32P-postlabelling and mass spectrometric methods for analysis of bulky, polyaromatic carcinogen-DNA adducts in humans.

There has been significant recent progress toward the development of human carcinogen-DNA adduct biomonitoring methods. 32P-Postlabelling is a technique which has found wide application in human studies. 32P-Postlabelling involves enzymatic preparation and labelling of DNA samples, followed by chromatographic separation of carcinogen-nucleotide adducts from unadducted nucleotides. Thin-layer ion-exchange and high-performance liquid chromatography (HPLC) have been utilized. This paper critically reviews 32P-postlabelling methods for analysis of bulky, polyaromatic carcinogen-DNA adducts and details a strategy to optimize this technique for monitoring human samples. Development of a human carcinogen biomonitoring method requires that the biomarker meet certain criteria: that the biomarker be responsive to exposures known to increase human cancer risk, to reductions in those exposures, and to the influence of metabolic differences. In addition, reliable samples must be available by non-invasive means. The ability of 32P-postlabelling to meet these criteria is traced in the literature and discussed. Identification of specific carcinogen-DNA adducts is a difficult task due to the low (femtomole) levels in human target tissues. Because co-chromatography in thin-layer chromatography (TLC) is generally not considered to be proof of chemical identity, both synchronous fluorescence and HPLC in conjunction with 32P-postlabelling and TLC are used to confirm the identity of specific carcinogen-DNA adducts in human samples. Mass spectrometry is a highly specific method, the sensitivity of which has been improved to the point which may allow its use to confirm the identity of carcinogen-DNA adducts isolated by 32P-postlabelling and other methods. The literature relating to the use of mass spectral techniques in carcinogen-DNA adduct analysis is reviewed.     

Carbon Dioxide Reforming of Methane over Ni Catalysts Supported on Al2O3 Modified with La2O3, MgO, and CaO

The preparation of synthesis gas from carbon dioxide reforming of methane (CDR) has attracted increasing attention. The present review mainly focuses on CDR to produce synthesis gas over Ni/MO_x/Al₂O₃ (X = La, Mg, Ca) catalysts. From the examination of various supported nickel catalysts, the promotional effects of La₂O₃, MgO, and CaO have been found. The addition of promoters to Al₂O₃-supported nickel catalysts enhances the catalytic activity as well as stability. The catalytic performance is strongly dependent on the loading amount of promoters. For example, the highest CH₄ and CO₂ conversion were obtained when the ratios of metal M to Al were in the range of 0.04–0.06. In the case of Ni/La₂O₃/Al₂O₃ catalyst, the highest CH₄ conversion (96%) and CO₂ conversion (97%) was achieved with the catalyst (La/Al = 0.05 (atom/atom)). For Ni/CaO/Al₂O₃ catalyst, the catalyst with Ca/Al = 0.04 (atom/atom) exhibited the highest CH₄ conversion (91%) and CO₂ conversion (92%) among the catalysts with various CaO content. Also, Ni/MgO/Al₂O₃ catalyst with Mg/Al = 0.06 (atom/atom) showed the highest CH₄ conversion (89%) and CO₂ conversion (90%) among the catalysts with various Mg/Al ratios. Thus it is most likely that the optimal ratios of M to Al for the highest activities of the catalysts are related to the highly dispersed metal species. In addition, the improved catalytic performance of Al₂O₃-supported nickel catalysts promoted with metal oxides is due to the strong interaction between Ni and metal oxide, the stabilization of metal oxide on Al₂O₃ and the basic property of metal oxide to prevent carbon formation.     

Structure and Catalytic Properties of Ceria-based Nickel Catalysts for CO<Subscript>2</Subscript> Reforming of Methane

Carbon dioxide reforming (CDR) of methane to synthesis gas over supported nickel catalysts has been reviewed. The present review mainly focuses on the advantage of ceria based nickel catalysts for the CDR of methane. Nickel catalysts supported on ceria–zirconia showed the highest activity for CDR than nickel supported on other oxides such as zirconia, ceria and alumina. The addition of zirconia to ceria enhances the catalytic activity as well as the catalyst stability. The catalytic performance also depends on the crystal structure of Ni–Ce–ZrO₂. For example, nickel catalysts co-precipitated with Ce_0.8Zr_0.2O₂ having cubic phase gave synthesis gas with CH₄ conversion more than 97% at 800 °C and the activity was maintained for 100 h during the reaction. On the contrary, Ni–Ce–ZrO₂ having tetragonal phase (Ce_0.8Zr_0.2O₂) or mixed oxide phase (Ce_0.5Zr_0.5O₂) deactivated during the reaction due to carbon formation. The enhanced catalytic performance of co-precipitated catalyst is attributed to a combination effect of nano-crystalline nature of cubic Ce_0.8Zr_0.2O₂ support and the finely dispersed nano size NiO _x crystallites, resulting in the intimate contact between Ni and Ce_0.8Zr_0.2O₂ particles. The Ni/Ce–ZrO₂/θ–Al₂O₃ also exhibited high catalytic activity during CDR with a synthesis gas conversion more than 97% at 800 °C without significant deactivation for more than 40 h. The high stability of the catalyst is mainly ascribed to the beneficial pre-coating of Ce–ZrO₂ resulting in the existence of stable NiO _x species, a strong interaction between Ni and the support, and an abundance of mobile oxygen species in itself. TPR results further confirmed that NiO _x formation was more favorable than NiO or NiAl₂O₄ formation and further results suggested the existence of strong metal-support interaction (SMSI) between Ni and the support. Some of the important factors to optimize the CDR of methane such as reaction temperature, space velocity, feed CO₂/CH₄ ratio and H₂O and/or O₂ addition were also examined.     

Investigation of sulfhydryl groups in cabbage phospholipase D by combination of derivatization methods and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

All eight cysteine residues in 92 kDa cabbage phospholipase D (PLD), deduced from the cDNA sequence, were shown to have free sulfhydryl groups by analysis using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) of tryptic peptides of PLD derivatized with p-chloromercurybenzoate, iodoacetic acid, and N-ethylmaleimide, as well as of underivatized PLD. Assignment of sulfhydryl groups by any one method was not conclusive. However, complementary information derived from tryptic peptides derivatized with different reagents made full assignment of sulfhydryl groups possible.     

Synthesis and characterization of grafted/crosslinked proton conducting membranes based on amphiphilic PVDF copolymer

A novel graft copolymer consisting of a poly(vinylidene fluoride‐co‐chlorotrifluoroethylene) backbone and poly(glycidyl methacrylate) side chains, that is, P(VDF‐co‐CTFE)‐g‐PGMA, was synthesized through atom transfer radical polymerization (ATRP) using CTFE units as a macroinitiator. Successful synthesis and microphase‐separated structure of the polymer were confirmed by ¹H NMR, FTIR spectroscopy, and TEM. As‐synthesized P(VDF‐co‐CTFE)‐g‐PGMA copolymer was sulfonated by sodium bisulfite, followed by thermal crosslinking with sulfosuccinic acid (SA) via the esterification to produce grafted/crosslinked polymer electrolyte membranes. The IEC values continuously increased with increasing SA content but water uptake increased with SA content up to 10 wt %, above which it decreased again as a result of competitive effect between crosslinking and hydrophilicity of membranes. At 20 wt % of SA content, the proton conductivity reached 0.057 and 0.11 S/cm at 20 and 80 °C, respectively. The grafted/crosslinked P(VDF‐co‐CTFE)‐g‐PGMA/SA membranes exhibited good mechanical properties (>400 MPa of Young's modulus) and high thermal stability (up to 300 °C), as determined by a universal testing machine (UTM) and TGA, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1110–1117, 2010     

State-dependent biasing method for importance sampling in the weighted stochastic simulation algorithm

The weighted stochastic simulation algorithm (wSSA) was developed by Kuwahara and Mura [J. Chem. Phys. 129, 165101 (2008)] to efficiently estimate the probabilities of rare events in discrete stochastic systems. The wSSA uses importance sampling to enhance the statistical accuracy in the estimation of the probability of the rare event. The original algorithm biases the reaction selection step with a fixed importance sampling parameter. In this paper, we introduce a novel method where the biasing parameter is state-dependent. The new method features improved accuracy, efficiency, and robustness.     

Selective formation of a latticed nanostructure with the precise alignment of DNA-templated gold nanowires

A very efficient method is introduced to selectively align and uniformly separate λ-DNA molecules and thus DNA-templated gold nanowires (AuNW's) using a combination of molecular combing and surface-patterning techniques. By the method presented in this work, it is possible to obtain parallel and latticed nanostructures consisting of DNA molecules and thus DNA-templated AuNW's aligned at 400 nm intervals. DNA-templated AuNW's are uniformly formed with an average height of 2.5 nm. This method is expected to hold potential for the integration of nanosized building blocks applicable to nanodevice construction.     

Vibration suppression of a cantilever beam using magnetically tuned-mass-damper

Eddy currents are induced by the movement of a conductor through a stationary magnetic field or a time varying magnetic field through a stationary conductor. These currents circulate in the conductive material and are dissipated, causing a repulsive force between the magnet and the conductor. These electromagnetic forces can be used to suppress the vibrations of a flexible structure. A tuned mass damper is a device mounted in structures to reduce the amplitude of mechanical vibrations and is one of the effective vibration suppression methods. In the present study, an improved concept of this tuned mass damper for the vibration suppression of structures is introduced. This concept consists of the classical tuned mass damper and an eddy current damping. The important advantages of this magnetically tuned mass damper are that it is relatively simple to apply, it does not require any electronic devices and external power, and it is effective on the vibration suppression. The proposed concept is designed for a cantilever beam and the analytical studies on the eddy current damping and its effects on the vibration suppression. To show the effectiveness of the proposed concept and verify the eddy current damping model, experiments on a cantilever beam are performed. It is found that the proposed concept could significantly increase the damping effect of the tuned mass damper even if not adequately tuned.     

1,3,5‐Tri‐p‐tolyl­biuret

MoOCl₂(L_OMe) as catalyst, where L_OMe is CpCo[P(O)(OMe)₂]₃, reacts with p‐tolyl isocyanate to afford the title compound, C₂₃H₂₃N₃O₂. The structural features are the intramolecular hydrogen bond forming a six‐membered ring and a nearly planar arrangement of the biuret moiety. Each p‐tolyl phenyl ring is twisted by approximately 60–80° with respect to the others. The bond lengths N1—C22 of 1.357 (3) Å and N2—C23 of 1.333 (3) Å indicate that they are partial double bonds.