NMR Studies of Mixed-Ligand Lanthanide Complexes in Solution: Pseudorotation and Ring Inversion of 18-Crown-6 Molecule in Cerium Subgroup Chelates

¹H and ¹³C NMR measurements are reported for the CDCl₃ and CD₂Cl₂ solutions of [La(NO₃)₃(18-crown-6)] (I), [Pr(NO₃)₃(18-crown-6)] (II) and [Ce(NO₃)₃(18-crown-6)] (III) complexes. Temperature dependencies of the ¹H NMR spectra of II have been analyzed using the dynamic NMR methods for multi-site exchange. Two types of conformational dynamic processes in II were identified (the first one with activation enthalpy ΔH ^‡=26 ± 4 kJ/mol is conditioned by interconversion of complex enantiomeric form and pseudorotation of macrocycle molecule upon the C ₂ symmetry axis, the second one with ΔH ^‡=46 ± 5 kJ/mol is conditioned by macrocycle molecule inversion). Studies of the values of the lanthanide-induced shifts revealed that the structure of complexes in solution is similar to that reported for the complex I in the crystal state.This revised version was published online in July 2005 with a corrected issue number.     

Synchrotron X-ray structures of cellulose I<Subscript>β</Subscript> and regenerated cellulose II at ambient temperature and 100 K

Synchrotron X-ray data have been collected to 1.4 Å resolution at the NE-CAT beam-line at the Advanced Photon Source from fibers of cellulose I_β and regenerated cellulose II (Fortisan) at ambient temperature and at 100 K in order to understand the effects of low temperature on cellulose more thoroughly. Crystal structures have been determined at each temperature. The unit cell of regenerated cellulose II contracted, with decreasing temperature, by 0.25%, 0.22% and 0.1% along the a, b, and c axes, respectively, whereas that of cellulose I_β contracted only in the direction of the a axis, by 0.9%. The value of 4.6×10^?5 K^?1 for the thermal expansion coefficient of cellulose I_β in the a axis direction can be explained by simple harmonic molecular oscillations and the lack of hydrogen-bonding in this direction. The molecular conformations of each allomorph are essential unchanged by cooling to 100 K. The room temperature crystal structure of regenerated cellulose II is essentially identical to the crystal structure of mercerized cellulose II.     

Redox-iodometry: a new potentiometric method

A new iodometric method for quantifying aqueous solutions of iodide-oxidizing and iodine-reducing substances, as well as plain iodine/iodide solutions, is presented. It is based on the redox potential of said solutions after reaction with iodide (or iodine) of known initial concentration. Calibration of the system and calculations of unknown concentrations was performed on the basis of developed algorithms and simple GWBASIC-programs. The method is distinguished by a short analysis time (2–3 min) and a simple instrumentation consisting of pH/mV meter, platinum and reference electrodes. In general the feasible concentration range encompasses 0.1 to 10^–6 mol/L, although it goes down to 10^–8 mol/L (0.001 mg Cl₂/L) for oxidants like active chlorine compounds. The calculated imprecision and inaccuracy of the method were found to be 0.4–0.9% and 0.3–0.8%, respectively, resulting in a total error of 0.5–1.2%. Based on the experiments, average imprecisions of 1.0–1.5% at c(Ox)>10^–5 M, 1.5–3% at 10^–5 to 10^–7 M, and 4–7% at <10^–7 M were found. Redox-iodometry is a simple, precise, and time-saving substitute for the more laborious and expensive iodometric titration method, which, like other well-established colorimetric procedures, is clearly outbalanced at low concentrations; this underlines the practical importance of redox-iodometry.

---

An erratum to this article is available at .     

A novel type of Si-containing poly(urethane-imide)s: synthesis, characterization and electrical properties

A novel type of a Si-containing poly(urethane-imide) (PUI) was prepared by two different methods. In the first method, Si-containing polyurethane (PU) prepolymer having isocyanate end groups was prepared by the reaction of diphenylsilanediol (DSiD) and toluene diisocyanate (TDI). Subsequently the PU prepolymer was reacted with pyromellitic dianhydride (PMDA) or benzophenonetetracarboxylic dianhydride (BTDA) in N-methyl pyrolidone (NMP) to form Si-containing modified polyimide directly. In the second method, PU prepolymer was reacted with diaminodiphenylether (DDE) or diaminodiphenylsulfone (DDS) in order to prepare an amine telechelic PU prepolymer. Finally, the PU prepolymer having diamine end groups was reacted with PMDA or BTDA to form a Si-containing modified polyimide. Cast films prepared by second method were thermally treated at 160 °C to give a series of clear, transparent PUI films. Thermogravimetric analysis indicated that the thermal degradation of PUI starts at 265 °C which is higher than degradation temperature of conventional PU, confirming that the introduction of imide groups improved the thermal stability of PU.To characterize the modified polyimides and their films, TGA, FTIR, SEM and inherent viscosity analyses were carried out. The dielectrical properties were investigated by the frequency-capacitance method. Dielectric constant, dielectric breakdown strength, moisture uptake and solubility properties of the films were also investigated.     

Enzyme stabilization strategies based on electrolytes and polyelectrolytes for biosensor applications

The achievements in the area of enzyme stabilization based on electrolytes, polyelectrolytes and polyols is reviewed, in the context of biosensor applications. Both the storage and operational stabilities of the biosensors can be improved using these stabilizers. The deactivation of the enzymes used for the development of biosensors from thermal shock, proteolytic degradation, and non-specific metal-catalyzed oxidation can be drastically reduced with the use of one or more of these stabilizers. It is attempted to deconvolute the effect of these additives on (a) the storage stability or shelf life, and (b) the operational stabilities of the biosensors. Even though there are a large number of techniques and reports dealing with enzyme stabilization, their application to biosensor technology is still very limited. It is thus concluded that the use of the existing enzyme stabilization techniques will have a drastic effect on the storage and operational stabilities of biosensors in the near future.     

Derivatisation in gas chromatographic determination of acidic herbicides in aqueous environmental samples

This paper reviews derivatisation processes applied in chromatographic determination of acidic herbicides (with carboxyl and phenol groups), mainly in aqueous environmental samples. The discussion focuses on the basic derivatisation reactions used to convert herbicides to derivatives to make them analysable by gas chromatography, and possibly to reduce detection limits and/or increase extraction recovery from aqueous samples. The reactions are transesterification, esterification, silylation, alkylation, and extractive and pyrolytic alkylation. The reagents used to conduct the reactions are numerous. Diazomethane is a very efficient methylation reagent but explosive and toxic. Methyl iodide also ensures rapid and efficient methylation. Benzyl bromide can be used directly in water but derivatisation yield is low and reproducibility is poor. Butyl chloroformate and dimethyl sulfite can also be used for derivatisation in water, and acetic anhydride can be used for in-situ derivatisation of phenolic herbicides. For increasing selectivity of GC detection pentafluorobenzyl bromide (for ECD) and (2-cyanethyl)dimethyl(diethylamino)silane (for NPD) have been applied. Very characteristic ions are produced in mass spectra if silyl groups are introduced, e.g. by using bis(trimethylsilyl)trifluoroacetamide. Tetramethylammonium, trimethylphenylammonium, tetraalkylammonium, and trimethylsulfonium hydroxides and salts can by used for derivatisation at elevated temperature in the GC injection port. Extractive alkylation is relatively efficient if tetraalkylammonium salts with long chain alkyl groups are used.     

CAST/CNMR: highly accurate C NMR chemical shift prediction system considering stereochemistry

Accurate, practical prediction of ¹³C NMR chemical shifts has been achieved with a new system, CAST/CNMR, taking account of stereochemistry. The CAST/CNMR system has solved the critical problem of the accurate distinction of differences and similarities in stereochemical structures around a specific carbon, which has not yet been achieved by any other database-oriented system for prediction of ¹³C NMR chemical shifts. CAST/CNMR uses a three-dimensional structural database together with a ¹³C NMR spectral database. Absolute/relative configurational and conformational structural information are described by the CAST (CAnonical-representation of STereochemistry) coding method. This paper provides an overview of the CAST/CNMR system, and describes its application to two natural products as examples.     

Synthesis and photoluminescence properties of BF2 complexes with 1,3-diketone ligands

BF₂ complexes with 1,3-diketone ligands were synthesized, and their optical and electrochemical properties were studied. The colors of the complexes varied depending on the structures of the 1,3-diketone ligands. The absorption and emission maxima of the complexes with 1,3-diaryl-1,3-diketone ligands were considerably red shifted as compared to those of the complexes with 1-aryl-3-trifluoromethyl-1,3-diketone ligands, suggesting an extended π-conjugation of the 1,3-diaryl-1,3-diketone moieties. The molar absorption coefficients and quantum yields of the complexes with 1,3-diaryl-1,3-diketone ligands were larger than those of the complexes with 1-aryl-3-trifluoromethyl-1,3-diketone ligands. Cyclic voltammetry measurements revealed that the reduction potentials of the BF₂ complexes were higher than those of the free ligands. These complexes exhibited various emission colors in the solid states due to the intermolecular interactions.     

Radical copolymerization of proto-hemin dimethyl ester

Iron(III) proto-porphyrin IX dimethyl ester (HDME) can copolymerize with π-conjugated monomers binding at one end of the polymer chain. Apparent Q, e values of HDME were Q = 70 and e = ?0.17. The copolymerization of HDME with π-unconjugated monomer was feasible by using π-conjugated monomer as a third component. When unconjugated vinylimidazoles were used as monomers, the obtained ternary copolymers of HDME formed intramacromolecular complexes of iron(II) porphyrin with vinylimidazole residues, which gave stable carbon monoxide adducts.     

Determination of chlorite in drinking water by differential pulse voltammetry on graphite

The chlorite ion is an unavoidable by-product of the disinfection of drinking water by means of chlorine dioxide. The maximum concentration values of chlorite accepted in many countries regulations range from 0.2 to 1.0 mg L^–1. A simple, inexpensive and quickly set up voltammetric procedure for the on-site determination of chlorite in drinking water networks is described. This procedure is suitable for the whole range of applications in drinking water plants. A useful cell for on-field analysis has been developed. Surface morphology and behaviour of carbon-based working electrodes have been investigated by voltammetry and atomic force microscopy (AFM). Actual samples of different types of water networks have been analysed for chlorite concentration.