Metal-reinforced sulfonic-acid-modified zirconia for the removal of trace olefins from aromatics

Metal-reinforced sulfonic-acid-modified zirconia catalysts were successfully prepared and used to remove trace olefins from aromatics in a fixed-bed reactor. Catalysts were characterized by ICP-OES, N₂ adsorption–desorption, X-ray diffraction, thermogravimetric analysis (TGA), and pyridine-FTIR spectroscopy. Different metals and calcination temperatures had great influence on the catalytic activity. Alumina-reinforced sulfated zirconia exhibited outstanding catalytic performance, stable regeneration activity, and giant surface area, and are promising in industrial catalysis. TGA showed that the decomposition of methyl could be attributed to Brønsted acid sites, and pyridine-FTIR spectroscopy proved the weak Brønsted sites on these synthesized metal-reinforced sulfated zirconia. Also, a relation between the reaction rate and weak Brønsted acid density is proposed.     

Metal–Organic Gels from Silver Nanoclusters with Aggregation-Induced Emission and Fluorescence-to-Phosphorescence Switching

Luminescent metal nanoclusters (NCs) are emerging as a new class of functional materials that have rich physicochemical properties and wide potential applications. In recent years, it has been found that some metal NCs undergo aggregation-induced emission (AIE) and an interesting fluorescence-to-phosphorescence (F-P) switching in solutions. However, insights of both the AIE and the F-P switching remain largely unknown. Now, gelation of water soluble, atomically precise Ag₉ NCs is achieved by the addition of antisolvent. Self-assembly of Ag₉ NCs into entangled fibers was confirmed, during which AIE was observed together with an F-P switching occurring within a narrow time scale. Structural evaluation indicates the fibers are highly ordered. The self-assembly of Ag₉ NCs and their photoluminescent property are thermally reversible, making the metal–organic gels good candidates for luminescent ratiometric thermometers.     

黄体酮纳米胶束构建及体外释放行为

为了制备可缓释释放的黄体酮纳米胶束新剂型,构建了两嵌段聚合物载体聚乙二醇-聚丙烯基缩水甘油醚(PEG-PAGE),组装成胶束,对黄体酮担载,考察不同条件下的载药量和包封率,筛选出最佳比例,并进行体外释放研究。 结果表明,该胶束能够担载黄体酮,载药量为4.26%,包封率为21.30%,48 h内累计释放达61.31%,能够有效地延缓黄体酮的释放,为黄体酮纳米剂型的开发提供了实验和技术参考。     

水和白酒中异味物质检测的研究进展

综述了水和白酒中异味物质检测的样品前处理方法(包括液液萃取、固相萃取、液相微萃取、固相微萃取、搅拌棒吸附萃取、吹扫捕集、顶空等)和检测方法(包括气相色谱法、气相色谱-质谱法、气相色谱-飞行时间质谱法)的研究进展(引用文献52篇)。     

A Chinese Lantern-like 2D Cu(Ⅱ) Coordination Polymer Constructed by Bis-imidazole and Dicarboxylate Co-ligands: Synthesis,Crystal Structure and Photocatalytic Activity

A new Cu(II) coordination polymer, {[Cu(1,3-BIP)(TFBDC)]·DMF}n(1,1,3-BIP is a 1,3-bis(imidazole)propane, and H2TFBDC is 2,3,5,6-tetrafluoroterephthalic acid) was prepared under solvothermal conditions and characterized by single-crystal and powder X-ray diffraction, IR spectra, thermogravimetric analyses and elemental analyses. The single-crystal X-ray diffraction reveals that metal coordination polymer 1(MCP 1) shows a two-dimensional sheet layer structure, which is further reinforced through strong intermolecular hydrogen bonding to form a 3 D supramolecular framework. Furthermore, the photocatalytic experiment result indicates the degradation ratios of methyl orange(MO) reach 83.4% within 180 minutes when MCP 1 acts as catalyst.     

超高效液相色谱-质谱联用法监测人心房钠尿肽的化学合成

多肽作为神经递质、激素、受体等参与和调节许多重要的生命过程。随着对多肽结构与功能认识的深入,化学合成多肽在生物医药、生命分析等领域显示了重要价值。人心房钠尿肽（ANP）是一种由28个氨基酸组成的多肽类激素,其含量和代谢异常与心血管疾病、癌症等密切相关。针对ANP重要的生理功能,该文开展了ANP化学合成及其过程的监测与优化,设计了集固相合成线性直链多肽和液相氧化成环为一体的策略。基于高效液相色谱的分离性能和多级质谱的结构鉴定能力,建立了超高效液相色谱-串联质谱（UHPLC-MS/MS）分析新方法,对固相合成产物进行了分离分析,并对液相氧化方法进行了筛选和优化,最终分离纯化得到了目标多肽,为人心房钠尿肽的高效化学合成及氧化成环反应提供借鉴。     

离子液体为背景电解质的毛细管电泳-间接紫外检测法同时测定葡萄酒中无机阴离子和阳离子

以离子液体1-乙基-3-甲基咪唑对甲苯磺酸盐（[EMIm]TS）为背景电解质,采用双端进样方式,实现了毛细管电泳-间接紫外检测法同时分析测定葡萄酒中无机阳离子（K⁺、Ca²⁺、Na⁺、Mg²⁺和Li⁺）和阴离子（Cl^-、SO₄^2-和ClO₃^-）。[EMIm]TS作为电泳缓冲溶液的同时,其阳离子和阴离子分别作为样品中阳离子和阴离子组分的间接紫外检测的背景电解质。在最佳分析条件下,可在6.5 min内完成8种无机离子的同时分离检测,其线性范围为0.005~0.7 g/L,相关系数为0.963~0.995,检出限（S/N=3）为1.2~12.5 mg/L。该方法成功测定了3种不同品牌的市售葡萄酒中8种无机离子。在3个加标水平下,8种无机离子的回收率为90.1%~110.5%,相对标准偏差（RSD）≤ 4.8%。结果表明,该方法可应用于葡萄酒中无机阴、阳离子的同时分离检测,且方法简单、快速且结果可靠。     

固相萃取-超高效液相色谱法测定人参中5种原人参二醇型人参皂苷的含量

建立了固相萃取-超高效液相色谱测定人参中5种原人参二醇型人参皂苷的方法。人参药材经粉碎后通过水饱和正丁醇溶液进行超声提取,经过亲水作用固相萃取柱净化后,在ACQUITY UPLC BEH Shield RP18色谱柱（100 mm×2.1 mm,1.7 μm）上分离,利用乙腈/水作为流动相进行梯度洗脱,采用光电二极管阵列检测器检测。结果表明,5种原人参二醇型人参皂苷在5~500 μg/mL范围内具有很好的线性关系,相关系数均大于0.999。方法精密度的RSD值在0.95%~2.62%（n=6）之间,22 h内样品稳定性的RSD值在0.90%~2.15%（n=8）之间,日内和日间重复性的RSD值分别为5.35%~6.47%（n=6）和5.56%~6.34%（n=8）。方法的加标回收率在87.16%~101.92%之间,相对标准偏差在1.54%~4.01%（n=6）之间。所建立的方法采用亲水作用色谱模式的固相萃取材料,药材的提取液可直接作为固相萃取的上样溶液进行人参皂苷的富集和净化,并且超高效液相色谱大大缩短了分析时间。该方法简单快速、通量高、重现性好,适用于人参中5种原人参二醇型人参皂苷的定量分析。     

悬浮固化-分散液液微萃取-液相色谱-串联质谱测定纺织废水中磷系阻燃剂

建立了悬浮固化-分散液液微萃取结合液相色谱-串联质谱测定纺织废水中5种痕量磷系阻燃剂的方法。通过对萃取过程中萃取剂、分散剂的种类与体积、盐浓度、溶液pH值等对萃取效率的影响因素优化,确立了最佳萃取条件。采用了密度小于水的十一烷醇（400 μL）为萃取剂,甲醇（300 μL）为分散剂,控制溶液pH值在6~9之间,NaCl添加量为2 g,萃取时间为涡旋2 min。在优化的萃取条件下,该方法在2~100 μg/L均有良好的线性关系,相关系数大于0.995,除二（2,3-二溴丙基）磷酸酯（BIS）的检出限为5 μg/L外,三（2-氯乙基）磷酸酯（TCEP）、三（1,3-二氯-异丙基）磷酸酯（TDCP）、三（1-氮丙啶基）氧化膦（TEPA）和三（2,3-二溴丙基）磷酸酯（TRIS）的检出限均为2 μg/L。后整理、染色和印花等实际废水样品加标试验表明,方法的平均回收率为71.6%~114.5%,RSD为2.7%~11.2%（n=6）。对11个样品进行检测,其中3个废水样品检出TCEP与TDCP化合物,含量为2.6~3.4 μg/L。本方法简单,快速,灵敏度好且环保绿色,能够对纺织废水中的5种痕量磷系阻燃剂进行准确的定性与定量检测。     

稀土(Gd3+,La3+)对Eu(p-MOBA)3phen/PMMA荧光及温敏特性的影响

以稀土氧化物(Eu_2O_3,Gd_2O_3,La_2O_3)、对甲氧基苯甲酸(p-MOBA)、菲咯啉(phen)为原料制备了不同稀土离子(Gd~(3+),La~(3+))掺杂的Eu(p-MOBA)_3phen探针分子。将所合成的探针分子与甲基丙烯酸甲酯(MMA)混合,以过氧化苯甲酰(BPO)为引发剂引发聚合,制得不同稀土(Gd~(3+),La~(3+))掺杂的Eu(p-MOBA)_3phen/PMMA温敏漆样品。利用扫描电镜、紫外-可见吸收光谱、红外光谱和荧光光谱对探针分子的形貌、结构、发光性能及温敏漆的荧光温度猝灭特性进行表征。红外光谱、紫外可见吸收光谱及扫描电镜能谱分析表明,Eu~(3+)与配体p-MOBA、phen成功配位,且掺入的稀土离子(Gd~(3+),La~(3+))未改变Eu(p-MOBA)_3phen结构,说明掺入的稀土离子(Gd~(3+),La~(3+))部分取代了Eu~(3+)。荧光光谱表明,稀土离子(Gd~(3+),La~(3+))的掺入对Eu(p-MOBA)_3phen的发光均具有增益作用,并且相应的温敏漆在50～100℃温度范围内都具有良好的荧光温度猝灭特性。而且相比于镧掺杂的Eu(p-MOBA)_3phen/PMMA,钆掺杂的Eu(p-MOBA)_3phen/PMMA具有更强的荧光发射和更高的测温灵敏度。可见,不同的稀土(Gd~(3+),La~(3+))对Eu(p-MOBA)_3phen/PMMA的荧光及温敏特性影响是不同的。