掺锂硼酸盐复合凝胶的制备与表征

以硼酸三正丁酯、甲醇锂为主要原料,甲醇和四氢呋喃为溶剂,利用溶胶-凝胶法通过优化工艺制备了掺锂硼酸盐凝胶。分别采用粘度分析、热分析、X射线衍射、扫描电镜、透射电镜及红外光谱,对凝胶形成过程、物相、成分、微观形貌等进行表征。结果表明：对凝胶在150 ℃条件下处理4 h获得干凝胶,干凝胶在450 ℃左右产生结晶的倾向,492 ℃干凝胶已经完全从非晶态转变为晶态,在808 ℃左右晶体熔解;干凝胶是多孔网络结构材料;干凝胶网络结构的基本组成单元是以≡B—O—B=键的方式连接的,其中一个硼原子是四配位,另一个是三配位的。     

Presodiation Strategies for the Promotion of Sodium-Based Energy Storage Systems

Nowadays sodium-based energy storage systems (Na-based ESSs) have been widely researched as it possesses the possibility to replace traditional energy storage media to become next generation energy storage system. However, due to the irreversible loss of sodium ions in the first cycle, development of Na-based ESSs is limited. Presodiation, as a strategy of adding excess sodium ions to the system in advance, accomplishes the enhancement of electrochemical performance. In this minireview, different presodiation strategies applied in sodium-based energy storage systems will be summarized in detail, their functions and corresponding mechanisms will be discussed as well. Furthermore, the current novel application of presodiation method in other aspects of Na-based ESSs will be mentioned additionally. At last, in the view of present research status of presodiation, issues that can be mitigated are put forward and guidelines are given on how to deliberate in-depth presodiation technology in the future, dedicating to promote the further development of Na-based ESSs.     

Local Field Induced Mass Transfer: New Insight into Nano-electrocatalysis

Unravelling the complex kinetics of electrocatalysis is essential for the design of electrocatalysts with high performance. Mass transfer and electron transfer are two primary factors that need to be optimized in order to enhance electrocatalytic reactions. The use of nanocatalysts proves to be a promising way of promoting the performance of electrocatalytic reactions, this improvement is usually attributed to their ability to enhance electron transfer. However, when catalysts are taken down to the nanoscale, their size is comparable to the thickness of an electrical double layer, so any curvature can lead to an inhomogeneous local electric field on the electrode, which then changes the mass transfer essentially. In this article, we introduce the new concept of local-field-induced mass transfer in nano-electrocatalytic systems, and provide a brief review of recent progress, revealing its effect on nano-electrocatalysis, which may bring new insight into the future design of nano-electrocatalysts.     

Chemical Constituents of the Roots of Phlomis betonicoides and Their Anti-Rotavirus Activity

Chemistry of Natural Compounds - Two new isobenzofuranone derivatives (1 and 2) together with six known compounds (3–8) were isolated from the roots of Phlomis betonicoides, a highly sweet...     

Developmental validation of the Yfiler Platinum PCR Amplification Kit for forensic genetic caseworks and databases

Y chromosome kits are successfully applied in cases where human biological material exists. With the development of genotyping ability, more Y chromosomal markers are needed for finer identification of male individuals and lineages. In this study, a developmental validation of a newly emerged Y chromosome kit that combines two different kinds of markers: 38 Y-STRs and 3 Y-indels are conducted. The results show that this kit has high sensitivity when there is a small amount of DNA (125 pg), more than one male (minor:major = 1:7), or a mixture of males and females (male:female = 125pg:1875pg), inhibited substances (800 μM hematin and more than 1600 ng/μL humic acid). The kit exhibits high precision level with a standard deviation of allele size no more than 0.14 nt. Locus DYS481 shows the largest stutter rate, with three stutters per true allele. Population samples are well identified (MP of 0.001106), and mutations can be observed in father–son pairs (46 mutations in 70 pairs, 10 in locus DYS627). Out of all the population samples, 13.2% belong to haplogroup M117-O2a2b1a1, with their ethnic group being Han Chinese. The results show that this kit can improve the performance of identifying male individuals, obtaining more unique haplotypes (increasing from 894 to 918 of 1000 male samples) and higher discrimination capacity (increasing from 0.942 to 0.955) in this study compared to previous widely used Yfiler Plus kit. Besides, it gives information about their paternal lineages in forensic genetic casework and genealogical database construction.     

Two-Level Finite Element Iterative Algorithm Based on Stabilized Method for the Stationary Incompressible Magnetohydrodynamics

In this paper, based on the stabilization technique, the Oseen iterative method and the two-level finite element algorithm are combined to numerically solve the stationary incompressible magnetohydrodynamic (MHD) equations. For the low regularity of the magnetic field, when dealing with the magnetic field sub-problem, the Lagrange multiplier technique is used. The stabilized method is applied to approximate the flow field sub-problem to circumvent the inf-sup condition restrictions. One- and two-level stabilized finite element algorithms are presented, and their stability and convergence analysis is given. The two-level method uses the Oseen iteration to solve the nonlinear MHD equations on a coarse grid of size H, and then employs the linearized correction on a fine grid with grid size h. The error analysis shows that when the grid sizes satisfy h=O(H2), the two-level stabilization method has the same convergence order as the one-level one. However, the former saves more computational cost than the latter one. Finally, through some numerical experiments, it has been verified that our proposed method is effective. The two-level stabilized method takes less than half the time of the one-level one when using the second class Nédélec element to approximate magnetic field, and even takes almost a third of the computing time of the one-level one when adopting the first class Nédélec element.     

Tetrabromobisphenol Exposure Impairs Bovine Oocyte Maturation by Inducing Mitochondrial Dysfunction

Tetrabromobisphenol (TBBPA) is the most widely used brominated flame retardant in the world and displays toxicity to humans and animals. However, few studies have focused on its impact on oocyte maturation. Here, TBBPA was added to the culture medium of bovine cumulus–oocyte complexes (COCs) to examine its effect on oocytes. We found that TBBPA exposure displayed an adverse influence on oocyte maturation and subsequent embryonic development. The results of this study showed that TBBPA exposure induced oocyte meiotic failure by disturbing the polar-body extrusion of oocytes and the expansion of cumulus cells. We further found that TBBPA exposure led to defective spindle assembly and chromosome alignment. Meanwhile, TBBPA induced oxidative stress and early apoptosis by mediating the expression of superoxide dismutase 2 (SOD2). TBBPA exposure also caused mitochondrial dysfunction, displaying a decrease in mitochondrial membrane potential, mitochondrial content, mtDNA copy number, and ATP levels, which are regulated by the expression of pyruvate dehydrogenase kinase 3 (PDK3). In addition, the developmental competence of oocytes and the quality of blastocysts were also reduced after TBBPA treatment. These results demonstrated that TBBPA exposure impaired oocyte maturation and developmental competence by disrupting both nuclear and cytoplasmic maturation of the oocyte, which might have been caused by oxidative stress induced by mitochondrial dysfunction.     

Enhancing Bioactive Saponin Content of Raphanus sativus Extract by Thermal Processing at Various Conditions

Pickled radish (Raphanus sativus) is a traditional Asian ingredient, but the traditional method takes decades to make this product. To optimize such a process, this study compared the saponin content of pickled radishes with different thermal processing and traditional processes (production time of 7 days, 10 years, and 20 years) and evaluated the effects of different thermal processes on the formation of radish saponin through kinetics study and mass spectrometry. The results showed that increasing the pickling time enhanced the formation of saponin in commercial pickled radishes (25 °C, 7 days, 6.50 ± 1.46 mg g⁻¹; 3650 days, 23.11 ± 1.22 mg g⁻¹), but these increases were lower than those induced by thermal processing (70 °C 30 days 24.24 ± 1.01 mg g⁻¹). However, it was found that the pickling time of more than 10 years and the processing temperature of more than 80 °C reduce the saponin content. Liquid chromatography–mass spectrometry (LC-MS) analysis showed that the major saponin in untreated radish was Tupistroside G, whereas treated samples contained Asparagoside A and Timosaponin A1. Moreover, this study elucidated the chemical structure of saponins in TPR. The findings indicated that thermal treatment could induce functional saponin conversion in plants, and such a mechanism can also be used to improve the health efficacy of plant-based crops.     

Shikonin as a WT1 Inhibitor Promotes Promyeloid Leukemia Cell Differentiation

This study aims to observe the differentiating effect of shikonin on Wilms’ tumor 1 (WT1)-positive HL-60 cells and investigate the fate of the differentiated leukemia cells. WT1 overexpression unaffected cell viability but promoted resistance to H₂O₂-induced DNA injury and cell apoptosis. The binding of shikonin to the WT1 protein was confirmed by molecular docking and drug affinity reaction target stability (DARTS). Shikonin at the non-cytotoxic concentration could decrease the WT1 protein and simultaneously reduced the CD34 protein and increased the CD11b protein in a dose-dependent manner in normal HL-60 cells but not in WT1-overexpressed HL-60 cells. Shikonin unaffected HL-60 cell viability in 48 h. However, it lasted for 10 days; could attenuate cell proliferation, mitochondrial membrane potential (MMP), and self-renewal; prevent the cell cycle; promote cell apoptosis. In a mouse leukemia model, shikonin could decrease the WT1 protein to prevent leukemia development in a dose-dependent manner. In this study, we also confirmed preliminarily the protein–protein interactions between WT1 and CD34 in molecular docking and CO-IP assay. Our results suggest that: 1. shikonin can down-regulate the WT1 protein level for leukemia differentiation therapy, and 2. the interaction between WT1 and CD34 proteins may be responsible for granulocyte/monocyte immaturity in HL-60 cells.     

By-Product of the Red Ginseng Manufacturing Process as Potential Material for Use as Cosmetics: Chemical Profiling and In Vitro Antioxidant and Whitening Activities

Red ginseng (RG), which is obtained from heated Panax ginseng and is produced by steaming followed by drying, is a valuable herb in Asian countries. Steamed ginseng dew (SGD) is a by-product produced in processing red ginseng. In the present study, phytochemical profiling of extracts of red ginseng and steamed ginseng dew was carried out using gas chromatography-mass spectrometry (GC-MS) and rapid resolution liquid chromatography coupled with quadrupole-time-of-flight mass spectrometry (RRLC-Q-TOF-MS) analysis. Additionally, antioxidant activities (DPPH, ·OH, and ABTS scavenging ability) and whitening activities (tyrosinase and elastase inhibitory activity) were analyzed. Phytochemical profiling revealed the presence of 66 and 28 compounds that were non-saponin components in chloroform extracts of red ginseng and steamed ginseng dew (RG-CE and SGD-CE), respectively. Meanwhile, there were 20 ginsenosides identified in n-butanol extracts of red ginseng and steamed ginseng dew (RG-NBE and SGD-NBE). By comparing the different polar extracts of red ginseng and steamed ginseng dew, it was found that the ethyl acetate extract of red ginseng (RG-EAE) had the best antioxidant capacity and whitening effect, the water extract of steamed ginseng dew (SGD-WE) had stronger antioxidant capacity, and the SGD-NBE and SGD-CE had a better whitening effect. This study shows that RG and SGD have tremendous potential to be used in the cosmetic industries.