Preparation of Starch Succinate WITH INTERMEDIATE DS BY AQUEOUS SLURRY REACTION

Modification of starch by chemical derivatization has been widely studied since early 1950s. The formation of starch ester such as acetate and propionate imparts starch water resistance. In contrast, the introduction of carboxylates onto starch increases the hydrophilicity of starch. One example is carboxymethyl starch (CMC), which has been widely used in several industry areas. Succinic anhydride reacts with starch to form starch succinates. Since starch succinates are polyanions, they off…     

Angioarchitecture of tumors induced by two different cloned cell lines established from a transplantable rat malignant fibrous histiocytoma.

Angiogenesis, a biologic process whereby endothelial cells divide and migrate to form new blood vessels, is a key step in tumor growth, invasion, and metastasis. In the present study, we investigated the differences in angioarchitecture between two different tumors induced by cloned cell lines (MT-8 and MT-9), derived from a transplantable rat malignant fibrous histiocytoma, by scanning electron microscopy of vascular corrosion casts. During a 3-week observation period after implantation, the growth of MT-8 tumors appeared to be faster than that of MT-9 tumors. Histologically, MT-8 tumors were of the uniformly undifferentiated sarcoma type arranged in characteristic organoid structures, and MT-9 tumors showed a storiform growth pattern. In MT-8 tumors, neovascularization occurred by sprouting at postimplantation (PI) week 1, and the newly formed capillaries gradually became more tortuous. In MT-9 tumors, at PI week 1, the corrosion casts of newly formed capillaries mainly showed a wavy course but no finger-like outgrowths of capillaries were seen. At PI weeks 2 and 3, the sprouting was seen specifically in MT-9 tumors, forming basket-like structures and glomeruloid structures of capillaries. These results indicate that angiogenesis or angioarchitecture of MT-8 tumors is different from that of MT-9 tumors, depending on the differences in their tumor histology and by the features like absence or presence of basket-like structures and glomeruloid structures of capillaries.     

Biologically-inspired stochastic vector matching for noise-robust information processing

“End of Moore’s Law” has recently become a topic. Keeping the signal-to-noise ratio (SNR) at the same level in the future will surely increase the energy density of smaller-sized transistors. Lowering the operating voltage will prevent this, but the SNR would inevitably degrade. Meanwhile, biological systems such as cells and brains possess robustness against noise in their information processing in spite of the strong influence of stochastic thermal noise. Inspired by the information processing of organisms, we propose a stochastic computing model to acquire information from noisy signals. Our model is based on vector matching, in which the similarities between the input vector carrying external noisy signals and the reference vectors prepared in advance as memorized templates are evaluated in a stochastic manner. This model exhibited robustness against the noise strength and its performance was improved by addition of noise with an appropriate strength, which is similar to a phenomenon observed in stochastic resonance. Because the stochastic vector matching we propose here has robustness against noise, it is a candidate for noisy information processing that is driven by stochastically-operating devices with low energy consumption in future. Moreover, the stochastic vector matching may be applied to memory-based information processing like that of the brain.     

A non‐linear k–ε model with realizability for prediction of flows around bluff bodies

The incompressible flow around bluff bodies (a square cylinder and a cube) is investigated numerically using turbulence models. A non‐linear k–ε model, which can take into account the anisotropy of turbulence with less CPU time and computer memory then RSM or LES, is adopted as a turbulence model. In tuning of the model coefficients of the non‐linear terms are adjusted through the examination of previous experimental studies in simple shear flows. For the tuning of the coefficient in the eddy viscosity (=C_μ), the realizability constraints are derived in three types of basic 2D flow patterns, namely, a simple shear flow, flow around a saddle and a focal point. C_μ is then determined as a function of the strain and rotation parameters to satisfy the realizability. The turbulence model is first applied to a 2D flow around a square cylinder and the model performance for unsteady flows is examined focussing on the period and the amplitude of the flow oscillation induced by Karman vortex shedding. The applicability of the model to 3D flows is examined through the computation of the flow around a surface‐mounted cubic obstacle. The numerical results show that the present model performs satisfactorily to reproduce complex turbulent flows around bluff bodies. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis and thermal properties of disiloxane-arylene polymers by dehydrocoupling polymerization of bis(dimethylsilyl)arylene with water

Disiloxane-arylene polymers having phenylene, biphenylene, and fluorenylene groups as arylene units were synthesized by dehydrocoupling polymerization of corresponding bis(silane) derivatives with water. The reactivity of Si-H was not affected by the structure of aromatic groups in the reaction. The polymers containing biphenylene and fluorenylene units are amorphous and show higher glass transition temperatures than the polymer from 1,4-bis(dimethylsilyl)benzene.     

Thermoelectric properties of the AA′3B4O12-type ordered perovskite oxides

The perovskite transition-metal oxide ABO₃ has been extensively studied in various areas in solids. While the B ion determines the electronic properties, e.g., ferroelectricity, ferromagnetism, and superconductivity, the A site has been regarded as a “back-seat player” to change the doping level or the bandwidth. However, in the ordered perovskite oxide AA′₃B₄O₁₂, the A site order is closely related to the peculiar electronic states. In CaMn₃Mn₄O₁₂, the unusually small bandwidth justifies to extrapolate the transport data to the high-temperature limit, and in CaCu₃Ru₄O₁₂, a novel heavy-fermion state is realized through the Cu–O–Ru interaction.     

A Practical See-Through Head Mounted Display Using a Holographic Optical Element

This paper describes a practical method for design and fabrication of holographic optical elements (HOEs) as off-axis imaging optics. The authors have designed and fabricated a compact glass-like and see-through display using HOE and a total internal reflection prism. Observers can see through the display because wavelength selectivity of the HOE provides high transparency. Wave front of the HOE is designed by commercial software, though the actual fabrication method is not provided. The authors propose a practical method to fabricate HOEs, which can be applied to a wide range of imaging optics.This paper was originally presented at the 2nd International Conference on Optical Design and Fabrication, ODF2000 which was held on November 15–17, 2000 at the International Conference Center, Tokyo, Waseda University, Japan.     

Comprehensive synthesis of ER related high-mannose-type sugar chains by convergent strategy

Systematic synthesis of high-mannose-type sugar chains of asparagine-linked glycoproteins is described. To construct the target sugar chains, we employed the convergent route, using three oligosaccharide components, the common hexasaccharide, branched tri-, tetra- and pentasaccharides, and mono-, di-, and triglucosyl fragments. Construction of the β-mannoside linkage was performed using p-methoxybenzyl-assisted intramolecular aglycon delivery. The hexasaccharide fragment was coupled with the branched mannooligosaccharide donors such as M5, M4B, M4C, and M3 to give undecasaccharide (M9), decasaccharide (M8B and M8C), and nonasaccharide (M7), respectively. Incorporation of mono-, di-, and triglucosyl fragments toward them gave tetradecasaccharide (G3M9), tridecasaccharide (G2M9), dodecasaccharide (G1M9), undecasaccharide (G1M8B and G1M8C), and decasaccharide (G1M7), respectively.     

A novel approach for LC-MS/MS-based chiral metabolomics fingerprinting and chiral metabolomics extraction using a pair of enantiomers of chiral derivatization reagents

Chiral metabolites are found in a wide variety of living organisms and some of them are understood to be physiologically active compounds and biomarkers. However, the overall analysis of chiral metabolomics is quite difficult due to the high number of metabolites, the significant diversity in their physicochemical properties, and concentration range from metabolite-to-metabolite. To solve this difficulty, we developed a novel approach for chiral metabolomics fingerprinting and chiral metabolomics extraction, which is based on the labeling of a pair of enantiomers of chiral derivatization reagents (i.e., DMT-(S,R)-Pro-OSu and DMT-3(S,R)-Apy) and precursor ion scan chromatography of the derivatives. The multivariate statistics is also required for this strategy. The proposed procedures were evaluated by the detection of a diagnostic marker (i.e., d-lactic acid) using the saliva of diabetic patients. This method was used for the determination of biomarker candidates of chiral amines and carboxyls in Alzheimer's disease (AD) brain homogenates. As the results, l-phenylalanine (L-Phe) and l-lactic acid (L-LA) were identified as the decreased and increased biomarker candidates in the AD brain, respectively. Therefore, the proposed approach seems to be helpful for the determination of non-target chiral metabolomics possessing amines and carboxyls.     

A C3‐Symmetric Macrocycle‐Based,Hydrogen‐Bonded,Multiporous Hexagonal Network as a Motif of Porous Molecular Crystals

A C₃‐symmetric π‐conjugated macrocycle combined with an appropriate hydrogen bonding module (phenylene triangle) allowed the construction of crystalline supramolecular frameworks with a cavity volume of up to 58 %. The frameworks were obtained through non‐interpenetrated stacking of a hexagonal sheet possessing three kinds of pores with different sizes and shapes. The activated porous material absorbed CO₂ up to 96 cm³ g⁻¹ at 195 K under 1 atm.