Synthesis and characterization of amphiphilic fullerenes and their Langmuir-Blodgett films

We report here the synthesis and characterization of three amphiphilic fullerene derivatives and their Langmuir-Blodgett thin films. Two of the C(60) amphiphiles are mono-derivatives with a long alkyl chain terminated with either -COOH (2) or NH(2) (3) as the hydrophilic headgroup, and the third one (5) is designed to bear the same NH(2) group as 3 but with 10 additional hydrophobic alkyl chains grafted on the C(60) sphere (Scheme 1). These amphiphiles form stable, ordered monolayers at the air-water interface. The molecular packing at the air-water interface and the mean area per molecule are determined by pressure isotherms at room temperature. Hysteresis of pressure isotherms of side chain C(60) (5) shows complete reversibility upon compression and decompression, which suggests that side chains on the C(60) sphere inhibit formation of aggregates at the air-water interface. Comparative studies of all three amphiphiles allow us to better determine the interaction between C(60)'s and their self-assembly kinetics at the air-water interface. Monolayers of monoderivatized amphiphiles (2 and 3) were transferred successfully onto quartz substrates as Z-type multilayered Langmuir-Blodgett films, and monolayers of 5 were transferred as Y-type films. Detailed characterization of the multilayer films (Z-type deposition) prepared from amine-terminated C(60) (3) using X-ray and neutron reflectometry reveals staggering of C(60) spheres and a head-to-head (Y-type) structure presumably due to flipping and reattaching of C(60) amphiphiles to the previous underlying C(60) layer.     

A new synthetic entry to phosphinophosphinidene complexes. Synthesis and structural characterisation of the first side-on bonded and the first terminally bonded phosphinophosphinidene zirconium complexes [mu-(1,2:2-eta-tBu2P=P)[Zr(Cl)Cp2]2] and [[Zr(PPhMe2)Cp2](eta1)-P-PtBu2)

The reactions of lithiated diphosphanes with transition metal chlorides constitute a new general entry to phosphinophosphinidene complexes: the reaction of Cp2ZrCl2(Cp = C5H5) with tBu2P-P(SiMe3)Li (molar ratio approximately 1:1) yields [mu-(1,2:2-eta-tBu2P=P)[Zr(Cl)Cp2]2]; the reaction of Cp2ZrCl2 with tBu2P-P(SiMe3)Li (molar ratio approximately 1:2) and an excess of PPhMe2 in DME yields the first terminally bonded phosphinophosphinidene complex, [[Zr(PPhMe2)Cp2](eta1-P-PtBu2)].     

Determination of solid surface tension from particle-substrate pull-off forces measured with the atomic force microscope

Atomic force microscopy (AFM) is capable of solid surface characterization at the microscopic and submicroscopic scales. It can also be used for the determination of surface tension of solids (gamma) from pull-off force (F) measurements, followed by analysis of the measured F values using contact mechanics theoretical models. Although a majority of the literature gamma results was obtained using either Johnson-Kendall-Roberts (JKR) or Derjaguin-Muller-Toporov (DMT) models, re-analysis of the published experimental data presented in this paper indicates that these models are regularly misused. Additional complication in determination of gamma values using the AFM technique is that the measured pull-off forces have poor reproducibility. Reproducible and meaningful F values can be obtained with strict control over AFM experimental conditions during the pull-off force measurements (low humidity level, controlled and known loads) for high quality substrates and probes (surfaces should be free of heterogeneity, roughness, and contamination). Any probe or substrate imperfections complicate the interpretation of experimental results and often reduce the quality of the generated data. In this review, surface imperfection in terms of roughness and heterogeneity that influence the pull-off force are analyzed based upon the contact mechanics models. Simple correlations are proposed that could guide in selection and preparation of AFM probes and substrates for gamma determination and selection of loading conditions during the pull-off force measurements. Finally, the possibility of AFM measurements of solid surface tension using materials with rough surfaces is discussed.     

Molecular simulation of dendrimers and their mixtures under shear: comparison of isothermal-isobaric (NpT) and isothermal-isochoric (NVT) ensemble systems

Flow properties of dendrimers are studied with the aid of nonequilibrium molecular dynamics techniques. Simulations are performed in the NpT ensemble using the NpT-SLLOD algorithm [P. J. Davis and D. J. Evans, J. Chem. Phys. 100, 541 (1994)] and are compared to the results from simulations performed in the NVT ensemble reported earlier [J. T. Bosko, B. D. Todd, and R. J. Sadus, Chem. Phys. 121, 12050 (2004)]. Shear thickening observed at high strain rates vanishes in systems kept under constant pressure. Also the exponents in the power-law dependencies of the viscosity and the normal stress coefficients change. The variations are significant only at high strain rates and do not affect largely microscopic properties such as shape, alignment, or rotation of molecules. The NpT-SLLOD algorithm has been applied to study various systems including dendrimers in solution and their blends with linear chain molecules of the same molecular mass, and some results for these systems are presented.     

Effect of molecular topology on the transport properties of dendrimers in dilute solution at Theta temperature: a Brownian dynamics study

Structure and transport properties of dendrimers in dilute solution are studied with the aid of Brownian dynamics simulations. To investigate the effect of molecular topology on the properties, linear chain, star, and dendrimer molecules of comparable molecular weights are studied. A bead-spring chain model with finitely extensible springs and fluctuating hydrodynamic interactions is used to represent polymer molecules under Theta conditions. Structural properties as well as the diffusivity and zero-shear-rate intrinsic viscosity of polymers with varied degrees of branching are analyzed. Results for the free-draining case are compared to and found in very good agreement with the Rouse model predictions. Translational diffusivity is evaluated and the difference between the short-time and long-time behavior due to dynamic correlations is observed. Incorporation of hydrodynamic interactions is found to be sufficient to reproduce the maximum in the intrinsic viscosity versus molecular weight observed experimentally for dendrimers. Results of the nonequilibrium Brownian dynamics simulations of dendrimers and linear chain polymers subjected to a planar shear flow in a wide range of strain rates are also reported. The flow-induced molecular deformation of molecules is found to decrease hydrodynamic interactions and lead to the appearance of shear thickening. Further, branching is found to suppress flow-induced molecular alignment and deformation.     

Fuzzy Quantum Logics as a Basis for Quantum Probability Theory

Representation of an abstract quantum logic withan ordering set of states S in the form of a family L(S) of fuzzy subsets of S which fulfils conditionsanalogous to Kolmogorovian conditions imposed on -algebra of random events allows us toconstruct quantum probability calculus in a waycompletely parallel to the classical Kolmogorovianprobability calculus. It is shown that the quantumprobability calculus so constructed is a propergeneralization of the classical Kolmogorovian one. Someindications for building a phase-space representation ofquantum mechanics free of the problem of negativeprobabilities are given.     

Vermiculite decorated with copper nanoparticles: Novel antibacterial hybrid material

Vermiculite decorated with copper nanoparticles is a new antibacterial material that was prepared in this study through ion-exchange process and hydrogen reduction. The replacement of magnesium ions in interlayer structure was carried out using concentrated copper sulfate solutions at elevated temperature. Copper ions were reduced to elemental copper at 400-600 °C using hydrogen as the reducing agent. During the reduction process copper diffused primarily to vermiculite surface regions and formed copper nanoparticles with a broad range of sizes, from ∼1 to 400 nm. Strong adhesion of copper nanoparticles to the vermiculite carrier makes this hybrid very stable and durable. The new vermiculite-metallic copper hybrid material shows strong antibacterial activity against Staphylococcus aureus at 37 °C. Vermiculite is an inexpensive mineral that is very stable under a wide range of industrial and environmental conditions, and extensively used as filler in fireproof materials, plastics, paints and lightweight concrete, so the addition of copper as an antibacterial agent opens new avenues for the application of vermiculite in consumer products and other areas.     

Origins of thermodynamically stable superhydrophobicity of boron nitride nanotubes coatings

Superhydrophobic surfaces are attractive as self-cleaning protective coatings in harsh environments with extreme temperatures and pH levels. Hexagonal phase boron nitride (h-BN) films are promising protective coatings due to their extraordinary chemical and thermal stability. However, their high surface energy makes them hydrophilic and thus not applicable as water repelling coatings. Our recent discovery on the superhydrophobicity of boron nitride nanotubes (BNNTs) is thus contradicting with the fact that BN materials would not be hydrophobic. To resolve this contradiction, we have investigated BNNT coatings by time-dependent contact angle measurement, thermogravimetry, IR spectroscopy, and electron microscopy. We found that the wettability of BNNTs is determined by the packing density, orientation, length of nanotubes, and the environmental condition. The origins of superhydrophobicity of these BNNT coatings are identified as (1) surface morphology and (2) hydrocarbon adsorbates on BNNTs. Hydrocarbon molecules adsorb spontaneously on the curved surfaces of nanotubes more intensively than on flat surfaces of BN films. This means the surface energy of BNNTs was enhanced by their large curvatures and thus increased the affinity of BNNTs to adsorb airborne molecules, which in turn would reduce the surface energy of BNNTs and make them hydrophobic. Our study revealed that both high-temperature and UV-ozone treatments can remove these adsorbates and lead to restitution of hydrophilic BN surface. However, nanotubes have a unique capability in building a hydrophobic layer of adsorbates after a few hours of exposure to ambient air.     

Synthesis and Optical Properties of Various Thienyl Derivatives of Pyrene

A series of various thienyl derivatives of pyrene were synthesized by Stille cross-coupling procedure. Their structures were characterized by ¹H NMR, ¹³C NMR and elemental analysis. The spectroscopic characteristics were investigated by UV–vis absorption and fluorescence spectra. Based on quantum chemical calculations, the energy levels of investigated molecules with respect to the pyrene molecule were also discussed.     

Fundamental and harmonic mode-locking in erbium-doped fiber laser based on graphene saturable absorber

Graphene-based passively mode-locked erbium doped fiber laser is presented. Multilayer graphene was obtained by mechanical exfoliation of pure graphitic block and deposited on the fiber ferrule. The mode-locking performance was investigated under various laser pumping conditions. The laser could operate at fundamental repetition rate of 16.34 MHz with 844 fs pulse duration and 30 mW average output power. Also harmonic-mode locking of the laser is demonstrated. 294 and 800 MHz repetition rates were obtained (corresponding to the 18th and 49th harmonic of the fundamental repetition frequency, respectively) with nearly transform-limited pulses.