利用微悬臂梁表面应力研究聚N-异丙基丙烯酰胺分子的构象转变

提出了一种基于微悬臂梁传感技术研究大分子折叠/构象转变的新方法.通过分子自组装的方法将热敏性的聚N-异丙基丙烯酰胺(PNIPAM)分子链修饰到微悬臂梁的单侧表面，用光杠杆技术检测温度在20—40℃之间变化时由于微悬臂梁上的PNIPAM分子在水中的构象转变所引起的微悬臂梁变形.实验结果显示：在升温过程中，微悬臂梁的表面应力发生了变化并且导致微悬臂梁产生了弯曲变形，这个过程对应着微悬臂梁上的PNIPAM分子从无规线团构象到塌缩小球构象的构象转变.在降温过程中，微悬臂梁发生了反方向的弯曲变形，这对应着PNIPA 关键词： 构象转变 聚N-异丙基丙烯酰胺分子链 表面应力 微悬臂梁     

沿直线的垂直方向匀速直线运动的带电直线的电场

本文利用相对论变换关系计算了沿直线的垂直方向匀速运动的带电直线的电场.     

A Linear Time Algorithm for Constructing Maximally Symmetric Straight Line Drawings of Triconnected Planar Graphs

Symmetry is one of the most important aesthetic criteria in graph drawing because it reveals structure in the graph. To draw graphs symmetrically, we employ two steps. The first step is to find appropriate automorphisms. The second step is to draw the graph to display the automorphisms. Our aim in this paper is to construct maximally symmetric straight line drawings of triconnected planar graphs in linear time. Previously known algorithms run in quadratic time. We show that an algorithm of Fontet can be used to find an embedding in the plane with the maximum number of symmetries, and present a new algorithm for finding a straight line drawing that achieves that maximum. Both algorithms run in linear time.     

Feature Selection using Fuzzy Support Vector Machines

The feature selection consists of obtaining a subset of these features to optimally realize the task without the irrelevant ones. Since it can provide faster and cost-effective learning machines and also improve the prediction performance of the predictors, it is a crucial step in machine learning. The feature selection methods using support machines have obtained satisfactory results, but the noises and outliers often reduce the performance. In this paper, we propose a feature selection approach using fuzzy support vector machines and compare it with the previous work, the results of experiments on the UCI data sets show that feature selection using fuzzy SVM obtains better results than using SVM.     

Nd∶NaR(WO_4)_2晶体生长(R=Bi,Y)

采用提拉法生长出了掺钕钨酸铋钠[Nd∶NaBi(WO4)2,简称Nd∶NBW]和掺钕钨酸钇钠[Nd∶NaY(WO4)2,简称Nd∶NYW]晶体,并给出了制备无开裂优质Nd∶NBW和Nd∶NYW晶体的最佳生长工艺参数。从XRD分析得到Nd∶NBW和Nd∶NYW晶体的晶胞参数,并分析了晶体的拉曼光谱,认为二者结构基本相同,为四方晶系、白钨矿结构、I41/a空间群。由吸收光谱可以看出,Nd∶NBW在802nm有较强的吸收峰,Nd∶NYW在804nm、752nm、586nm附近有较强、较宽的吸收峰,二者均适合于LD泵浦;计算了晶体中Nd3+的吸收截面积。     

Preparation of antimicrobial poly(vinyl alcohol) nanofibers containing silver nanoparticles

Polyvinyl alcohol (PVA) nanofibers containing Ag nanoparticles were prepared by electrospinning PVA/silver nitrate (AgNO₃) aqueous solutions, followed by short heat treatment, and their antimicrobial activity was investigated for wound dressing applications. Since PVA is a water soluble and biocompatible polymer, it is one of the best materials for the preparation of wound dressing nanofibers. After heat treatment at 155 °C for 3 min, the PVA/AgNO₃ nanofibers became insoluble, while the Ag⁺ ions therein were reduced so as to produce a large number of Ag nanoparticles situated preferentially on their surface. The residual Ag⁺ ions were reduced by subsequent UV irradiation for 3 h. The average diameter of the Ag nanoparticles after the heat treatment was 5.9 nm and this value increased slightly to 6.3 nm after UV irradiation. It was found that most of the Ag⁺ ions were reduced by the simple heat treatment. The PVA nanofibers containing Ag nanoparticles showed very strong antimicrobial activity. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2468–2474, 2006     

掺Eu3+硅基材料的发光性质

通过溶胶－凝胶技术制备了掺Eu^3 的硅基材料并测试了其三维荧光光谱、激光谱和发射光谱，结果显示，最佳激发波波长为350nm,最强荧光波长为620nm；在350nm光激发下的发射光谱显示Eu^3 的特征发射光谱，产生4条谱带，分别是577nm(^5D0-^7F0)，588nm(^5D0-^7F1),596nm(^5D0-^7F1)和610nm(^5D0-^7F2)。     

Multiporous hollow polymer particles

Hollow particles with interconnected cavities have been prepared by a simple modified suspension polymerization of acrylate monomers in the incorporation of a phase inversion process and polymerizable emulsifier. The morphology of particles has been characterized by scanning electron micrographs (SEMs). Based on observations made using an optical microscope equipped with a digital camera and SEM images of particles obtained under different conditions, the formation mechanisms for multiporous hollow particles are discussed.     

Theoretical STM images of alkaline-earth metal adsorbed Si(1 1 1)3 × 2 surfaces

We have performed total-energy calculations to study theoretical scanning tunneling microscopy (STM) images of the Si(1 1 1)3 × 2 surfaces induced by the adsorption of alkaline-earth metals (AEMs). Previously, in a series of works on Ba/Si(1 1 1) system, we have found that the observed Si(1 1 1)3 × 1-Ba LEED phase indeed has a 3 × 2 periodicity with a Ba coverage of 1/6 ML and the HCC substrate structure. Based on results of the Ba case, we proposed that the HCC structure is also adopted for other AEM atoms, which was confirmed by our recent work. In this paper, we mainly report the STM simulations for different AEM systems to compare with existing experimental data. We discuss the difference in the detailed STM images for different AEM adsorbates. Especially, the difference in filled-state images between Mg and other AEM atoms is attributed to the strong Mg-Si interaction.     

聚异丁烯高活性端基含量及相对分子质量测定方法的研究

综合使用核磁，VPO和近红外光谱分析技术对聚异丁烯活性端基含量以及相对分子质量的测定进行了详细研究，分别建立核测定聚异丁烯活性端基含量以及其他烯键含量和近红外光谱快速测量聚异聚丁烯活性端基含量。其他烯键含量和相对分子质量的分析方法。成对t检验结果表明，近红外光谱分析方法测定结果与核磁和VPO方法测定结果之间无显著性差异。