Effect of residual lignin and heteropolysaccharides in nanofibrillar cellulose and nanopaper from wood fibers

Unbleached (UN), oxygen-delignified and fully-bleached (FB) birch fibers with a residual lignin content of ca. 3, 2 and <1 %, respectively, were used to produce nanofibrillated cellulose (NFC) and nanopaper by using an overpressure device. The tensile index, elongation and elastic modulus of nanopaper were compared and the effect of residual cell wall components accessed. Under similar manufacturing conditions, UN NFC produced nanopaper with a density of 0.99 g/cm³, higher than that from FB NFC (0.7 g/cm³). This translated in much lower air permeability in the case of UN nanopaper (1 and 11 mL/min for UN and FB samples, respectively). Fundamentally, these observations are ascribed to the finer fibrils produced during microfluidization of UN fibers compared to those from lower yield counterparts (AFM roughness of 8 and 17 nm and surface areas of 124 and 98 m²/g for NFC from UN and FB fibers, respectively). As a result, values of stress at break and energy absorption of nanopaper from high yield fibers are distinctively higher than those from fully bleached NFC. Interactions of water with the surface and bulk material were affected by the chemical composition and structure of the nanofibrils. While UN nanopaper presented higher water contact angles their sorption capacity (and rate of water absorption) was much higher than those measured for nanopaper from FB NFC. These and other observations provided in this contribution are proposed to be related to the mechanoradical scavenging capacity of lignin in high shear microfluidization and the presence of residual heteropolysaccharides.     

Promoter effect of BaO on CO oxidation on PdO surfaces

The effect of bulk BaO promoter on CO oxidation activity of palladium oxide phase was studied by density functional calculations. A series of BaO(100) supported Pd(x)O(y) thin layer models were constructed, and energy profiles for CO oxidation on the films were calculated and compared with corresponding profiles for the most stable PdO bulk surfaces PdO(100) and PdO(101). The most stable of the thin films typically exhibit the same PdO(100) and PdO(101) surface planes; the PdO(100) dominates already with double layer thickness. The supporting promoter improves the CO oxidation activity of the Pd(x)O(y) phase via a direct electronic effect and introduced structural strain and corrugation. Changes in CO adsorption strength are reflected in oxidation energy barriers, and the promoting effect of even 0.3 eV can be seen locally. Easier oxygen vacancy formation may partially facilitate the reaction.     

Inner functions in weak Besov spaces

It is shown that inner functions in weak Besov spaces are precisely the exponential Blaschke products.     

The enumeration of cyclic mutually nearly orthogonal Latin squares

In this paper, we study collections of mutually nearly orthogonal Latin squares (MNOLS), which come from a modification of the orthogonality condition for mutually orthogonal Latin squares. In particular, we find the maximum such that there exists a set of cyclic MNOLS of order for , as well as providing a full enumeration of sets and lists of cyclic MNOLS of order under a variety of equivalences with . This resolves in the negative a conjecture that proposed that the maximum for which a set of cyclic MNOLS of order exists is .     

The structure of strained perovskite KTaO(3) thin films prepared by pulsed laser deposition

Epitaxial perovskite potassium tantalate (KTaO(3)) films with thicknesses of 7.4-36?nm are grown on SrTiO(3)(001) substrates by pulsed laser deposition. X-ray diffraction (XRD) analysis reveals evolution of lattice strain with increasing film thickness. A biaxial compressive in-plane strain as large as -?2.1% is obtained in the 7.4?nm-thick film. A bi-layer microstructure is detected in the 18?nm-thick film, suggesting the possibility for an abrupt strain relaxation.     

Content of phenolic compounds in aerial parts of Chamomilla suaveolens from Estonia

The content of total polyphenols, flavonoids and coumarins in the aerial parts of pineapple weed (Chamomilla suaveolens (Pursh) Rydb.), growing wild in Estonia, was determined chromato-spectrophotometrically, and individual polyphenols were quantified using HPLC-DAD-MS/MS. The total content of polyphenols was rather similar in flowers (9.1-11.5%) and in whole aerial parts (8.4-10.9%) of pineapple weed. The upper one-third (1/3) and upper two-thirds (2/3) of the aerial parts contained more flavonoids (0.15 - 0.20%) than the flowers (0.12%). The content of coumarins showed no significant difference between the flowers and the upper 1/3 and 2/3 of the aerial parts. The main polyphenols in the flowers were dicaffeoylquinic acids (202-380 mkg/mL), chlorogenic acids (75-185 mkg/mL), and ferulic acid glycoside (61-124 mkg/mL). Also found were quercetin galactoside, apigenin acetylglucoside, malonylapigenin glucoside, as well as luteolin, quercetin and apigenin glycosides.     

Picosecond bismuth-doped fiber MOPFA for frequency conversion

We report the development of a bismuth-doped fiber master oscillator power fiber amplifier system. The system operates at 1177 nm, producing 28 ps pulses at 9.11 MHz repetition rate, with an output power of 150 mW and a peak pulse power of 580 W. We subsequently frequency double the output, resulting in a picosecond pulsed visible source operating at 588.5 nm, with a maximum average output power of 13.7 mW.