Electrochemical characterization of the redox couple of Fe(III)/Fe(II) mediated by grafted polymer electrode

A new grafted polymer electrode (GPE) (polystyrene as polymer) was grafted with acrylonitrile as a monomer using gamma irradiation to produce a new grafted polymer. The redox process of K₃Fe(CN)₆ during cyclic voltammetry was studied by the new GPE. The ratio of Ipc/Ipa >1 of GPE to GCE Ipc/Ipa = 1.7, indicating that this electrode is a reversible electrode and can be used in conductivity studies by voltammetric analysis. The physical properties of the new electrode GP have good hardness, insolubility, and stability at different high temperatures and at different pH. Also, the sensitivity under conditions of cyclic voltammetry is significantly dependent on pH, electrolyte, and scan rate. At different scan rates, two oxidation peaks and two reduction peaks of Fe(III) were observed in a reversible process: Fe(III) Fe(II), and Fe(II) Fe(0). Interestingly, the redox reaction of Fe(III) solution using GPE remained constant even after 15 cycles. It is therefore evident that the GPE possesses some degree of stability. The potential use of the grafted polymer as a useful electrode material is therefore clearly evident.     

Stretchable Perovskite Solar Cells with Recoverable Performance

Perovskite solar cells (PSCs) are a promising photovoltaic technology for stretchable applications because of their flexible, light‐weight, and low‐cost characteristics. However, the fragility of crystals and poor crystallinity of perovskite on stretchable substrates results in performance loss. In fact, grain boundary defects are the “Achilles’ heel” of optoelectronic and mechanical stability. We incorporate a self‐healing polyurethane (s‐PU) with dynamic oxime–carbamate bonds as a scaffold into the perovskite films, which simultaneously enhances crystallinity and passivates the grain boundary of the perovskite films. The stretchable PSCs with s‐PU deliver a stabilized efficiency of 19.15 % with negligible hysteresis, which is comparable to the performance on rigid substrates. The PSCs can maintain over 90 % of their initial efficiency after 3000 hours in air because of their self‐encapsulating structure. Importantly, the self‐healing function of the s‐PU scaffold was verified in situ. The s‐PU can release mechanical stress and repair cracks at the grain boundary on multiple levels. The devices recover 88 % of their original efficiency after 1000 cycles at 20 % stretch. We believe that this ingenious growth strategy for crystalline semiconductors will facilitate development of flexible and stretchable electronics.     

Enantioselective three-component Ugi reaction catalyzed by chiral phosphoric acid

A catalytic enantioselective three-component Ugi reaction was developed. SPINOL-derived phosphoric acid with bulky 2,4,6-tricyclohexylphenyl groups at the 6,6′ positions was found to be the best catalyst to afford α-amino amide derivatives in good to excellent yields(62% to 99%) and enantiocontrol(81% to 99% enantiomeric excess). This asymmetric reaction was applicable well to an array of aliphatic aldehydes. The gram-scale synthesis, modification of dapsone, and enantioselective synthesis of(R)-Lacosamide underline the general utility of this methodology. Influence of dihedral angles and substituents of the chiral phosphoric acids on the enantioselectivity was also discussed in this article.     

Aromatic polyamides containing keto-benzocyclobutene pendants

A series of novel benzocyclobutene (BCB)-pendanted polyamides (inherent viscosities: 0.20–0.69 dL/g) was synthesized from 3,5-diaminophenyl-4-benzocyclobutenyl ketone, and terephthaloyl, isophthaloyl, 4,4′-oxydibenzoyl chlorides, as well as 4,4′-(o-phenylenedioxy)dibenzoyl chloride. The DSC studies demonstrated that the BCB crosslinking exothermic transition occurred at nearly the same temperature (max. ∼︁ 275°C) for all the four polyamides, and they were thermally stable up to 380°C in helium, where the weight loss started to occur. TGA and DSC studies in air indicated that the polymers, in contrast to the model compound, showed evidence of oxidation just prior to or occurring simultaneously with the BCB crosslinking reaction. This could be attributed to the oxidation of the reactive diene generated from the ring-opening of the BCB competing with the process of two BCB pendant units approaching each other for crosslinking reaction. Preliminary examination of the BCB-pendanted polyamide regenerated from a methanesulfonic acid solution indicates that the BCB ring is quite stable (DSC evidence) in the strong acid medium. © 1996 John Wiley & Sons, Inc.     

深空光通信中的图像信标捕获技术

为实现深空光通信链路建立过程中精确的对准,提出了一种深空光通信系统扩展信标的捕获方案。该方案以可视地球图像作为信标,在航天器上存储一幅信标图像作为参考图像,采用天线扫描的方式在各点对所瞄准的区域成像,利用像素扫描的方式,使参考图像和实际探测图像进行相关,在天线扫描完成以后,找出相关性最大的位置,即可认为在该点捕获到地球图像。在计算两图像相关系数的过程中,由于傅里叶梅林变换幅度谱具有伸缩及旋转不变性,因此利用傅里叶梅林变换即可消除两图像相关系数因为旋转和伸缩的影响。利用蒙特卡罗方法随机产生1000个视场,仿真结果表明,3σ内正确捕获到信标图像的概率为99.6%,表明这是一种可行的方法。     

Flowfield of a helicopter submerged inlet with power output shaft

The submerged inlet is an attractive configuration for advanced helicopters due to its high stealth performance and low external drag.In this paper,a submerged ...     

Effects of MN4-Type Coordination Structure in Metallophthalocyanine for Bio-Inspired Oxidative Desulfurization Performance

Oxidative desulfurization (ODS) is the promising new method for super deep desulfurization of fuel oil. The oxidative desulfurization performance of the metal-N₄-chelates metallophthalocyanines (MPcs) is related to the chemical properties of conjugate structures and the central metal ions. Herein, a biomimetic catalytic system composed of metallophthalocyanines (MPcR₄, M = Mn(II), Fe(II), Co(II), Ni(II), Cu(II), Zn(II); R = -H, -COOH, -NO₂, -NH₂) and molecular O₂ was performed to study the influence of MN₄-type coordination structure in metallophthalocyanines for the degradation of dibenzothiophene (DBT) in model oil containing n-octane. The results reveal that the conjugate structures and the center metal ions of metallophthalocyanines played key roles in oxidative desulfurization performance. The inductive effect of different R substituents strongly affected the electron cloud distribution of the conjugate structures and the catalytic performance. Moreover, the catalytic activity of MPcs, which is related to the d electronic configuration and ligand-field effects, does not sequentially increase with the increase in the d electron number of central metal ions.     

Terahertz wave emission from water lines

To make further understanding of terahertz(THz)wave generation from liquid water,we study THz wave emission from water lines of different diameters.The water line with a smaller diameter generates a stronger THz electric field for the diameters from 0.2 mm to 0.5 mm.The THz electric field strength and polarity change with the relative position between the incident laser and water line.Moreover,the THz energy has an optimal radiation angle of about 60°.A two-dimensional dipole array model is introduced to illustrate the phenomenon.Our observations contribute to optimizing the scheme of the liquid THz source.     

Overview of finite elements simulation of temperature profile to estimate properties of materials 3D-printed by laser powder-bed fusion

Laser powder bed fusion(LPBF),like many other additive manufacturing techniques,offers flexibility in design expected to become a disruption to the manufacturing industry.The current cost of LPBF process does not favor a try-anderror way of research,which makes modelling and simulation a field of superior importance in that area of engineering.In this work,various methods used to overcome challenges in modeling at different levels of approximation of LPBF process are reviewed.Recent efforts made towards a reliable and computationally effective model to simulate LPBF process using finite element(FE)codes are presented.A combination of ray-tracing technique,the solution of the radiation transfer equation and absorption measurements has been used to establish an analytical equation,which gives a more accurate approximation of laser energy deposition in powder-substrate configuration.When this new analytical energy deposition model is used in in FE simulation,with other physics carefully set,it enables us to get reliable cooling curves and melt track morphology that agree well with experimental observations.The use of more computationally effective approximation,without explicit topological changes,allows to simulate wider geometries and longer scanning time leading to many applications in real engineering world.Different applications are herein presented including:prediction of printing quality through the simulated overlapping of consecutive melt tracks,simulation of LPBF of a mixture of materials and estimation of martensite inclusion in printed steel.