变组分AlGaAs/GaAs透射式光电阴极分辨力特性分析

建立了变组分AlGaAs/GaAs光电阴极二维载流子输运连续性方程.在一定的边界条件下,利用数值计算方法对此方程进行求解,得到了变组分AlGaAs/GaAs光电阴极调制传递函数(MTF)理论计算模型.利用该模型计算了透射式变组分和均匀组分阴极的理论MTF,分析了分辨力与Al组分变化范围、入射光子波长、AlGaAs和GaAs层厚度的关系.计算结果表明,变组分阴极与均匀组分阴极相比,阴极分辨力显著提高.当空间频率f在100—500 lp·mm-1区间时,分辨力的提高最为明显,如当f=200 lp·mm-1时,一般可提高150%—260%.变组分阴极分辨力的提高是内建电场作用的结果,但内建电场太大时,也会由于Al组分含量过高而影响阴极的长波响应.     

透射式负电子亲和势GaN光电阴极的光谱响应研究

利用金属有机化合物化学气相淀积(MOCVD)生长了发射层厚度为150 nm、掺杂浓度为1.6×10¹⁷ cm^-3的透射式GaN光电阴极,并在超高真空激活系统中对其进行了激活.通过多信息量测试系统进行了测试,发现透射式负电子亲和势(NEA)GaN光电阴极的量子效率曲线成一个"门"的形状,在255—355 nm波段有较大且平坦的响应,在290 nm处取得最大值为13%,由于AlN缓冲层对短波段光的吸收系数较大,在小于255 nm的波段量子效率出现了下降,当波长大于3 关键词： 透射式 NEA GaN光电阴极 量子效率     

Design of unobscured reflective zoom system with three mirrors

A method for the design of an unobscured reflective zoom system with three mirrors is described. This method applies the vector aberration theory, which helps designers analyze third-order aberrations for optical systems with decentered and tilted surfaces. As the vector aberration theory presents the variation of third-order aberrations in asymmetric systems through analytic expressions, real ray tracing is unnecessary. Hence, the design with vector aberration theory is faster, and the analytic expressions are more comprehensive and intuitive. To demonstrate the practicability of the method, a design example is given, which shows that the presented method can guide designers achieve a good unobscured reflective zoom system with three mirrors.     

BaTi2Bi2O的电子结构与磁性

采用第一性原理方法,对BaTi₂Bi₂O的电子结构和磁性进行计算.非磁性态的计算结果显示:费米能级处的态密度主要来自d_z²,d_x²-y²和d_xy三个轨道,同时费米面也主要有三部分组成,并且将其沿着矢量q₁=(π/a,0,0)和q₂=(0,π/a,0)平移时,第三部分费米面(沿着X-R连线)与第一部分费米面(M-A连线)嵌套明显,计算得出磁化系数χ₀(q)在X点出现峰值,与峰值出现在M点的FeAs基超导体不同.上述磁化率峰值可以诱导产生自旋密度波,使得BaTi₂Bi₂O材料的磁性基态是bi-collinear antiferromagnetism(AF3)与blocked checkerboard antiferromagnetism(AF4)的二度简并态.随着空穴掺杂,χ₀(q)的峰值降低,而电子掺杂则导致峰值变大.当自旋涨落被完全压制时,超导出现,这可以解释为什么超导只出现在空穴掺杂型化合物而非电子掺杂型.     

用于近场集成光学头微透镜器件的灰度掩模技术

讨论了制作适用于近场集成光学头中的凸形、凹形微透镜和折衍射复合微透镜的灰度掩模技术。定性地给出了与几种典型的凸形、凹形微透镜和折衍射复合微透镜对应的灰度掩模版的设计实例 ,以及将它应用于光刻操作的情况 ,为采用灰度掩模技术制作适用于近场集成光学头中的微透镜器件奠定了基础。灰度掩模技术在微透镜器件的制作方面具有重要的应用前景 ,有助于简化制备工艺 ,降低制作成本 ,优化微透镜阵列的结构参数。     

蒸镀法制备全有机并五苯薄膜场效应晶体管

以全蒸镀方法在真空室内一次性制备了正装结构的全有机并五苯薄膜场效应晶体管。正装结构全蒸镀法有利于简化工艺制备程序,缩小器件尺寸,提高集成度。制备的绝缘层厚度仅为50nm的全有机薄膜场效应晶体管,器件的工作电压降至10V,相同电压下饱和输出电流有了明显提高。筛选适当的有机绝缘材料,改善全有机薄膜场效应晶体管有源层/绝缘层的界面性能,使阈值电压几乎降至0V,场效应迁移率提高了3倍多,输出饱和电流也有了明显的提高。     

The pressure-induced phase transition of the solid β–HMX

The structural, vibrational and thermodynamic properties of β-octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (β–HMX) crystal have been studied using the isothermal-isobaric molecular dynamics (NPT-MD) simulations. The variations of cell volume, lattice constants and molecular geometry of solid β–HMX are presented and discussed at different pressure and temperature. It was found that the N–N bond is significantly lengthened with increasing temperature, which suggests that it is relevant to the initial decomposition. An abrupt change at 27 Gpa for the volume and internal geometrical parameters was observed. This is in good accord with the experimental observation that there is a phase transition at 27 GPa, which is clearly due to conformational change, not chemical reaction. The vibrational frequencies at ambient conditions agree well with experimental results, and the pressure/temperature-induced frequency shifts of these modes are discussed. Frequency discontinuity was also observed at pressure when the phase transition occurred. The Grüneisen parameter was obtained using the vibrational frequency.     

Molecular Beam Epitaxy of Nonstoichiometric Semiconductors and Multiphase Material Systems

When arsenides are grown by molecular beam epitaxy at low substrate temperatures, as much as 2% excess arsenic can be incorporated into the epilayer. This excess arsenic is in the form of antisites, but there is also a substantial concentration of gallium vacancies. With anneal, there is a significant decrease in the arsenic antisite and gallium vancancy concentrations as the excess arsenic precipitates. With further anneal, the arsenic precipitates coarsen. This combination of low substrate temperature molecular beam epitaxy and a subsequent anneal results in a broad spectrum of materials, from highly defected epilayers to a two-phase system of semimetallic arsenic precipitates in an arsenide semiconductor matrix. These materials exhibit some very interesting and useful electrical and optical properties.     

窗口可变滑动相关分析方法在激光诱导击穿光谱谱线自动识别中的应用

激光诱导击穿光谱(LIBS)谱线具有很窄的展宽,且光谱仪因外界温度条件的变化存在波长漂移,光谱数据为离散数字信号,受噪声、谱线重叠及连续背景的影响,信号存在失真和变形。而目前光谱仪自带谱线识别分析软件主要以"就近原则"为主,错误率较高,必须依赖于人眼的观察对比。针对这个问题,在研究LIBS光谱特性的基础上,提出了一种窗口可变滑动相关分析方法(CAASW),用于激光诱导击穿光谱谱线自动识别。以土壤标准物质为样品,对该方法进行了实验分析和评价,与光谱仪自带分析识别软件相比,CAASW明显提高了识别准确率和识别速度,最终实现了谱线的自动识别。     

制冷型红外成像系统内部杂散辐射测量方法

杂散辐射是红外光学系统设计和检测过程中涉及的一项重要指标.为了定量测量红外成像系统内部杂散辐射, 提出一种基于辐射定标的测量方法, 并通过理论推导和实验验证以说明该方法的合理性.首先, 建立了不带光学系统的辐射定标模型, 即探测器直接接收定标源辐射能, 获得探测器内部因素对系统输出的影响; 然后将其与带有光学系统的定标结果进行比较, 得到由光学系统自身辐射对系统输出的影响, 进而计算红外成像系统内部杂散辐射; 最后通过实验证明了本文理论的正确性.该方法操作简单, 对实验条件要求低, 并可以精确地测量红外成像系统内部杂散辐射.可用于指导红外系统设计中的杂散辐射抑制, 验证系统杂散辐射分析结果是否准确以及检测系统杂散辐射指标是否合格.