C(5)Me(4)H)(2)] (1), [Be(C(5)Me(5))(2)] (2), and [Be(C(5)Me(5))(C(5)Me(4)H)] (3) have been prepared from BeCl(2) and the appropriate KCp' reagent in toluene/diethyl ether solvent mixtures. The synthesis of 1 is facile (20 degrees C, overnight), but generation of decamethylberyllocene 2 demands high temperatures (ca. 115 degrees C) and extended reaction times (3-4 days). The mixed-ring beryllocene 3 is obtained when the known [(eta(5)-C(5)Me(5))BeCl] is allowed to react with K[C(5)Me(4)H], once more under somewhat forcing conditions (115 degrees C, 36 h). The structures of the three metallocenes have been determined by low-temperature X-ray studies. Both 1 and 3 present eta5/eta1 geometries of the slip-sandwich type, whereas 2 exhibits an almost regular, ferrocene-like, sandwich structure. In the mixed-ring compound 3, C(5)Me(5) is centrally bound to beryllium and the eta(1)-C(5)Me(4)H ring bonds to the metal through the unique CH carbon atom. This is also the binding mode of the eta(1)-ring of 1. To analyze the nature of the bonding in these molecules, theoretical calculations at different levels of theory have been performed on compounds 2 and 3, and a comparison with the bonding in [Be(C(5)H(5))(2)] has been made. As for the latter molecule, energy differences between the eta5/eta5 and the eta5/eta1 structures of 2 are very small, being of the order of a few kcal mol(-1). Constrained space orbital variations (CSOV) calculations show that the covalent character in the bonding is larger for [Be(C(5)Me(5))(2)] than for [Be(C(5)H(5))(2)] due to larger charge delocalization and to increased polarizability of the C(5)Me(5) fragment.     

Standard molar enthalpy of formation of CH<Subscript>3</Subscript>(CH<Subscript>3</Subscript>SCH<Subscript>2</Subscript>)SO,methyl methylthiomethyl sulfoxide

Summary The standard molar enthalpy of formation of methyl methylthiomethyl sulfoxide, CH₃(CH₃SCH₂)SO, at T=298.15 K in the liquid state was determined to be -199.4±1.5 kJ mol^-1 by means of oxygen rotating-bomb combustion calorimetry.     

The reactant state for substrate-activated turnover of acetylthiocholine by butyrylcholinesterase is a tetrahedral intermediate

Secondary beta-deuterium kinetic isotope effects have been measured as a function of substrate concentration for recombinant human butyrylcholinesterase-catalyzed hydrolysis of acetyl-L3-thiocholine (L = 1H or 2H). The isotope effect on V/K is inverse, D3V/K = 0.93 +/- 0.03, which is consistent with conversion of the sp2 hybridized carbonyl carbon of the scissile ester bond of the E + A reactant state to a quasi-tetrahedral structure in the acylation transition state. In contrast, the isotope effect on Vmax under conditions of substrate activation is markedly normal, D3(betaVmax) = 1.29 +/- 0.06, an observation that is consistent with accumulation of a tetrahedral intermediate as the reactant state for catalytic turnover. Generally, tetrahedral intermediates for nonenzymatic ester hydrolyses are high-energy steady-state intermediates. Apparently, butyrylcholinesterase displays an unusual ability to stabilize such intermediates. Hence, the catalytic power of cholinesterases can largely be understood in terms of their ability to stabilize tetrahedral intermediates in the multistep reaction mechanism.     

Thermokinetics on the reaction of formation of Dy[(C<Subscript>5</Subscript>H<Subscript>8</Subscript>NS<Subscript>2</Subscript>)<Subscript>3</Subscript>(C<Subscript>12</Subscript>H<Subscript>8</Subscript>N<Subscript>2</Subscript>)]

The enthalpy change of formation of the reaction of hydrous dysprosium chloride with ammonium pyrrolidinedithiocarbamate (APDC) and 1,10-phenanthroline (o-phen?H₂O) in absolute ethanol at 298.15 K has been determined as (-16.12 ± 0.05) kJ?mol^-1 by a microcalormeter. Thermodynamic parameters (the activation enthalpy, the activation entropy and the activation free energy), rate constant and kinetics parameters (the apparent activation energy, the pre-exponential constant and the reaction order) of the reaction have also been calculated. The enthalpy change of the solid-phase reaction at 298.15 K has been obtained as (53.59 ± 0.29) kJ?mol^t-1 by a thermochemistry cycle. The values of the enthalpy change of formation both in liquid-phase and solid-phase reaction indicated that the complex could only be synthesized in liquid-phase reaction.     

Period-doubling and chaotic oscillations in the ferroin-catalyzed Belousov-Zhabotinsky reaction in a CSTR

The ferroin-catalyzed Belousov-Zhabotinsky(BZ) reaction,the oxidation of malonic acid by acidic bromate,is the most commonly investigated chemical system for understanding spatial pattern forma-tion. Various oscillatory behaviors were found from such as mixed-mode and simple period-doubling oscillations and chaos on both Pt electrode and Br-ISE at high flow rates to mixed-mode oscillations on Br-ISE only at low flow rates. The complex dynamic behaviors were qualitatively reproduced with a two-cycle coupling model proposed initially by Gy?rgyi and Field. This investigation offered a proper medium for studying pattern formation under complex temporal dynamics. In addition,it also shows that complex oscillations and chaos in the BZ reaction can be extended to other bromate-driven nonlinear reaction systems with different metal catalysts.     

Eu<Superscript>3+</Superscript>-fluorescence properties in nano-crystallized SnO<Subscript>2</Subscript>-SiO<Subscript>2</Subscript> glass-ceramics

Fluorescence and spectral hole burning properties of Eu³⁺ ions were studied in nanocrystals-precipitated SnO₂-SiO₂ glasses. The glasses were prepared to contain various amount of Eu₂O₃ using the sol-gel method, in which SnO₂ nanocrystals were precipitated by heating in air. In the glasses containing Eu₂O₃ less than 1%, the Eu³⁺ ions were preferentially doped in the SnO₂ nanocrystals and their fluorescence intensities were enhanced by the energy transfer due to the recombination of electrons and holes excited in SnO₂ crystals. The SnO₂ nanocrystals-precipitated glasses exhibited the persistent spectral holes with the depth of ∼25% of the total fluorescence intensities of the Eu³⁺ ions. With the increasing Eu₂O₃ concentration, the amount of SnO₂ nanocrystals decreased and the Sn⁴⁺ ions formed the random glass structure together with the silica network. This structure change induced the fluorescence intensities and the hole depth to decrease.     

Mesoporous amorphous MnO<Subscript>2</Subscript> as electrode material for supercapacitor

A kind of novel mesoporous, electrochemical active material, amorphous MnO₂ has been synthesized by an improved reduction reaction and using supramolecular as template. The synthesized sample was characterized physically by thermogravimetric analysis, X-ray diffraction, transmission electron microscope (TEM), and Brunauer–Emmett–Teller (BET) surface area measurement, respectively. Electrochemical characterization was performed using cyclic voltammetry and chronopotentiometry in 2 mol/l KOH aqueous solution electrolyte. The results of BET and TEM analysis indicated that supramolecular template plays an important role in the process of big specific surface area mesoporous material forming. After sintering at 200 °C, the sample still remained an amorphous structure, and its specific capacitance reached 298.7 F/g and presented a very stable capacitance after 500 cycles. In addition, the electrochemical process, such as ion transfer and electrical condition, was also investigated with electrochemical impedance spectroscopy.