The Synthesis of Third—order Optical Nonlinear Organic Polyheterocyclic Materials

Synthesis of the third-order nonlinear materials:bis (1,4-dihydroxynaphthalene) tetrathiafulvalene and bis (1,4-dialkoxylnaphthalene) tetrathiafulvalene has been achieved in four steps, starting from 2,3-dichloro-1,4-naphthaquinone. The materials exhibit larger third-order nonlinear optical susceptibilities χ.     

Pressure pinched injection of nanolitre volumes in planar micro-analytical devices

A new method for injecting and driving fluids by means of a multi-port injection valve and syringe pumps in a micro-channel network is described. A structure composed of two micro-channels arranged as a cross is connected with capillary tubes to an external multi-port injection valve. The fluid flows are driven by pressure and the multi-port valve controls the direction of the flow within the different sections of the structure. The first position of the multi-port valve allows the preparation of the loading of the sample, which is pinched in the cross section of the two micro-channels. The second position allows the precise injection of nL volumes. No dead volume exists between injection and separation modes. The system can be used to prepare a sample plug by pressure in order to perform chromatography with a broad range of buffered or non-buffered solutions. Thanks to the insensitivity to the ionic strength of the sample, this injection method is useful for the injection of complex biological samples in microchip analysis. In order to demonstrate the feasibility of the method, different solutions of ionic or fluorescent molecules were injected and detected in a photoablated planar polymer device.     

Four New Podocarpane‐Type Trinorditerpenes from Aleurites moluccana

Four new podocarpane‐type trinorditerpenenes, (5β,10α)‐12,13‐dihydroxypodocarpa‐8,11,13‐trien‐3‐one ( 1 ), (5β,10α)‐12‐hydroxy‐13‐methoxypodocarpa‐8,11,13‐trien‐3‐one ( 2 ), (5β,10α)‐13‐hydroxy‐12‐methoxypodocarpa‐8,11,13‐trien‐3‐one ( 3 ), and (3α,5β,10α)‐13‐methoxypodocarpa‐8,11,13‐triene‐3,12‐diol ( 4 ), together with four known diterpenes, 12‐hydroxy‐13‐methylpodocarpa‐8,11,13‐trien‐3‐one ( 5 ), spruceanol ( 6 ), ent‐3α‐hydroxypimara‐8(14),15‐dien‐12‐one ( 7 ), and ent‐3β,14α‐hydroxypimara‐7,9(11),15‐triene‐12‐one ( 8 ), were isolated from the twigs and leaves of Aleurites moluccana. Their structures were elucidated by means of comprehensive spectroscopic analyses, including NMR and MS. Except 8 , all compounds were evaluated for their cytotoxicity; compound 4 exhibited moderate inhibitory activity against Raji cells with an IC₅₀ value of 4.24 μg/ml.     

Enhanced and selective adsorption of mercury ions on chitosan beads grafted with polyacrylamide via surface-initiated atom transfer radical polymerization

Enhanced and selective removal of mercury ions was achieved with chitosan beads grafted with polyacrylamide (chitosan-g-polyacrylamide) via surface-initiated atom transfer radical polymerization (ATRP). The chitosan-g-polyacrylamide beads were found to have significantly greater adsorption capacities and faster adsorption kinetics for mercury ions than the chitosan beads. At pH 4 and with initial mercury concentrations of 10-200 mg/L, the chitosan-g-polyacrylamide beads can achieve a maximum adsorption capacity of up to 322.6 mg/g (in comparison with 181.8 mg/g for the chitosan beads) and displayed a short adsorption equilibrium time of less than 60 min (compared to more than 15 h for the chitosan beads). Coadsorption experiments with both mercury and lead ions showed that the chitosan-g-polyacrylamide beads had excellent selectivity in the adsorption of mercury ions over lead ions at pH < 6, in contrast to the chitosan beads, which did not show clear selectivity for either of the two metal species. Mechanism study suggested that the enhanced mercury adsorption was due to the many amide groups grafted onto the surfaces of the beads, and the selectivity in mercury adsorption can be attributed to the ability of mercury ions to form covalent bonds with the amide. It was found that adsorbed mercury ions on the chitosan-g-polyacrylamide beads can be effectively desorbed in a perchloric acid solution, and the regenerated beads can be reused almost without any loss of adsorption capacity.     

手性钛锆化合物在不对称合成中的应用

本文综述了近年来手性钛锆化合物在不对称合成中的应用, 特别是手性柄型金属钛和锆化合物在不对称合成中的应用。对这类催化剂的特点和前景作了简要介绍。     

Determination of levodopa by capillary electrophoresis with chemiluminescence detection

A rapid and simple method using capillary electrophoresis (CE) with chemiluminescence (CL) detection was developed for the determination of levodopa. This method was based on enhance effect of levodopa on the CL reaction between luminol and potassium hexacyanoferrate(III) (K₃[Fe(CN)₆]) in alkaline aqueous solution. CL detection employed a lab-built reaction flow cell and a photon counter. The optimized conditions for the CL detection were 1.0 × 10⁻⁵ M luminol added to the CE running buffer and 5.0 × 10⁻⁵ M K₃[Fe(CN)₆] in 0.6 M NaOH solution introduced postcolumn. Under the optimal conditions, a linear range from 5.0 × 10⁻⁸ to 2.5 × 10⁻⁶ M (r = 9991), and a detection limit of 2.0 × 10⁻⁸ M (signal/noise = 3) for levodopa were achieved. The precision (R.S.D.) on peak area (at 5.0 × 10⁻⁷ M of levodopa, n = 11) was 4.1%. The applicability of the method for the analysis of pharmaceutical and human plasma samples was examined.     

A MORPHOLOGICAL STUDY OF POLY（DIVINYLBENZENE-co-ACRYLIC ACID） IN CROSSLINKING PRECIPITATION POLYMERIZATION

Divinylbenzene-80 （DVB-80） and polar monomer acrylic acid （AA） having hydrogen bonding at a total monomer loading of 5 vol% were precipitated-copolymerized in a variety of organic solvents with 2,2＇-azobis（isobutyronitrile） （AIBN） as initiator. The experiments were investigated from a two-dimensional matrix, i.e., the actual crosslinking degree of DVB varying from 0 to 80% and the solvent composition varying from 0 to 100% of toluene mixture with acetonitrile, when the mixture of acetonitrile and toluene was used as the reaction solvent. Under various reaction conditions, six distinct morphologies including soluble polymers, swellable microgels, coagulum, irregular microparticles, and nano-/micrometer microspheres were formed and the structures of these polymer architectures were described. A morphological map was utilized to discuss the effects of both crosslinking degree of DVB and composition of solvent on the transitions between morphology domains. The results demonstrated that the microspheres are formed by an internal contraction due to the marginal solvency of the continuous phase and the crosslinking of the polymer network through the covalent bonding from DVB as well as the interchain hydrogen-bonding between the carboxylic acid units.     

动态单滴法研究乳状液液膜的稳定性

乳状液液膜作为化学分离的一种手段,自七十年代发现以来已有了许多进展,但是如何将其工业化还有许多课题有待于进一步研究.目前,除了乳状液液膜的水静态渗透性质以外,对乳状液液膜的稳定性和溶胀性质的研究主要采用搅拌法.虽然得到较好的规律性,但是搅拌法具有乳状液滴粒径分布广的弱点,对于不同的搅拌方式及条件,乳状液液膜的有效面积不同,对液膜作用的机械强度不同,因此结果会有很大差别.我们自行设计的动态单滴法实验装置,可定量地研究乳状液液膜的溶胀、稳定性及水渗透性质.     

Specific oxidation of C-14 oxygenated 4(20),11-taxadienes by microbial transformation

Three C-14 oxygenated taxanes, 2α,5α,10β,14β-tetraacetoxytaxa-4(20),11-diene (1), 2α,5α,10β-triacetoxy-14β-(2-methylbutyryloxy)taxa-4(20),11-diene (2), and yunanaxane (3), major products of callus cultures of Taxus spp., were regio- and stereoselectively hydroxylated at the 7β position by a fungus, Absidia coerulea IFO 4011. Intriguingly, when 1 was co-administered with β-cyclodextrin and incubated with the fungus cell cultures, three other compounds 5α,9α,10β,13α-tetraacetoxytaxa-4(20),11-dien-14β-ol (7), 5α,9α,10β,13α-tetraacetoxytaxa-4(20),11-dien-1β-ol (8) and 5α,9α,10β,13α-tetraacetoxy-11(15→1) abeotaxa-4(20),11-dien-15-ol (9) were obtained.     

1-(2-pyridylazo)-2-naphthol (PAN) as extractant in solid-liquid extraction of some trivalent rare earth elements

In the present paper, solid-liquid extraction behaviour of RE(III) (RE La, Ce, Pr, Nd, Sm, Gd, Dy and Yb) by the use of 1-(2-pyridylazo)-2-naphthol (PAN, HL) as an extractant in paraffin (m.p. 48 approximately 50 degrees) has been investigated at 80 +/- 0.07 degrees. The effect of equilibrium time, pH of aqueous phase, concentration of extractant in paraffin and solid diluent as well as buffer solution used on the extraction efficiency of RE(III) have been discussed. The extraction reaction is RE(3+) + 2HL(o) + Cl(-) <==> REL(2)Cl(o) + 2H(+).