Untersuchungen zur Wechselwirkung von gasf?rmigem molekularem Iod mit Silberoberfl?chen mittels XPS und AES

Summary The adsorption of gaseous molecular iodine on clean silver surfaces proceeds in the first stage by dissociative chemisorption. After the formation of half a monolayer of chemisorbed iodine atoms the formation of silver iodide begins, which forms a very regular overlayer on top of the substrate. Both iodine species can be distinguished due to a difference in chemical shift of the M₄N₄, ₅N₄, ₅-Auger transitions. After completion of this overlayer further iodine uptake is slowed down significantly. Above an overlayer thickness of about 10 nm a further progress of the reaction cannot be followed anymore due to the limited information depth of XPS.     

Crystallization and morphology of poly(vinylidene fluoride)/poly(3‐hydroxybutyrate) blends. I. Spherulitic morphology and growth by polarized microscopy

The development of the poly(3‐hydroxybutyrate) (PHB) morphology in the presence of already existent poly(vinylidene fluoride) (PVDF) spherulites was studied by two‐stage solidification with two separate crystallization temperatures. PVDF formed irregular dendrites at lower temperatures and regular, banded spherulites at elevated temperatures. The transition temperature of the spherulitic morphology from dendrites to regular, banded spherulites increased with increasing PVDF content. A remarkable amount of PHB was included in the PVDF dendrites, whereas PHB was rejected into the remaining melt from the banded spherulites. When PVDF crystallized as banded spherulites, PHB could consequently crystallize only around them, if at all. In contrast, PHB crystallized with a common growth front, starting from a defined site in the interfibrillar regions of volume‐filling PVDF dendrites. It formed by itself dendritic spherulites that included a large number of PVDF spherulites. For blends with a PHB content of more than 80 wt %, for which the PVDF dendrites were not volume‐filling, PHB first formed regular spherulites. Their growth started from outside the PVDF dendrites but could later interpenetrate them, and this made their own morphology dendritic. These PHB spherulites melted stepwise because the lamellae inside the PVDF dendrites melted at a lower temperature than those from outside. This reflected the regularity of the two fractions of the lamellae because that of those inside the dendrites of PVDF was controlled by the intraspherulitic order of PVDF, whereas that from outside was only controlled by the temperature and the melt composition. The described morphologies developed without mutual nucleating efficiency of the components. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 873–882, 2003     

Mathematical modelling of the oxidation of nickel titanium alloys

A one-dimensional bulk reaction model for the oxidation of nickeltitanium is formulated, with preferential oxidation of titaniumbeing included. The modelling is directed at the better understandingof the dominant mechanisms involved in the oxidation processand their significance for the biocompatibility of the alloy.Two different regimes for the relative diffusivities of oxygenand the metals are investigated. By assuming fast bulk reactions,different asymptotic structures emerge in different parameterregimes and the resulting models take the form of moving boundaryproblems. Different profiles of nickel concentration are obtained:in particular a nickel-rich layer (observed in practice) ispresent below the oxide/metal interface for the case when oxygenand the metals diffuse at comparable rates.     

Application of MMMA method: Dispersed superconductors and magnetic nanolayers

Microwave nonresonant dissipation observed around zero field makes a powerful method in characterizing superconducting state (to determineT _C,H _C1,H _CJ parameters). This review shows several successful applications of magnetically modulated microwave absorption (MMMA). MMMA enables to study MgB₂ superconducting nanoregions embedded in the Mg host structure. Application of MMMA to study intercalation of fullerence enabled the observation of a new superconducting phase. The pressure effect dT _C/dp has been studied below the percolation threshold in YBaCuO/PST composites. The local temperature of the Josephson junction measured by the MMMA technique showed that a granular superconductor consists of two phases: host phase and Josephson junction system. MMMA has been applied lately to separate the giant magnetoresistance from the magnetization effect in differential hysteresis loops.     

Bei der Zuckerbestimmung

Ohne Zusammenfassung     

Ueber die Bestimmung des sauren weinsauren Kaliums in den Rohweinsteinen und der Weinhefe

Ohne ZusammenfassungNieder-Ingelheim, 3. Mai 1885.     

Anionic iron(II) alkoxides as initiators for the controlled ring‐opening polymerization of lactide

Hetero‐bimetallic Fe(II) alkoxide/aryloxides were evaluated as initiators for the ring‐opening polymerization of rac‐lactide. [(THF)NaFe(O^tBu)₃]₂ ( 1 ) and [(THF)₄Na₂Fe(2,6‐diisopropylphenolate)₄] ( 2 ) (THF = tetrahydrofuran) both polymerized lactide efficiently at room temperature, with complex 1 affording better control over the molecular weight parameters of the resultant polymer. At conversions below 70%, a linear increase in molecular weight with conversion was observed, indicative of a well‐controlled polymerization process. Complex 2 is the first example of a dianionic Fe(II) alkoxide and has been structurally characterized to reveal a distorted square planar FeO₄ array in which both Na counterions bridge two aryloxide ligands and are further complexed by two THF ligands. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3798–3803, 2003     

Numerical approximation of generalized Newtonian fluids using Powell–Sabin–Heindl elements: I. theoretical estimates

In this paper we consider the numerical approximation of steady and unsteady generalized Newtonian fluid flows using divergence free finite elements generated by the Powell–Sabin–Heindl elements. We derive a priori and a posteriori finite element error estimates and prove convergence of the method of successive approximations for the steady flow case. A priori error estimates of unsteady flows are also considered. These results provide a theoretical foundation and supporting numerical studies are to be provided in Part II. Copyright © 2003 John Wiley & Sons, Ltd.     

Förster energy transfer from poly(arylene–ethynylene)s to an erbium–porphyrin complex

We study the infrared emission at 1.54 μm of an organolanthanide complex, Er(III)-tetraphenylporphyrin [Er(TPP)acac], both as a result of direct optical excitation and via energy transfer from host π-conjugate polymers of type poly(arylene–ethynylene) [PAE]. In the first case, the emission of the neat complex is characterized in inert transparent materials and a value of the quantum yield at 1.54 μm φ_IR=4×10⁻⁴ is measured. Then, fluorescence resonance transfer is investigated in blends of Er(TPP)acac with PAEs by monitoring the quenching of the polymer fluorescence along with the enhancement of both the visible emission of the ligand and the near-infrared band of Er³⁺. These different procedures allow a detailed analysis of the transfer efficiency within a specific implementation of the Förster model for polymeric donors. The experimental values of the critical radius R₀, ranging from 1.3 to 2.5 nm for the different blends, are in good agreement with theory for a wide interval of the physical and spectroscopic parameters. This suggests that other mechanisms for excitation transfer do not play a significant role in these materials.