An Improved HPLC Post-Column Methodology for the Identification of Free Radical Scavenging Phytochemicals in Complex Mixtures

The importance of natural antioxidants principally relates to their health-promoting properties. The discovery of new sources of established compounds or more potent compounds is a costly exercise and any technique capable of aiding this procedure would be highly significant. An approach combining chromatographic separation, component analysis and post-column identification of free radical scavenging has been reported. However, its effectiveness is dependent upon various factors and the number of samples analyzed without operator intervention is restricted. A more applicable technique using a 10% to 100% methanol with 2% acetic acid mobile phase and a citric acid-sodium citrate buffered methanolic 1,1-diphenyl-2-picrylhydrazyl free radical reagent is presented, whereby free radical scavengers can be detected within crude extracts of variable polarity without special considerations. As an illustration, acetone, 70% (aq.) methanol and acetonitrile-soluble extracts were prepared from sage (Salvia officinalis L.) for extraction of polar and non-polar radical scavengers and analyzed. Radical scavenging components were identified as carnosic, caffeic and rosmarinic acids and luteolin-7-O-glycoside. Others radical scavengers were tentatively identified as benzoic and hydroxycinnamic acid derivatives, flavonoids and diterpenoids. Through the application of this technique, carnosic acid and rosmarinic acid were identified as the principal free radical scavengers.     

A kinetic method for <Emphasis Type="Italic">para</Emphasis>-nitrophenol determination based on its inhibitory effect on the catalatic reaction of catalase

The inhibitory effect of para-nitrophenol on the catalytic reaction of catalase was investigated. Michaelis-Menten kinetic parameters were determined from Lineweaver-Burk plots obtained in the absence or in the presence of the inhibitor. The inhibitor pattern, revealed by the Lineweaver-Burk plots, suggested a fully mixed inhibition mechanism. Spectrophotometric monitoring of the indicator reaction: in conjunction with initial rate measurements was employed for the kinetic determination of the inhibitor. Calibration plots of initial rate vs. para-nitrophenol concentration were linear in the concentration range 0.9·10⁻⁵–2.5·10⁻⁵ mol/L and the detection limit was 3·10⁻⁶ mol/L (417 μg/L) para-nitrophenol. Interferences from other phenolic compounds like orto-cresole, meta-and orto-nitrophenol were observed.     

Structural characterisation of tyrosine-nitrated peptides by ultraviolet and infrared matrix-assisted laser desorption/ionisation Fourier transform ion cyclotron resonance mass spectrometry

Nitration of tyrosine residues in proteins may occur in cells upon oxidative stress and inflammation processes mediated through generation of reactive nitroxyl from peroxynitrite. Tyrosine nitration from oxidative pathways may generate cytotoxic species that cause protein dysfunction and pathogenesis. A number of protein nitrations in vivo have been reported and some specific Tyrosine nitration sites have been recently identified using mass spectrometric methods. High-resolution Fourier transform ion cyclotron resonance mass spectrometry (MALDI) FT-ICR-MS) is shown here to be a highly efficient method in the determination of protein nitrations. Following the identification of nitration of the catalytic site Tyr-430 residue of bovine prostacyclin synthase, we synthesised several model peptides containing both unmodified tyrosine and 3-nitro-tyrosine residues, using solid-phase peptide synthesis (SPPS). The structures of the nitrotyrosine peptides were characterised both by ESI- and by matrix-assisted laser desorption/ionisation (MALDI)-FT-ICR-MS, using a standard ultraviolet (UV) nitrogen nitrogen laser and a 2.97 microm Nd-YAG infrared laser. Using UV-MALDI-MS, 3-nitrotyrosyl-peptides were found to undergo extensive photochemical fragmentation at the nitrophenyl group, which may hamper or prevent the unequivocal identification of Tyr-nitrations in cellular proteins. In contrast, infrared-MALDI-FT-ICR-MS did not produce fragmentation of molecular ions of Tyr-nitrated peptides.     

Investigations for Modification of Polyacrylamide-Bentonite by Phytic Acid and its Usability in Fe3+, Zn2+ and UO2 2+ Adsorption

Composite of polyacrylamide-bentonite (PAA-B) was prepared by direct polymerisation of PAA in a suspension of bentonite (B). Adsorption and thermodynamic features of phytic acid (Phy) adsorption onto B, PAA and PAA-B, and those of Fe³⁺, Zn²⁺, UO₂ ²⁺ adsorption onto PAA-B and its modification by Phy (PAA-B-Phy) have been investigated. The reusability, storagability, ion selectivity and recoverability of sorbed ions with 1 M HCl have also been considered.The chemical and physical structure of adsorbents has been characterised by means of FT-IR and XRD. All adsorption isotherms for Phy and the ions were L-type of the Giles classification except, the one which is S type for adsorption of Phy onto PAA. The maximum adsorption capacities for the ions adsorbed were in order of UO₂ ²⁺ > Fe³⁺ > Zn²⁺ for PAA-B and Zn²⁺ > Fe³⁺ > UO₂ ²⁺ for PAA-B-Phy. Langmuir equilibrium constants for the adsorption of ions onto PAA-B-Phy were significantly higher than those found for PAA-B; the magnitude of increase for UO₂ ²⁺ was about 100. The thermodynamic parameters indicated that adsorption reactions are spontaneous in terms of adsorption free enthalpy.The chemical structure of PAA-B-Phy was not changed at the end of the studies of reusability and storagability. The composite was selective for UO₂ ²⁺ of the ions of interest.The composite of PAA-B and its modification by Phy have been used for the first time in this investigation. It is proposed that the composites can be practically used in the investigations and applications of adsorption.     

An Infrared Spectroscopic Study on the Hofmann-diam-type 1,12-Diaminododecanemetal(II) Tetracyanonickelate(II)-aromatic Guest Clathrates: M(H2N(CH2)12NH2)Ni(CN)4ċG(M=Co, Ni or Cd; G = Benzene, Naphthalene, Anthracene, Phenanthrene or Biphenyl)

Three Hofmann-diaminododecane-type clathrates of the form M(1,12-diaminododecane) Ni(CN)₄G (M = Co, Ni or Cd; G = benzene, naphthalene, anthracene, phenanthrene or biphenyl) have been prepared in powder form. The 1,12-diaminododecane molecules in the host lattice permit the inclusion of bulky guest molecules. The spectral features suggest that these compounds are similar in structure to the other Hofmann-diam-type clathrates.     

Comparative EIS study of a paste electrode containing zinc powder in neutral and near neutral solutions

The corrosion and passivation of Zn powder particles dispersed in a paste electrode immersed in 0.5 M Na₂SO₄ and 5×10^–3 M Na₂HPO₄ solutions were studied mainly by electrochemical impedance spectroscopy. The role played by diffusion in the mechanism of anodic oxidation of zinc powder particles has been shown. It was demonstrated that the anodic reactionof Zn powder in neutral or near neutral media involves at least two adsorbed intermediates. By simulating the porous structure of the electrode, some information about porous nature of zinc electrode could be extracted. Electronic Publication     

用SN型催化剂合成苯乙烯一丙烯嵌段共聚物的研究──Ⅰ．聚合条件对共聚合反应的影响

用稀土化合物改性的钛系载体催化剂（ＳＮ催化剂）进行苯乙烯和丙烯顺序嵌段共聚合（Ｓｅｑｕｅｎｔｉａｌｂｌｏｃｋｃｏｐｏｌｙｍｅｒｉｚａｔｉｏｎ）的研究．考察了苯乙烯预聚时间、单体比、外加给电子体（ＥＢ）、烷基铝浓度、催化剂浓度和聚合温度等条件对共聚合的影响．发现外加酯（ＥＢ）降低了共聚合反应催化活性，在ＥＢ／Ｔｉ摩尔比为５范围内，外酯有助于提高嵌段共聚物（ｉＰＳ—ｂ—ｉＰＰ）中ＰＳ段和ＰＰ段的等规度及增加苯乙烯链节含量．ＳＮ型催化剂对苯乙烯一丙烯嵌段共聚合有较高的催化活性，催化效率在１００ｇ聚合物／ｇ－Ｔｉ以上．共聚物通过溶剂革取分级除去均聚物后，所得嵌段共聚物中苯乙烯链节含量可在１５～８５ｍｏｌ％之间调节．其结构表征续见第ＩＩ报．     

Direct determination of manganese in vitamin-mineral tablets using solid sampling electrothermal atomic absorption spectrometry

Manganese in vitamin-minerals tablets was determined by solid sampling electrothermal atomic absorption spectrometry (SS-ETAAS) using three different calibration methods, namely calibration against aqueous standards, standard addition with aqueous standards on solid samples and calibration against solid certified standards. Samples were only finely ground and introduced directly into the furnace by means of solid autosampler system without any dissolving process. Effects of different calibration techniques, temperatures and heating rates of atomization and pyrolysis steps on the accuracy and precision of the analyte elements were investigated. After optimization of the experimental parameters, there is good agreement (at 95% confidence level) between the results obtained by solid sampling and those obtained by acid digestion of samples.     

Spectroscopic and photochemical properties of the lichen compound lobaric acid

Lichens synthesize and accumulate photoprotective compounds against possible damage induced by UV radiation in the photobiont. A biological model has been recently formulated that allows the use of lichens to evaluate changes at different UV radiation levels. The thermodynamics, photophysical and photochemical properties of lobaric acid were studied in acetonitrile, ethanol and Brij 35(3%) micelles at different pH values. Also the sun protector factor (SPF) was determined by in vitro methods. Lobaric acid was extracted from Stereoculon alpinum Laur. and characterized by means of standard procedures. Solutions were irradiated in oxygen and under nitrogen conditions with a UV medium pressure lamp. Lobaric acid absorbs at 287, 303 nm, and no fluorescence emission was observed. The maximum value of the molar extinction coefficient (5479.6 M(-1) cm(-1)) was obtained in Brij 35 at pH 12. Solubility is pH dependant and is highest in Brij 35 at pH 12 (4.45 x 10(-4) M). Photoconsumption quantum yields ranged between 10(-4) and 10(-5) in aerobic and anaerobic experimental conditions. Lobaric acid SPF was very low (0.5) compared with homosalate (4.0), (reference solar filter). Two pKa values, 5.05 (carboxylic acid group deprotonation) and 9.75 (phenolic OH deprotonation), were determined.     

Uniformization of Riemann surfaces revisited

Annals of Global Analysis and Geometry - We give an elementary and self-contained proof of the uniformization theorem for noncompact simply connected Riemann surfaces.