Simple preparation of birnessite-type MnO2 nanoflakes with multi-walled carbon nanotubes for the sensitive detection of hydrogen peroxide

Ionics - Manganese oxide nanoflakes incorporated functionalized multi-walled carbon nanotubes (f-MWCNTs/MnO2 NFs) have been prepared through a simple chemical method. The morphology and structure...     

Catalytic cyclopolymerization and copolymerization of 1,6‐heptadiynes by Mo(CO)6

The catalytic polymerization of a series of 1,6‐heptadiynes (1–4) by Mo(CO)₆ under simple thermal conditions produces corresponding poly(1,6‐heptadiyne)s with highly conjugated polyenes. The number‐average molecular weights of the polymers range from 2400 to 110,000. The structures of the polymers depend on the types of monomers employed. Namely, diethyl dipropargylmalonate (DEDPM) and 1 result in a polyene backbone consisting of only five‐membered rings, whereas the remaining monomers (2–4) result in a mixture of both five‐membered and six‐membered ring structures. The copolymerization of DEDPM and phenylacetylene (PA) can also be effected by the same catalysis to yield a polyene backbone consisting of only five‐membered rings as well as PA. The relative molar ratio of the two monomers determines the yields and molecular weights of the copolymers. Comparative studies show that Mo(CO)₆ exhibits reactivity toward DEDPM alone, thus initially catalyzing metathesis cyclopolymerization of DEDPM followed by copolymerization with PA. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2663–2670, 2000     

Synthesis and characterization of new organosoluble polyamides derived from bis[4‐(4‐carboxyphenoxy) phenyl]diphenylmethane

A new dicarboxylic acid containing a diphenylmethylene linkage, bis[4‐(4‐carboxyphenoxy)phenyl]diphenylmethane (BCAPD), was prepared from bis(4‐hydroxphenyl)diphenylmethane and p‐fluorobenzonitrile via an aromatic nucleophilic substitution reaction followed by hydrolysis. A series of novel polyamides were prepared by the direct polycondensation of BCAPD and various aromatic diamines. The polymers were produced with moderate to high inherent viscosities of 0.80–0.85 dL g^?1. Nearly all the polymers were readily soluble in polar solvents such as N‐methyl‐2‐pyrrolidinone, N,N‐dimethylacetamide, N,N‐dimethylformamide, and dimethyl sulfoxide, in less polar solvents such as pyridine and cyclohexanone, and in tetrahydrofuran. All the polymers were amorphous, and the polyamide films had a tensile strength and a tensile modulus greater than 80 MPa and 2.0 GPa, respectively. These polyamides had glass‐transition temperatures between 249 and 274 °C, and their temperatures at a 10% weight loss were 477–538 and 483–540 °C in nitrogen and air atmospheres, respectively. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1156–1161, 2001     

Synthesis and properties of poly‐(2‐ethynylpyridinium bromide) having propargyl side chains

Poly‐(2‐ethynylpyridinum bromide) (PEPBP) having propargyl side chains was prepared by the direct polymerization of 2‐ethynylpyridine and propargyl bromide under mild reaction conditions without any initiator and catalysts. The polymerization proceeded well to give PEPBP with propargyl side chains in relatively high yields. Various spectral data for the polymer structure indicated that the conjugated polymer system having N‐propargylpyridinum substituent was formed. This ionic polymer was completely soluble in water, methanol, dimethylformamide, dimethyl sulfoxide, and N,N‐dimethylacetamide and well processable into thin homogeneous film. The photoluminescence intensity (λ_max = 760 nm) of this polymer increased as the temperature was increased. At 1 KHz and room temperature, this polymer has k′ = 2.9 and σ = 7.3 × 10^?10 (S/cm). © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3151–3158, 2001     

Strategy for Better Ordering in Diblock Copolymer Based Nanocomposites

A simple approach to improve the structural ordering in block copolymer/nanoparticle nanocomposites is presented. It is to blend a small molecular weight homopolymer with the composites, which can uniformly swell the preferred domain where the nanoparticles locate and increase the conformational entropy of the domain. Consequently, the interfaces between the block copolymer domains become smooth that improves the long range order in the nanocomposites. Furthermore, the uniform swelling of the preferred domain by the homopolymer will allow higher loading of nanoparticles without adversely affecting the long range order.

     

Solvent Vapor‐Induced Nanowire Formation in Poly(3‐hexylthiophene) Thin Films

Summary: Nanowire lengths and length‐to‐width aspect ratios in regioregular poly(3‐hexylthiophene) (P3HT) were simply controlled through changes in the solvent vapor pressure during solidification. It is demonstrated that the nanowires grew by rod‐to‐rod association, in which the molecular long axis of the P3HT chains appeared to be well‐oriented parallel to the silicon substrate (Si/SiO_x). The formation of the nanowires took place by one dimensional self‐assembly, governed by π‐π stacking of the P3HT units.

TEM high contrast images showing P3HT nanowires fabricated by spin‐coating under a solvent vapor pressure.     

Direct chemical analysis of uv laser ablation products of organic polymers by using selective ion monitoring mode in gas chromatography/mass spectrometry

Trace quantities of laser ablated organic polymers were analyzed by using commercial capillary column gas chromatography/mass spectrometry; the instrument was modified so that the iaser ablation products could be introduced into the capillary column directly and the constituents of each peak in the chromatogram were identified by using a mass spectrometer. The present study takes advantage of the selective ion monitoring mode for significantly improving the sensitivity of the mass spectrometer as a detector, which is critical in anatyzing the trace quantities and confirming the presence or absence of the species of interest in laser ablated polymers. The initial composition of the laser ablated polymers was obtained by using an electron impact reflectron time-of-flight mass spectrometer and the possible structure of the fragments observed in the spectra was proposed based on the structure of the polymers.     

Linear chains in polymeric di­cyclo­hexyl­ammonium tri­butyl­(4‐oxo‐4H‐pyran‐2,6‐di­carboxyl­ato)­stannate and methyl­phenyl­ammonium tri­butyl(pyridine‐2,6‐di­carboxyl­ato)­stannate containing trigonal bipyramidal tin

catena‐Poly­[di­cyclo­hexyl­ammonium [tri­butyl­tin‐μ‐(4‐oxo‐4H‐pyran‐2,6‐di­carboxyl­ato‐O²:O⁶)]], (C₁₂­H₂₄N)­[Sn(C₇­H₂­O₆)(C₄H₉)₃], consists of 4‐oxo‐4H‐pyran‐2,6‐di­carboxyl­ato groups that axially link adjacent tri­butyl­tin units into a linear polyanionic chain. The ammonium counter‐ions surround the chain, and each cation forms a pair of hydrogen bonds to the double‐bond carbonyl O atoms of the same dianionic group. The chain propagates in a zigzag manner along the c axis of the monoclinic cell. In catena‐poly­[methyl­(phenyl)­ammonium [tri­butyl­tin‐μ‐(pyridine‐2,6‐di­carboxyl­ato‐O²:O⁶)]], (C₇H₁₀N)­[Sn(C₇H₃NO₄)­(C₄H₉)₃], the pyridine‐2,6‐di­carboxyl­ato groups also link the tri­butyl­tin groups into a chain, but the hydrogen‐bonded chain propagates linearly on the ac face of the monoclinic cell.     

Di­cyclo­hexyl­ammonium 2,4‐di­chloro­phenoxy­acetate and (2,4‐di­chloro­phenoxy­acetato‐O,O′)bis­(tri­phenylphosphine‐P)silver(I)

The monoclinic cell of di­cyclo­hexyl­ammonium 2,4‐di­chloro­phenoxy­acetate contains four C₁₂H₂₄N⁺·C₅H₈Cl₂O₃^? ion pairs. The ammonium N atom is hydrogen bonded to the oxy­gen ends of two carboxyl groups to form a 12‐membered O—C—O?HNH?O—C—O?HNH ring. In (2,4‐di­chloro­phenoxy­lacetato)­bis­(tri­phenyl­phosphine)silver(I), [Ag(C₈H₅Cl₂O₃)(C₁₈H₁₅P)₂], the carboxyl CO₂ unit chelates to the Ag atom in an anisobidentate manner [Ag—O = 2.436 (2) and 2.517 (2) Å]; the Ag atom shows distorted tetrahedral geometry.