A modified sequential extraction method for arsenic fractionation in sediments

A modified sequential extraction method was developed to characterize arsenic (As) associated with different solid constituents in surficial deposits (sediments), which are unconsolidated glacial deposits overlying bedrock. Current sequential extraction methods produce a significant amount of unresolved As in the residual fraction, but our proposed scheme can fractionate >90% of the As present in sediments. Sediment samples containing different As concentrations (3–35 μg g⁻¹) were used to assess the developed method. The pooled amount of As recovered from all the fractions using the developed method was similar (83–122%) to the total As extracted by acid digestion. The concentrations of As in different fractions using the developed scheme were comparable (89–106%) to the As fractions obtained by other existing methods. The developed method was also evaluated for the sequential extraction of other metals such as copper (Cu), cobalt (Co), chromium (Cr) and strontium (Sr) in the sediment samples. The pooled concentrations of these four individual metals from all the fractions were similar (96–104%) to their total concentrations extracted by acid digestion. During method development, we used extractants that did not contain chloride to eliminate formation of polyatomic ions of argon chloride (⁴⁰Ar³⁵Cl) that interfered with ⁷⁵As when analyzed using inductively coupled plasma mass spectrometer (ICP-MS). The results suggest that the developed method can reliably be employed for complete As and other metals’ fractionation in sediments using ICP-MS.     

Recurrence Tracking Microscope Based on Two Magnetic Mirrors

We introduce a recurrence tracing microscope based on the reflection of cold atoms from two magnetic mirrors placed in parallel. A cantilever is attached perpendicularly to one of the two mirrors at the lower end that probes surface structures. The quantum dynamics in the system provides the matter waves to store information on the height and spacing between the nanostructures. We use the recurrence tracking microscope in static and dynamic modes to study arbitrary and periodic nanostructures.     

Study of the effect of laser treatment on the initial oxidation behaviour of Al‐coated NiCrAlY bond‐coat

In this study, the initial oxidation behaviour of laser‐treated Al/NiCrAlY bond‐coat is investigated. Two approaches, (i) Al film sputtering on the surface of bond‐coat and (ii) laser treatment, have been taken to enhance the oxidation resistance of NiCrAlY bond‐coat. Experimental results showed that after laser treatment, the Al/NiCrAlY bond‐coat exhibited a columnar dendritic microstructure without cracks and voids. A dense and continuous α‐Al₂O₃/Cr₂O₃ multilayer was found to form on the bond‐coat surface. Results on the cyclic oxidation at 1200 °C (for time ≤ 204 h) revealed that the laser‐treated Al/NiCrAlY bond‐coat exhibited better oxidation resistance compared to as‐sprayed NiCrAlY, Al/NiCrAlY and laser‐remelted NiCrAlY bond‐coat. The formation of θ‐Al₂O₃, NiO, Cr₂O₃ and NiCr₂O₄ spinel oxides was observed to be suppressed due to the preformed α‐Al₂O₃ scale during initial oxidation on the surface of laser pre‐oxidized Al/NiCrAlY bond‐coat. Copyright © 2013 John Wiley & Sons, Ltd.     

Role of a Repeated Hexapeptide Motif GIHFAP Near C-terminus in Assembly, Stability, and Activity of “HCH Dehydrochlorinase LinA”

Enzyme “hexachlorocyclohexane (HCH) dehydrochlorinase LinA” mediates first step of aerobic microbial degradation of a chlorinated insecticide γ-HCH. The archetypal LinA-type1 consists of 156 amino acids that include a directly repeated hexapeptide motif GIHFAP at positions 141–146 and 148–153. Analysis of a series of LinA mutants, containing none, one, two, or three units of this repeated motif revealed that two units, as present in wild-type LinA, are required for its optimal activity and stability. Moreover, the presence of a bend in its secondary structure due to a proline residue that precedes the distal repeated unit contributes to enhanced LinA activity.     

Phenylpropanoids from Tanacetum baltistanicum with Nematocidal and Insecticidal Activities

Chemistry of Natural Compounds - One new and seven known secondary metabolites 1–8 were isolated, and the nematocidal and insecticidal activities of major compounds from Tanacetum...     

Ornamental Plant Efficiency for Heavy Metals Phytoextraction from Contaminated Soils Amended with Organic Materials

Accumulation of heavy metals (HMs) by ornamental plants (OPs) from contaminated agriculture soils is a unique technique that can efficiently reduce the metal load in the food chain. Amaranthus tricolor L. has attractive characteristics acquiring a higher growth rate and large biomass when grown at heavy metal contaminated soils. Site-specific detailed information is not available on the use of A. tricolor plant in metal phytoremediation from the polluted sites. The study aimed to enhance the uptake of HMs (Pb, Zn, and Cu) via amending poultry litter extract (PLE), vinasse sugarcane (VSC), and humic acid (HA) as natural mobilized organic materials compared to ethylene diamine tetraacetic acid (EDTA), as a common mobilized chemical agent by A. tricolor plant. The studied soils collected from Helwan, El-Gabal El-Asfar (Cairo Governorate), Arab El-Madabeg (Assiut Governorate), Egypt, and study have been conducted under pot condition. Our results revealed all organic materials in all studied soils, except EDTA in EL-Gabal El-Asfar soil, significantly increased the dry weight of the A. tricolor plant compared to the control treatment. The uptake of Pb and Zn significantly (p > 0.05) increased due to applying all organic materials to the studied soils. HA application caused the highest uptake as shown in Pb concentration by more than 5 times in Helwan soil and EDTA by 65% in El-Gabal El-Asfar soil while VSC increased it by 110% in El-Madabeg soil. Also, an increase in Zn concentration due to EDTA application was 58, 42, and 56% for Helwan, El-Gabal El-Asfar, and El-Madabeg soil, respectively. In all studied soils, the application of organic materials increased the remediation factor (RF) than the control. El-Madabeg soil treated with vinasse sugarcane gave the highest RF values; 6.40, 3.26, and 4.02% for Pb, Zn, and Cu, respectively, than the control. Thus, we identified A. tricolor as a successful ornamental candidate that, along with organic mobilization amendments, most efficiently develop soil health, reduce metal toxicity, and recommend remediation of heavy metal-contaminated soils. Additionally, long-term application of organic mobilization amendments and continued growth of A. tricolor under field conditions could be recommended for future directions to confirm the results.     

Thermal dry reforming of methane over La2O3 co-supported Ni/MgAl2O4 catalyst for hydrogen-rich syngas production

Research on Chemical Intermediates - The excess emission of greenhouse gases (GHGs) such as CO2 and CH4 is posing an acute threat to the environment, and efficient ways are being sought to utilize...     

Study of the interfacial charge transfer in bismuth vanadate/reduce graphene oxide (BiVO4/rGO) composite and evaluation of its photocatalytic activity

Research on Chemical Intermediates - We prepared unique BiVO4/reduce graphene oxide (BiVO4/rGO) nanocomposite with enhanced photocatalytic ability by hydrothermal method applying...     

Synthesis and Characterization of an α-Fe2O3-Decorated g-C3N4 Heterostructure for the Photocatalytic Removal of MO

This study describes the preparation of graphitic carbon nitride (g-C₃N₄), hematite (α-Fe₂O₃), and their g-C₃N₄/α-Fe₂O₃ heterostructure for the photocatalytic removal of methyl orange (MO) under visible light illumination. The facile hydrothermal approach was utilized for the preparation of the nanomaterials. Powder X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy dispersive X-ray (EDX), and Brunauer–Emmett–Teller (BET) were carried out to study the physiochemical and optoelectronic properties of all the synthesized photocatalysts. Based on the X-ray photoelectron spectroscopy (XPS) and UV-visible diffuse reflectance (DRS) results, an energy level diagram vs. SHE was established. The acquired results indicated that the nanocomposite exhibited a type-II heterojunction and degraded the MO dye by 97%. The degradation ability of the nanocomposite was higher than that of pristine g-C₃N₄ (41%) and α-Fe₂O₃ (30%) photocatalysts under 300 min of light irradiation. The formation of a type-II heterostructure with desirable band alignment and band edge positions for efficient interfacial charge carrier separation along with a larger specific surface area was collectively responsible for the higher photocatalytic efficiency of the g-C₃N₄/α-Fe₂O₃ nanocomposite. The mechanism of the nanocomposite was also studied through results obtained from UV-vis and XPS analyses. A reactive species trapping experiment confirmed the involvement of the superoxide radical anion (O₂^•−) as the key reactive oxygen species for MO removal. The degradation kinetics were also monitored, and the reaction was observed to be pseudo-first order. Moreover, the sustainability of the photocatalyst was also investigated.