Optical properties and structures of silver thin films deposited by magnetron sputtering with different thicknesses

A series of thin Ag films with different thicknesses grown under identical conditions are analyzed by means of spectrophotometer. From these measurements the values of refractive index and extinction coefficient are calculated. The films are deposited onto BK7 glass substrates by direct current (DC) magnetron sputtering. It is found that the optical properties of the Ag films can be affected by films thickness.Below critical thickness of 17 nm, which is the thickness at which Ag films form continuous films, the optical properties and constants vary significantly with thickness increasing and then tend to a stable value up to about 40 nm. At the same time, X-ray diffraction measurement is carried out to examine the microstructure evolution of Ag films as a function of films thickness. The relation between optical properties and microstructure is discussed.     

机械故障模糊诊断中模糊矩阵的可视化处理与分析

通过对机械故障诊断中的模糊矩阵及采用不同数学模型运算后的结果进行可视化处理,得到二维图谱和三维图谱,使故障与征兆之间的关系更加明确     

Electrochemical Treatment for Effectively Tuning Thermoelectric Properties of Free‐Standing Poly(3‐methylthiophene) Films

The degree of oxidation of conducting polymers has great influence on their thermoelectric properties. Free‐standing poly(3‐methylthiophene) (P3MeT) films were prepared by electrochemical polymerization in boron trifluoride diethyl etherate, and the fresh films were treated electrochemically with a solution of propylene carbonate/lithium perchlorate as mediator. The conductivity of the resultant P3MeT films depends on the doping level, which is controlled by a constant potential from ?0.5 to 1.4 V. The optimum electrical conductivity (78.9 S cm^?1 at 0.5 V) and a significant increase in the Seebeck coefficient (64.3 μV K^?1 at ?0.5 V) are important for achieving an optimum power factor at an optimal potential. The power factor of electrochemically treated P3MeT films reached its maximum value of 4.03 μW m^?1 K^?2 at 0.5 V. Moreover, after two months, it still exhibited a value of 3.75 μW m^?1 K^?2, and thus was more stable than pristine P3MeT due to exchange of doping ions in films under ambient conditions. This electrochemical treatment is a significant alternative method for optimizing the thermoelectric power factor of conducting polymer films.     

Accuracy, precision and sensitivity in cyclic INAA with short-lived radionuclides

Repeated irradiation enhances the precision and sensitivity of INAA based on short-live radionuclides, but entail systematic losses due to dead time. The relative standard deviation in the net peak area decreases with the square root of the number of cycles while the systematic bias increases with it. The limits of decision, detection and determination decrease in a somewhat more complicated way with the number of cycles. The derived formulation is applied to the determination of selenium in hair by the 161.9 keV photopeak of^77mSe,T _1/2=17.8 s.     

Adaptive collision meshing and satellite droplet formation in spray simulations

Improved numerical methods and physical models have been applied to droplet collision modeling. Numerically, an adaptive collision mesh method is developed to calculate collision rate. This method produces a collision mesh that is independent of the gas phase mesh and adaptively refined according to local parcel number density. An existing model describing the satellite droplet formation during the collision process is improved to reflect the experimental findings that the satellite droplets are much smaller than the parent droplets. The adaptive collision mesh and the improved satellite model have been used to simulate three impinging spray experiments. The model was able to qualitatively predict the occurrence of small satellite drops and bi-modal post-collision drop size distributions. The effect of the collision mesh and the satellite droplet model on a high-speed non-evaporating diesel spray is also assessed.     

Cross‐Linked Aptamer–Lipid Micelles for Excellent Stability and Specificity in Target‐Cell Recognition

The specific binding ability of DNA–lipid micelles (DLMs) can be increased by the introduction of an aptamer. However, supramolecular micellar structures based on self‐assemblies of amphiphilic DLMs are expected to demonstrate low stability when interacting with cell membranes under certain conditions, which could lead to a reduction in selectivity for targeting cancer cells. We herein report a straightforward cross‐linking strategy that relies on a methacrylamide branch to link aptamer and lipid segments. By an efficient photoinduced polymerization process, covalently linked aptamer–lipid units help stabilize the micelle structure and enhance aptamer probe stability, further improving the targeting ability of the resulting nanoassembly. Besides the development of a facile cross‐linking method, this study clarifies the relationship between aptamer–lipid concentration and the corresponding binding ability.     

On the magnetic alignment of metal ions in a DNA-mimic double helix

We computed by spin-polarized DFT the structure and the electronic properties of an infinite periodic wire constituted of planar Cu-bridged hydroxypyridone chelator base pairs and of a similarly stacked finite dimer. The Cu centers undergo electronic hybridization with the bases. There is an unpaired spin per plane, and the majority-spins manifest ordering: The ferromagnetic and antiferromagnetic phases are energetically degenerate. The total magnetization of the ferromagnetic wire depends linearly on the number of planes in the stack. The combination of interplane spin coupling and intraplane metal-hydroxypyridone coupling makes this system very appealing for electronic and magnetic device exploitation.     

Preparation and photoluminescence of TiO2/PS composite system

<正>A TiO_2/porous silicon(PS) composite system is prepared by chemical vapor deposition.The crystal form with anatase phase of the samples is evaluated by X-ray diffraction and ultraviolet-visible(UV-vis) absorbance spectra,and the morphology with microsphere of TiO_2 particles is characterized by scanning electron microscopy.The composite system formed by this technique gives a broad blue luminescence and the mechanism of photoluminescence with TiO_2/PS is also discussed.     

紫外光激发下氧化锌纳米线的发光特性研究

室温条件下,用355 nm的激光激发氧化锌纳米线,测量了其发光光谱.观察到半宽度较小、峰值波长约382 nm的紫光峰和半宽度较宽、峰值波长约507 nm的绿光峰;两峰的发光强度随激发光功率密度的变化而变化,且均存在饱和效应,但各自的变化规律及饱和值的大小不同;紫光峰的中心波长随激发光功率密度的增加而发生了明显的红移.对两峰产生的机理、强度饱和值存在的原由、强度随激发光功率密度变化及紫光峰红移的起因进行了分析.     

高功率半导体激光端面泵浦方形掺Nd3+离子激光晶体热形变研究

为了解决高功率半导体激光器端面泵浦激光晶体引起的热效应问题,激光晶体泵浦端面的热形变必须进行准确的计算.通过对于全固态激光器中激光晶体的工作特点分析,建立了矩形截面激光晶体热分析模型.基于热传导方程,提出了泊松方程的一种新解,并获得了矩形截面激光晶体端面热形变分布的一般解析表达式.同时讨论了半导体激光器偏心泵浦激光晶体给端面热形变带来的影响.与有限元分析方法以及其他数值分析方法相比,解析分析方法不会给计算引入任何的误差.热形变的解析分析为解决激光晶体的热效应问题以及提高激光器的性能提供了理论的依据.