Polystyrene prepared by reactive extrusion: kinetics and effect of processing parameters

The conversion and residence time were investigated during the bulk polymerization of styrene in a twin screw extruder. It was found that polymerization mainly occurred in the zone between 400 and 1000 mm along the screw axis in the extruder, corresponding to the residence time of the reactants ranging from 1 to 4 min in the extruder. Furthermore, the processing conditions (feed rate, screw rotation rate) and average molecular weight of the polymer have a great effect on the residence time. Based on dimensionless analysis, a model of the residence time has been built‐up, which has been confirmed by the results of realistic measurements. A kinetic model of the polymerization has also been established under the assumption that the screw extruder can be regarded as an ideal plug flow reactor. Copyright © 2004 John Wiley & Sons, Ltd.     

Determination of pentachlorophenol by negative ion chemical ionization with membrane introduction mass spectrometry

Pentachlorophenol (PCP) was used as a model compound to explore the potential of desorption chemical ionization (DCI) in the determination of polychlorinated pesticides using membrane introduction mass spectrometry (MIMS). A direct insertion membrane probe was modified so that a chemical ionization plasma could be established at the membrane surface. Using selected ion monitoring (SIM) in a tandem triple quadrupole mass spectrometer with isobutane chemical ionization (CI), the PCP detection limit under positive chemical ionization is 20 ppb whereas negative CI gives detection limits in the low ppb range. This performance is achieved without any pre-treatment or derivatization of the sample. Negative ion CI gives a signal that is linear over a concentration range of 2-1000 ppb. Comparison of data obtained with low ppb samples of 2,4,6-trichlorophenol, 2,3,4,6-tetrachlorophenol and pentachlorophenol suggests that the sensitivity of this analytical procedure increases with increase in the number of electronegative substituents in the molecule.     

Perfluorinated anion-exchange polymer mercury film electrode for anodic stripping voltammetric determination of zinc(II): effect of model organic compounds

The determination of zinc ion (1-60 ng ml⁻¹) by anodic square-wave stripping voltammetry on an anion-exchange perfluorinated polymer Tosflex mercury film electrodes (TMFE) was evaluated. The detection limit was 0.1 ng ml⁻¹ Zn(II). The effect of various organic compounds (gelatin, albumin, starch, camphor, humic acid, Triton X-100, sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB)) is explored. The results indicate that due to the size-exclusion and ion-exchange properties of Tosflex film, the TMFE is considerably more resistant to organic interference than the bare mercury film electrode.     

双核银络合物[Ag_2(dppm)_2(Py)_2(μ-Cl)]ClO_4的合成与结构

二-(二苯基膦)甲烷(dppm)是一种易与金属形成多核络合物的有机膦配体。我们用dppm作为配体合成了一系列银的多核络合物,并对其结构进行了研究。本文报导了其中一个双核化合物[Ag_2(dppm)_2(Py)_2(μ-Cl)]ClO_4的合成及晶体结构、分子结构的测定。     

CO在Pd／ZrO2—Al2O3催化剂上表面反应性能的研究

用流动反应法和ＴＰＳＲＭＳ等技术研究了ＣＯ在Ｐｄ／γＡｌ２Ｏ３和含有ＺｒＯ２的催化剂上的吸脱附行为、表面反应及催化氧化活性，同时用ＸＲＤ技术测定了催化剂的物相结构。结果表明，在Ｐｄ／γＡｌ２Ｏ３催化剂中用浸渍法添加ＺｒＯ２或掺杂超细ＺｒＯ２后，催化剂的氧化活性均有明显提高；ＣＯＴＰＳＲ的实验结果表明，ＣＯ在氧化态Ｐｄ催化剂上程序升温脱附过程中主要与表面氧发生氧化反应，而在还原态Ｐｄ催化剂上发生歧化反应，并发现ＣＯ２的脱附量及脱附峰温次序与对ＣＯ的氧化活性有一致的对应关系。     

过渡金属大环配合物的研究Ⅲ 4-硝基-苯并15冠-5与钴(Ⅱ)、铜(Ⅱ)和银(Ⅰ)配合物的合成及性质

有关冠醚配体与碱金属,碱土金属和稀土离子形成配合物的特性研究,国内外均有报导,但冠醚与d-过渡金属离子配合物的研究工作,则开展较晚,文献报导亦甚少。本文为探讨4-硝基-苯并15冠-5(No_2·B15C15)与过渡金属离子的配位能力,合成了Co(Ⅱ),Cu(Ⅱ),和Ag(Ⅰ)与4-硝基-苯并15冠-5配合物。并进行了元素分析,X-射线衍射,红外光谱,摩尔电导,激光拉曼光谱及差热-热失重分析的研究。     

羧酸铜催化反应的研究——Ⅰ.羧酸铜催化醛肟转变为睛

本文报道了在多种羧酸铜催化下,醛肟在含有氰基的溶剂中(如CH_3CN、CH_3OCH_2CH_2CN等),均可脱水转变成相应的腈。反应条件温和,产率较高。具有不同空间和电性效应取代基的羧酸铜对反应的产率影响不大。实验中还发现溶剂乙腈参与了上述反应。     

双马来酰亚胺增韧研究Ⅱ.链扩展双马来酰亚胺及其树脂的合成及表征

合成了一系列结构不同和链长短不一的双马来酰亚胺，并对其结构和性能作了表征，同时研究了它们的固化反应和固化产物的性能。用双马来酰亚胺和二烯丙基化合物反应制造了增韧树脂，研究了该树脂的固化和热稳定性。     

铁(III)卟啉催化β-胡萝卜素分解动力学研究

使用BeckmannDU-8B紫外可见分光光度计研究了以氯合四－间三甲苯基卟啉铁（Ⅲ）（FeTMPCl）为催化剂，间氯过氧化苯甲酸（mCPBA）为氧化剂，咪唑（I_m）、2－甲基咪唑（MeI_m）、2－乙基－4－甲基咪唑（EMI_m）为轴向配体，催化β-胡萝卜素（β－cte）氧化分解为维生素A的动力学规律，提出了反应机理，研究了温度、催化剂浓度、氧化剂浓度及轴向配体对反应速率的影响，应用Gauss－Newton－Marquardt方法求得各基元反应的有关动力学参数．     

ZrO2对Mn—O／γ—Al2O3催化剂中表面氧性能的影响

用ＴＰＤ－ＭＳ和ＴＰＲ技术研究了Ｍｎ－Ｏ／γ－Ａｌ２Ｏ３和Ｍｎ－Ｏ／ＺｒＯ＋γ－Ａｌ２Ｏ３催化剂中表面氧的脱附、还原性能和再生氧化恢复性能，并用ＸＲＤ对催化剂的固相结构进行了表征。结果表明，Ｍｎ－Ｏ／γ－Ａｌ２Ｏ３或Ｍｎ－Ｏ／ＺｒＯ２＋γ－Ａｌ２Ｏ３催化剂上存在ＭｎＯ２、Ｍｎ２Ｏ３和少量Ｍｎ３Ｏ４物种。ＺｒＯ２的存在不影响Ｍｎ－Ｏ／γ－Ａｌ２Ｏ３的ＴＰＲ的ＴＰＤ的特征峰，但使ＭｎＯ２的量明显增加，