Continuous Detection of pH‐responsive Drug Delivery System in Cells in situ by Confocal Laser Scanning Microscopy

Mesoporous silica nanoparticles (MSN) were coated by pH‐responsive polymer chitosan‐poly (methacrylic acid) (CS‐PMAA). This nano drug delivery system showed good application prospects and the polymer‐coated microspheres were promising site‐specific anticancer drug delivery carriers in biomedical field. A continuous detection of pH‐responsive drug delivery system in cells in situ, utilizing MSN/CS‐PMAA composite microspheres, was proposed. Two kinds of different cell lines, tumor cell line (Hela) and normal somatic cells (293T), were used to investigate the behaviours of the drug loaded system in the cells. Conclusions could be drawn from the fluorescent images obtained by confocal laser scanning microscopy (CLSM), modified drug‐loaded microspheres (MSN/CS‐PMAA) were ingested into cells more easily, the uptake of DOX@FITC‐MSN/CS‐PMAA by HeLa/293T cells were performed at pH 7.4/pH 6.8, DOX was released during the ingestion process, fluorescence intensity decreased with time because of efflux transport and photo‐bleaching. Fluoresence detection by flow cytometry was performed as comparison. The continuous fluorescent observation in situ could be widely used in the pH‐responsive releasing process of drug delivery system in the cells.     

载银sod基纳米分子筛的合成及抗菌性能

采用两步法合成了 sod 基系列分子筛(EMT、FAU、SOD),并通过离子交换法引入 Ag⁺得到载银分子筛,通过 X 射线衍射(XRD)、扫描电子显微镜(SEM)证明离子交换前后分子筛骨架结构和晶粒尺寸没有发生明显变化;通过红外光谱(IR)、热重(TG)证明制得的载银分子筛具有良好的稳定性;对获得的载银分子筛进行了Ag⁺释放实验与抗菌能力测试,考察了分子筛种类和晶粒尺寸对抗菌性能的影响。结果表明具有笼状结构的FAU与EMT分子筛因可储存更多的Ag⁺而具有更好的抗菌性能,而具有超笼结构的 FAU 分子筛抗菌性能最优。通过对比不同晶粒尺寸载银 FAU 分子筛抗菌数据发现,晶粒尺寸为 100 nm 的载银FAU分子筛因外表面丰富的抗菌活性位点以及其内部可以储存并不断释放 Ag⁺而具有最优的抗菌性能和抗菌寿命。而晶粒尺寸为10 nm的载银FAU分子筛由于晶粒尺寸较小、外比表面积大、扩散路径短,Ag⁺的释放速率最快,抗菌效率最高。     

四氯合钴(Ⅱ)-4-氯苄基吡啶季铵盐的制备及其晶体结构和抗菌性能

合成了1种含四氯合钴配阴离子的4-氯苄基吡啶季铵盐[4-ClBzPy]2[CoCl4];利用元素分析仪、X射线单晶衍射仪以及紫外光谱仪和红外光谱仪等分析了其组成、晶体结构及光谱学性质;利用电导仪测定了[4-ClBzPy]2[CoCl4]的电导,并检测了其对金黄色葡萄球菌和大肠杆菌的抗菌活性.结果表明,合成的[4-ClBzPy]2[CoCl4]季铵盐为单斜晶系,P2(1)/c空间群,晶胞参数为a=0.769 5(13)nm,b=1.895 1(3)nm,c=0.946 3(15)nm,β=93.183(2)°,V=1.378 0(4)nm3,Z=2,Dc=1.470g/cm3,GOOF=1.007,R1=0.041 8,wR2=0.100 2.与此同时,季铵盐[4-ClBzPy]2[CoCl4]对金黄色葡萄球菌和大肠杆菌均具有较好的抗菌活性.     

高效液相色谱-串联质谱法检测食品中6种邻苯二甲酸酯

建立了食品中邻苯二甲酸二丁酯(DBP)、邻苯二甲酸丁基苄基酯(BBP)、邻苯二甲酸二已酯(DEHP)、邻苯二甲酸二正苄酯(DNOP)、邻苯二甲酸二异壬酯(DINP)、邻苯二甲酸二异癸酯(DIDP)6种邻苯二甲酸酯的高效液相色谱-串联质谱检测方法。试样用正己烷∶甲基叔丁基醚∶乙腈(体积比为50∶45∶5)提取并冷冻离心去除脂肪,收集溶剂层并挥干,加入0.5g乙二胺-N-丙基硅烷(PSA)并用2mL乙腈溶液混匀,冷冻离心后过膜备用。优化分离与检测的最佳条件,采用电喷雾正离子电离(ESI+)模式和多离子反应监控(MRM)模式,外标法进行定量。该方法中DBP、BBP、DEHP、DNOP在0.1～3.0mg/L之间,DINP和DIDP在1.0～30.0mg/L之间的线性相关系数R2>0.995;检测限分别为:DBP 0.02mg/L,BBP、DEHP和DNOP 0.005mg/L,DINP和DIDP 0.10mg/L。在添加水平为0.2、0.5、1.0mg/kg时的平均加标回收率和相对标准偏差范围符合食品检测要求。该方法简便、灵敏、精确,适用于检测食品中6种邻苯二甲酸酯残留。     

电感耦合等离子体原子发射光谱法测定钛合金中钨、铌、钽

采用电感耦合等离子体原子发射光谱法（ICP-AES）法测定钛合金中W,Nb,Ta元素的含量。样品采用盐酸、氢氟酸和硝酸溶解,并对仪器工作参数和试验条件进行了优化试验,确定了仪器最佳工作条件,考察了钛合金基体和共存元素对待测元素的影响,确定了各待测元素谱线为W207．911nm,Nb309．418nm,Ta240．063nm。选定的待测元素分析线不受合金基体和共存元素的干扰,通过基体匹配消除基体的影响。加标回收率在98％104％之间,测定结果的相对标准偏差为0．3％～2．4％（n=8）,方法的检出限为0．003-0．013μg／mL。进行了标准物质对照试验,试验结果与标准值相符。     

食品中邻苯二甲酸酯类塑化剂的测定及迁移研究进展

综述了2009年以来食品中邻苯二甲酸酯类(PAEs)塑化剂在来源、分析测定方法及迁移方面的研究进展。提出了目前国内邻苯二甲酸酯检验时遇到的主要问题,以及面对食品危机应采取的态度。     

Effects of Zn, Al and Ti substitution on the electrochemical properties of LiNiO2 synthesized by the combustion method

LiNi_{1 ? y} Ti _y O₂ (0.000 ≤ y ≤ 0.100) and LiNi_0.990M_0.010O2 (M = Zn, Al, and Ti) were synthesized by the combustion method. The effects of Zn, Al and Ti substitution for Ni of LiNiO₂ on the electrochemical properties of LiNiO₂ were investigated. LiNi_0.995Ti_0.005O₂ has the largest first discharge capacity (188.1 mA h/g) among the Ti-substituted samples. LiNi_0.990Ti_0.010O₂ has a relatively large first discharge capacity (185.5 mA h/g) and a relatively good cycling performance. Among LiNi_0.990M_0.010O₂ (M = Ni, Zn, Al, and Ti), LiNiO₂ has the largest discharge capacities at a rate of 0.1 C from n = 1(189.3 mA h/g) to n = 10. LiNi_0.990Al_0.010O₂ has the lowest discharge capacities from n = 1 to n = 10, but it has the best cycling performance. LiNi_0.990Zn_0.010O₂ showed poor crystallinity, LiNi_0.990Ti_0.010O₂ showed high cation mixing, and LiNi_0.990Al_0.010O₂ had good crystallinity and showed low cation mixing. Fewer occurrence of phase transitions and the least change of the ?dx/|dV| vs. voltage curve at the second cycle from the curve at the first cycle of LiNi_0.990Al_0.010O₂ suggest that Al substitution stabilizes the structure and leads to a good cycling performance.     

Fe3+-H2O2-钙黄绿素-邻菲啰啉化学发光体系测定左旋多巴分析方法研究

提出了Fe3+-H2O2-钙黄绿素化学发光体系并用于左旋多巴的测定。在酸性介质中,Fe3+-H2O2-钙黄绿素-邻菲啰啉体系能产生明显的化学发光现象。加入左旋多巴后,对此化学发光强度具有显著的抑制作用,降低程度与体系中左旋多巴浓度呈良好的化学计量关系。据此,结合流动注射技术,建立了流动注射化学发光测定左旋多巴的方法。研究了影响化学发光强度的因素,并探讨了可能发生的机理。化学发光信号的降低值(ΔI)与左旋多巴浓度在2×10-8mol.L-1～2×10-6mol.L-1的范围内呈良好的线性关系,检出限为1.2×10-8mol.L-1。相对标准偏差为1.1%,该法用于片剂中左旋多巴含量的测定,结果令人满意。     

聚甲基乙撑碳酸酯/天然高分子复合材料研究进展

聚甲基乙撑碳酸酯(PPC)是一种新型热塑性脂肪族聚碳酸酯,具有良好的生物降解性、高阻隔性和生物相容性等优点,但其热性能和力学性能较差,通过物理和化学方法改性是提高其性能的重要研究方向之一。本文综述了近年来采用淀粉、纤维素和甲壳素等天然高分子对PPC的改性研究,尤其是天然高分子含量和预处理方法等对复合材料性能的影响,并对PPC/天然高分子复合材料的发展作了总结和展望。     

吩噻嗪染料亚甲基蓝共振瑞利散射法测利福平

建立了测定痕量利福平的共振瑞利散射(RRS)法。在NaOH溶液中,利福平与亚甲基蓝相互作用后,共振瑞利散射显著增强,在371 nm处的ΔIRRS最强。利福平的质量浓度在0.20～1.65 mg.L-1范围内与△IRRS成正比,检出限(3Sb/S)为0.038 mg.L-1。该法可用于人体血液及市售利福平药物中利福平含量的测定,结果满意。