Bridged bis-pyridinylimino dinickel(II) complexes: Syntheses, characterization, ethylene oligomerization and polymerization

A series of bridged bis(pyridinylimino) ligands were efficiently synthesized through the condensation reaction of 4,4′-methylene-bis(2,6-disubstituted aniline) with 2-pyridinecarboxaldehyde or 2-benzoylpyridine. They reacted with (DME)NiBr₂ to form dinuclear Ni(II) complexes. All resultant compounds were characterized by elemental analysis, IR spectra as well as the single-crystal X-ray diffraction to confirm the structures of ligands and complexes. Activated with methylaluminoxane (MAO), these nickel complexes showed considerably good activities for ethylene oligomerization and polymerization. Their catalytic activities and the properties of PEs obtained were depended on the arched environment of ligand and reaction conditions.     

Preparation of Ce-Zr-O solid solution

A single phase solid solution of Ce-Zr-O can be made by using NH₄HCO₃ solution as precipitating agent. The influence of preparation conditions, such as pH, Zr⁴⁺/(CO₃ ^2-+HCO₃ ^-) and Ce³⁺/Zr⁴⁺ ratio on the formation of the solid solution were investigated. The results show that a single phase Ce-Zr-O solid solution can be formed only under a narrow window of preparation conditions, indicating that some compounds are formed in the precipitating process. The compound may contain Ce³⁺, Zr⁴⁺, CO₃ ^2-, HCO^3-, and OH^-. The solid solution so prepared can be described as Ce_0.37Zr_0.63O₂. This revised version was published online in August 2006 with corrections to the Cover Date.     

Study on pyrolysis kinetics of walnut shell

Slow pyrolysis of walnut shell which is a cheap and abundantly available solid waste was carried out using thermogravimetric analysis. The effects of raw material heating rate on the pyrolysis properties and kinetic parameters were investigated. A two-step consecutive reaction model were used to simulate the pyrolysis process. The kinetic parameters were established by using the pattern search method. Comparison between experimental data and the model prediction indicated that the two-step consecutive reaction model can better describe the slow pyrolysis of walnut shell as the formation of an intermediate during the pyrolysis process was taken into account.     

含氮宾或卡宾的金属羰基簇合物的结构化学研究——Ⅰ.H_2Fe_3(N-C_6H_5)(CO)_9和Fe_3(N-C_6H_5)(μ_3-CO)(CO)_9的合成和结构

含氮宾的两个三核羰基铁簇合物是由[Et_3NH][HFe_3(CO)_(11)]与C_6H_5NCO在苯中反应获得。应用四园衍射仪测定了H_2Fe_3(N-C_6H_5)(CO)_9(Ⅰ)和Fe_3(N-C_6H_5)(μ_3-CO)(CO)_9(Ⅱ)的晶体结构。晶体数据为:C_(15)H_7NO_9Fe_3(Ⅰ),空间群P2_1/a,a=18.343(2),b=9.072(1),c=11.451(1)(?),β=102.03(1)°,V=1863.7(?)~3,Z=4,D_c=2.143g/cm~3;C_(16)H_5NO_(10)Fe_3(Ⅱ),空间群P2_1/c,a=8.634(1),b=13.026(1),c=17.642(2)(?),β=97.68(1)°,V=1966.3(?)~3,Z=4,D_c=1.820g/cm结构系用直接法解出,最后R_(Ⅰ)因子为0.033,R_(Ⅱ)因子为0.027。测定结果表明,(Ⅰ)和(Ⅱ)分子均具有C_s对称性,且三个Fe原子共面,呈近似等边三角形结构。(Ⅰ)中面桥N原子以不对称方式与三个Fe原子成键;(Ⅱ)中面桥羰基以不对称方式与三个Fe原子键连。Fe-N和Fe-C键长分别在1.896-1.938(?)和2.006-2.110(?)之间。     

Preparation and catalytic performance of superfine Ni/BaTiO3 catalyst

Superfine Ni/BaTiO₃ catalysts were prepared by impregnation method and used successfully for CO₂ reforming CH₄ to syngas. The effects of preparation method and the temperatures of calcination, reduction and reaction on the catalytic activity of the Ni/BaTiO₃ system were investigated. This revised version was published online in June 2006 with corrections to the Cover Date.     

CdSe/ZnS-labeled carboxymethyl chitosan as a bioprobe for live cell imaging

A simple and convenient method for the construction of CdSe/ZnS-labeled polysaccharides as bioprobes were developed, which are highly biocompatible and photostable, and have been proven to be suitable for live cell imaging.     

分数导数结合傅里叶最小二乘拟合处理含噪音的重迭信号

提出了一种含噪音重迭信号的综合处理方法 :先用傅里叶最小二乘法拟合噪音数据 ,然后对拟合后的信号求 2 .5次导数 ,在对模拟数据研究的基础上 ,讨论了求导后峰位漂移及其影响因素 ,给出了一个用于矫正峰位值的经验公式。用该方法对模拟和实际的紫外含噪音重迭信号进行处理 ,结果良好     

烷基和烷基苯磺酸钠系列的反相高效液相色谱法

用移动相中含有磷酸二氢钠的反相高效液相色谱法分析了烷基磺酸钠和烷基苯磺酸钠。对前者用电导检测器直接进行检测(无抑制柱),后者用紫外检测器检测。对几种商品十二烷基苯磺酸钠的组分和微乳液中十二烷基磺酸钠的含量进行了测定。得到了满意的结果。     

目视催化褪色计时法测定超痕量钒的研究

本文基于在酸性介质中钒(V)催化溴酸钾氧化酸性铬蓝K褪色的新指示反应,建立了一个催化褪色计时法测定超痕量钒的新方法。在体系中引入活化剂抗坏血酸,灵敏度达2×10~(-12)ng/ml,测定范围在0.0l～3.0ng/ml,同时探讨了反应机理。确立了反应速率方程,方法简便经济,已用于天然水中痕量钒的测定。