Neutrals ejection in intense femtosecond laser ablation

Time-resolved shadowgraphs and holograms of intense femtosecond laser ablation of aluminum are reported. The different bending trends of interference fringes are found in the ablations of aluminum and other materials at probe wavelengths of 400 and 800 nm, for the first time to our knowledge, which could be attributed to the ejection of massive neutral droplets induced by critical-point phase separation during the second material ejection.     

High pulse energy mode-locked multicore photonic crystal fiber laser

A high pulse energy passively mode-locked fiber laser operating in the all-normal dispersion regime is demonstrated. The gain material is an Yb-doped multicore photonic crystal fiber with 18 cores in array-type geometry. Robust and self-starting mode locking is achieved using a fast semiconductor saturable absorber mirror. The laser generates 180?nJ chirped pulses at a 14.48?MHz repetition rate for an average power of 2.6?W. The 1.15?ps output pulses are compressed to 690?fs outside the cavity.     

Theoretical analysis of some problems in the measurement of beam divergence angle for EAST neutral beam injector

Beam angular divergence is one of the indicators to evaluate the beam quality. Operating parameters of the beam extraction system could be adjusted to gain better beam quality following the measurement results, which will be helpful not only to study the transmission characteristics of the beam and the power distribution on the heat load components, but also to understand the real-time working condition of the ion source and beam extraction system. This study includes: (1) the theoretical analysis of beam extraction pulse duration for measurement of beam angular divergence; (2) the theoretical analysis of beam intensity distribution during beam transmission for Experimental Advanced Superconducting Tokomak (EAST) neutral beam injector. Those theoretical analyses could point the way to the measurement of beam divergence angle for EAST neutral beam injector.

     

Algebraic Multigrid Preconditioning for Finite Element Solution of Inhomogeneous Elastic Inclusion Problems in Articular Cartilage

In studying biomechanical deformation in articular cartilage, the presence of cells (chondrocytes) necessitates the consideration of inhomogeneous elasticity problems in which cells are idealized as soft inclusions within a stiff extracellular matrix. An analytical solution of a soft inclusion problem is derived and used to evaluate iterative numerical solutions of the associated linear algebraic system based on discretization via the finite element method, and use of an iterative conjugate gradient method with algebraic multigrid preconditioning (AMG-PCG). Accuracy and efficiency of the AMG-PCG algorithm is compared to two other conjugate gradient algorithms with diagonal preconditioning (DS-PCG) or a modified incomplete LU decomposition (Euclid-PCG) based on comparison to the analytical solution. While all three algorithms are shown to be accurate, the AMG-PCG algorithm is demonstrated to provide significant savings in CPU time as the number of nodal unknowns is increased. In contrast to the other two algorithms, the AMG-PCG algorithm also exhibits little sensitivity of CPU time and number of iterations to variations in material properties that are known to significantly affect model variables. Results demonstrate the benefits of algebraic multigrid preconditioners for the iterative solution of assembled linear systems based on finite element modeling of soft elastic inclusion problems and may be particularly advantageous for large scale problems with many nodal unknowns.     

基于14 MeV中子的烧氚历史诊断模拟研究

针对直接测量16.7 MeV进行烧氚历史诊断所需聚变产额高的情况,模拟研究了利用14 MeV中子与副靶作用产生的非弹伽马进行烧氚历史诊断的情况,计算了几种材料14 MeV中子作用产生的次级伽马能谱以及切伦科夫辐射阈能之上的非弹伽马数目,对副靶材料和厚度进行了选择。计算了14 MeV中子产生的切伦科夫光子时间谱,分析了光电转换器件处伽马、电子以及正电子等噪声信号,分析了气体切伦科夫系统测量统计涨落与聚变中子产额之间的关系,确定了气体切伦科夫系统所适用的最低聚变中子产额,通过测量14 MeV中子与副靶产生的非弹伽马进行烧氚历史诊断较直接测量16.7 MeV伽马可将测量所需聚变中子产额降低2个量级。     

A novel MI-insensitive and filterless frequency octupling scheme based on two parallel dual-parallel Mach–Zehnder modulators

A novel MI-insensitive and filterless frequency octupling scheme based on two parallel dual-parallel Mach–Zehnder modulators (DP-MZMs) is proposed. The proposed scheme is not sensitive to modulation index and relatively strong MMW signal with good radio frequency spurious suppression ratio (RFSSR) can be obtained without strict requirement on modulation index. Filterless feature makes the scheme quite suitable for wavelength division multiplexing (WDM) applications. For verification, a 60 GHz millimeter wave with 44 dB RFSSR is generated from a 7.5 GHz radio frequency wave by simulation. Performance of the proposed scheme has been characterized under different conditions including DC-bias drifts of MZMs, different amplitudes of RF inputs and different extinction ratios of MZMs.     

Optical pump-probe measurements of local nuclear spin coherence in semiconductor quantum wells

We demonstrate local manipulation and detection of nuclear spin coherence in semiconductor quantum wells by an optical pump-probe technique combined with pulse rf NMR. The Larmor precession of photoexcited electron spins is monitored by time-resolved Kerr rotation (TRKR) as a measure of nuclear magnetic field. Under the irradiation of resonant pulsed rf magnetic fields, Rabi oscillations of nuclear spins are traced by TRKR signals. The intrinsic coherence time evaluated by a spin-echo technique reveals the dependence on the orientation of the magnetic field with respect to the crystalline axis as expected by the nearest neighbor dipole-dipole interaction.     

Parameter determination from current–voltage characteristics of HgCdTe photodiodes in forward bias region

Current–voltage characteristics of HgCdTe photodiodes in the forward bias region have been modeled considering mechanisms including drift-diffusion current, recombination current, metal-semiconductor contact and constant series resistance. Moreover, a fitting method based on the genetic algorithm has been developed to obtain values of related physical parameters from the measured dynamic resistance–voltage curves. Fitting results of $n^+$ -on- $p$ planar devices with different cutoff wavelengths are presented to illustrate the model and method, which are available and promising in acquiring device parameter values and evaluating the electrode contact quality.     

Logarithmic conformal field theory and boundary effects in the dimer model

We study the finite-size corrections of the dimer model on a square lattice with two different boundary conditions: free and periodic. We find that the finite-size corrections depend in a crucial way on the parity of ; we also show that such unusual finite-size behavior can be fully explained in the framework of the logarithmic conformal field theory.