Amine‐cured epoxy/clay nanocomposites. II. The effect of the nanoclay aspect ratio

The thermophysical and mechanical properties of a nanocomposite material composed of amine‐cured diglycidyl ether of bisphenol A (DGEBA) reinforced with organomontmorillonite clay are reported. The storage modulus at 100 °C, which was above the glass‐transition temperature (T_g), increased approximately 350% with the addition of 10 wt % (6.0 vol %) of clay. Below the T_g, the storage modulus at 30 °C increased 50% relative to the value of unfilled epoxy. It was determined that the T_g linearly increased as a function of clay volume percent. The tensile modulus of epoxy at room temperature increased approximately 50% with the addition of 10 wt % of clay. The reinforcing effect of the organoclay nanoplatelets is discussed with respect to the Tandon–Weng and Halpin–Tsai models. A pseudoinclusion model is proposed to describe the behavior of randomly oriented, uniformly dispersed platelets in nanocomposite materials. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4391–4400, 2004     

2‐connected 7‐coverings of 3‐connected graphs on surfaces

An m‐covering of a graph G is a spanning subgraph of G with maximum degree at most m. In this paper, we shall show that every 3‐connected graph on a surface with Euler genus k ≥ 2 with sufficiently large representativity has a 2‐connected 7‐covering with at most 6k ? 12 vertices of degree 7. We also construct, for every surface F² with Euler genus k ≥ 2, a 3‐connected graph G on F² with arbitrarily large representativity each of whose 2‐connected 7‐coverings contains at least 6k ? 12 vertices of degree 7. © 2003 Wiley Periodicals, Inc. J Graph Theory 43: 26–36, 2003     

Voltammetry at partially covered electrodes: Part I. Chronopotentiometry and chronoamperometry at model electrodes

Equations for chronopotentiometry and chronoamperometry at partially covered electrodes have been derived using a model of hexagonal array of cylidrical spaces terminated, at the electrode surface, by concentric active and inactive regions. The boundary value problem was shown to be analogous to that for a charge transfer preceded by a chemical reaction. Experiments with the reduction of ferricyanide on gold model electrodes partially covered with photoresist layer showed excellent agreement with the theory. Application of the equations to estimation of coverage and size of active sites distributed on a electrode surface is discussed.     

A gravimetric method for the determination of oxygen in uranium oxides and ternary uranium oxides by addition of alkaline earth compounds

A simple gravimetric determination of oxygen in uranium oxides and ternary uranium oxides is described. In alkaline earth uranates which are formed by heating in air at 800–1100°C, uranium is in the hexavalent state over certain continuous ranges of alkaline earth-to-uranium ratios. Thus, if an alkaline earth uranate or a compound containing an alkaline earth element, e.g. MgO, is mixed with the oxide sample and heated in air under suitable conditions, oxygen can be determined from the weight change before and after the reaction. The standard deviation of the O:U ratio for a UO_2+x test sample is ±0.0008–0.001, if a correction is applied for atmospheric moisture absorbed during mixing.     

Hydrodynamic voltammetry at channel electrodes: Part II. Theory of first-order kinetic collection efficiencies

The theory of first-order kinetic collection efficiencies at the double channel electrode is developed for the following two schemes: (I) A±n₁e→B (at the generator electrode), B→^kP (in solution), B±n₂e→Y (at the detector electrode), (II) A±n₁e→B, B→^kA, B±n₂e→Y. The exact expressions for the kinetic collection efficiencies are obtained as ascending and asymptotic series with respect to the kinetic parameter. Further, approximate formulae in exponential forms are given, which hold within an error of about 2% for conventional electrode geometry. Finally, the validity of the approximate procedure, which has been used previously to obtain the kinetic collection efficiencies for fast homogeneous reactions, is discussed in comparison with the present theory.     

Aromatic Radical Anions with Parallel or Crossed Triple Bonds

Proton hyperfine data are reported for the radical anions of 1,8-di (propyn-1-yl)-naphthalene (I), 7,8,12,13-tetradehydro-10,11-dihydro-9H-cyclodeca[d,e]naphthalene (II) and 2,2′-di(propyn-1-yl)-biphenyl (III), as well as of 5,6,11,12-tetradehydro-7,8,9,10-tetrahydro-dibenzo[a,c]cyclodecene (IV) and its 8,8,9,9-tetradeuterio-derivative (IV-d₄). The triple bonds in I and II can be regarded as roughly parallel, while those in IV (and IV-d₄) may be considered as crossed. The π-spin distributions in I? to IV? are discussed in terms of simple MO models which suggest a weekly bonding interaction between the acetylenic fragments in IV?, in contrast to III? where such an effect appears to be negligible. The importance of an analogous interaction in I? and II? is difficult to deduce, since its inclusion into a MO model does not substantially affect the π-spin distribution in these radical anions.     

Voltammetry at partially covered electrodes: Part III. Faradaic impedance measurements at model electrodes

Faradaic, impedances at model electrodes partially covered with a photoresist layer have been studied theoretically and experimentally. Equations for the faradaic impedance are derived based on the theoretical model and approach described in Part I of this series of papers. Experimental data for the hexacyanoferrate system at various model electrodes give excellent agreement, with theoretical predictions for the diffusion impedance behavior, and the applicability of the derived equations to the estimation of the degree of coverage and the size of the active regions is confirmed. Furthermore, the application of such model electrodes to the kinetic study of electrode reactions with high heterogeneous charge transfer rates is suggested.     

The reaction of isocyanide—mercuric chloride complexes with amines. Preparation of guanidines

Isocyanide—mercuric chloride complexes react readily with an excess of primary and secondary amines to give guanidines and metallic mercury in high yields through a redox decomposition reaction. In the presence of triethylamine, isocyanide—mercuric chloride complexes react with an equimolar amount of a primary amine to give a carbodiimide and metallic mercury. An intermediate organomercuric compound was isolated in the reaction of the isocyanide—mercuric chloride complex with pyrrolidone.     

Biological activities of chemically synthesized derivatives of lipid A: tetraacetyl-monosaccharides linked to 2,3-acyloxyacylglucosamine-4-phosphate

The mitogenicity and lethal toxicity of chemically synthesized lipid A analogs, in which 2,3-acyloxyacylglucosamine-4-phosphate (acyl-GlcN-4P) is linked to a tetraacetyl (Ac4)-monosaccharide, i.e., Ac4-glucose (A-211), Ac4-mannose (A-212), Ac4-galactose (A-213) or Ac4-glucosamine (A-214), were compared with those of tetraacetyl-3-deoxy-D-manno-2-octulosonic acid (Ac4-KDO) linked to acyl-GlcN-4P (A-203). All the compounds were capable of increasing incorporation of 3H-thymidine into splenocytes of C57BL/6 mice at doses of 50 and 100 micrograms/ml, but the mitogenic activity of A-203 at these doses seems to be stronger than those of the analogs. Intravenous injection of A-203, A-211, and A-213 did not exhibit lethal toxicity even at a high dose (50 micrograms/mouse) in C57BL/6 mice loaded with D-galactosamine hydrochloride. However, A-212 and A-214 showed lethality at the doses of 10 and 50 micrograms/mouse, respectively. The findings indicate that the biological activity of these compounds is affected by the kind of monosaccharide linked to acyl-GlcN-4P.