Numerical Study of Mixed Convective Peristaltic Flow through Vertical Tube with Heat Generation for Moderate Reynolds and Wave Numbers

The current study focuses on the numerical investigation of the mixed convective peristaltic mechanism through a vertical tube for non-zero Reynolds and wave number. In the set of constitutional equations, energy equation contains the term representing heat generation parameter. The problem is formulated by dropping the assumption of lubrication theory that turns the model mathematically into a system of the nonlinear partial differential equations. The results of the long wavelength in a creeping flow are deduced from the present analysis. Thus, the current study explores the neglected features of peristaltic heat flow in the mixed convective model by considering moderate values of Reynolds and wave numbers. The finite element based on Galerkin's weighted residual scheme is applied to solve the governing equations. The computed solution is presented in the form of contours of streamlines and isothermal lines, velocity and temperature profiles for variation of different involved parameters. The investigation shows that the strength of circulation for stream function increases by increasing the wave number and Reynolds number. Symmetric isotherms are reported for small values of time-mean flow. Linear behavior of pressure is noticed by vanishing inertial forces while the increase in pressure is observed by amplifying the Reynolds number.     

Fermions tunneling from charged accelerating and rotating black holes with NUT parameter

We consider the production of the Standard Model Higgs boson through the gluon fusion mechanism in hadron collisions. We present the next-to-next-to-leading order (NNLO) QCD result of the hard-collinear coefficient function for the all-order resummation of logarithmically enhanced contributions at small transverse momentum. The coefficient function controls NNLO contributions in resummed calculations at full next-to-next-to-leading logarithmic accuracy. The same coefficient function is used in applications of the subtraction method to perform fully exclusive perturbative calculations up to NNLO.     

Synthesis,characterization and coordination chemistry of substituted β-amino dicarbonyls

An efficient and facile method for the synthesis of novel structurally diverse β-amino dicarbonyl compounds is described by exploring the aza-Michael addition reaction in an aqueous medium as a key step. Thereby, 2-(aryl-disubstituted-amino-1-yl-methyl)-malonic acid diethyl esters were achieved in a good to excellent yields. These products were easily isolated with enough purity just by using simple recrystallization. The crystals of the compounds (17) and (24) have been obtained and studied by X-ray crystallographic analyses.     

A facile synthesis of melatonergic antidepressant agomelatine

Agomelatine was synthesized from 8-aminonaphthalen-2-ol by diazotization-iodination, formylation, C–C bond formation by nitroaldol and Pd/C hydrogenation of β-nitrovinylnaphthalene followed by N-acetylation. The route reported employs readily and commercially viable starting materials and reagents, and can potentially be utilized for process synthesis of agomelatine.     

Design and development of an optical beam splitter assembly and high precision colinearity measurements of laser beams

Laser beams with extremely high colinearity are often required where precision position monitoring is important. In order to achieve the said objective, a special type of Laser Beam Splitter Assembly (BSA) has been designed and fabricated in a very small volume due to space constraints. The main features and details of such a system are described here. This type of beam splitter assembly coupled with a diode laser through fibers can be remotely used for alignment or position monitoring of different medium to large size structures with a reconstruction accuracy of 10 μm. In this way, BSA generates two counter propagating laser beams from a single diode laser coupled to an optical fiber. In the present work, the colinearity between two beams within 1 mrad with the variation of 50 μrad has been achieved. The laser's power in the two arms may be controlled precisely, which is an important feature of this BSA. The BSA has been tested to work over a temperature range between ?20 °C to +40 °C. It has also been exposed to 1.0 MeV neutrons at a flux of ～5.0×10¹⁰ n/cm²/s and found compatible.     

Stressed Kinetics of Nanoemulsion Formulation Encapsulated Ropinirole with a Validated Ultra High Performance Liquid Chromatography–Synapt Mass Spectrometry (UPLC‐MS/MS ESI‐Q‐TOF)

A highly sensitive ultra high pressure liquid chromatography (UHPLC‐MSMS) method for estimation of ropinirole in rat brain homogenate and plasma has been validated. The method was successfully used for the degradation kinetics in different stress condition and regulated temperature. The chromatographic separation was achieved using isocratic mobile phase, consisting of acetonitrile–2mM ammoniumacetate (28:72 v/v; 0.25 mL min^?1). The mass spectrometer was operated in synapt mass spectrometry mode via positive electrospray ionization using the transitions m/z 260 → m/z 261 for ropinirole, and m/z 324.39 → m/z 262.161 as a parent ion of escitalopram (IS). The assay for ropinirole was linear over the range of 0.5–100 ng mL^?1 (r²; 0.999). The intra‐ and inter day precisions were less than 11.2% in terms of relative standard deviation (R.S.D.), and the accuracy was within ±6.4% in terms of relative error (RE). The mean extraction‐efficiency of QC samples (MQC, 8 ng/mL) was ≥80%. The lower limit of quantification (LLOQ) was 0.049 ng/mL where as lower limit of detection (LLOD) was 0.016 ng/mL. All the peaks of degradation were well resolved. The degradation kinetics of ropinirole, showed highest stability (t_1/2 256.66/h; t_0.9, 39.11/h) in acidic medium, lower stability in alkaline environment (t_1/2, 103.43/h; t_0.9, 15.76/h) and highly susceptible in oxidative environment (t_1/2, 21.58/h; t_0.9, 3.28/h). The applicability of this assay was demonstrated and successfully applied for pharmacokinetic profiling of ropinirole in Wister rat brain homogenate after intranasal administration.     

A modified sequential extraction method for arsenic fractionation in sediments

A modified sequential extraction method was developed to characterize arsenic (As) associated with different solid constituents in surficial deposits (sediments), which are unconsolidated glacial deposits overlying bedrock. Current sequential extraction methods produce a significant amount of unresolved As in the residual fraction, but our proposed scheme can fractionate >90% of the As present in sediments. Sediment samples containing different As concentrations (3–35 μg g⁻¹) were used to assess the developed method. The pooled amount of As recovered from all the fractions using the developed method was similar (83–122%) to the total As extracted by acid digestion. The concentrations of As in different fractions using the developed scheme were comparable (89–106%) to the As fractions obtained by other existing methods. The developed method was also evaluated for the sequential extraction of other metals such as copper (Cu), cobalt (Co), chromium (Cr) and strontium (Sr) in the sediment samples. The pooled concentrations of these four individual metals from all the fractions were similar (96–104%) to their total concentrations extracted by acid digestion. During method development, we used extractants that did not contain chloride to eliminate formation of polyatomic ions of argon chloride (⁴⁰Ar³⁵Cl) that interfered with ⁷⁵As when analyzed using inductively coupled plasma mass spectrometer (ICP-MS). The results suggest that the developed method can reliably be employed for complete As and other metals’ fractionation in sediments using ICP-MS.     

Sodium Bromide Catalysed Regioselective Cleavage of Oxitanes with Chlorotrimethylsilane

Sodium bromide efficiently catalyses the regioselective cleavage of oxiranes with chlorotrimethylsilane to the corresponding O-silylated chlorohydrins in excellent yields.     

Cobalt(II) Complex Catalysed Epoxidation with Molecular Oxygen

Cobalt(II) complexes 1 or 2, catalyses the epoxidation of alkenes in the presence of molecular oxygen and 2-methylpropanal in high yields.