Estimation of frequency- and time-dependence of polymer composite system by viscoelasticity in three dimensions

This paper is concerned with the comparison between mechanical properties of polymer composite system and those of each individual constituent. The comparison is mainly performed with respect to the viscoelastic Young's modulus and the relaxation Young's modulus. These mechanical constants may be obtained from the correspondence principle by applying the Laplace transform to the constitutive equation. The calculated results exhibit that the mechanical property of polymer composite system strongly depends on that of matrix with respect to frequency- and time-dependences. That is, as for the vibration and dynamic response in the steady state, the frequency-dependence of peak position about imaginary part of dynamic modulus of composite system is similar to that of matrix, while the magnitude of dynamic modulus depends on volume fraction of dispersed particles to total volume. As for the stress relaxation, the time-dependence of the relaxation Young's modulus of composite system resemble that of matrix each other, while the magnitude depends on the volume fraction of dispersed particles to total volume. This is due to the calculating condition that particle is assumed to be very rigid in comparison with matrix in this paper.     

Synthesis of sodium-polystyrenesulfonate-grafted nanoparticles by core-cross-linking of block copolymer micelles

Sodium poly(styrenesulfonate)(polySSNa)-grafted polymer nanoparticles were synthesized by core-cross-linking of block copolymer micelles and subsequent chemical transformation. Block copolymers, poly(p-((1-methyl)silacyclobutyl)styrene-block-poly(neopentyl p-styrenesulfonate)s, polySBS-b-polySSPen, were synthesized by nitroxy-mediated living radical polymerization. The block copolymers formed micelles (R_h=15-23 nm, where R_h represents the hydrodynamic radius) with a polySBS core and polySSPen shell in acetone. The micelle core was cross-linked by ring-opening polymerization of silacyclobutyl groups in polySBS. Hydrolysis of the neopentyl groups provided polySSNa-grafted nanoparticles. The R_h of the particles before the hydrolysis ranged from 12 to 21 nm in acetone, while they varied to the range from 50 to 110 nm in water after the hydrolysis.     

Effect of molecular orientation distribution and crystallinity on the measurement of the crystal lattice modulus of nylon 6 by x-ray diffraction

The crystal lattice modulus of nylon 6 (-type) was measured by x-ray diffraction using nylon 6 films drawn up to five times. The measured crystal lattice modulus was 173–175 GPa for all specimens whose crystallinity and the Young's modulus were beyond 46% and 3.75 GPa, respectively. These results indicate that a state of homogenous stress can be achieved. In contrast, the values were scattered for the speciments whose crystallinity and Young's modulus are less than the above values. To study the origin, a numerical calculation of the crystal lattice modulus, as measured by x-ray diffraction, was carried out by considering effects on the orientation factors of molecular chains and crystallinity. In this calculation, a previously introduced model was employed, in which oriented crystalline layers are surrounded by oriented amorphous phases so that the strains of the two phases at the boundary are identical. The theoretical results calculated by the introduced model indicated that the crystal lattice modulus by x-ray diffraction is almost equal to the intrinsic crystal modulus if the morphology of the test specimen can be represented as a series model. In contrast, if a parallel model is more appropriate, the difference between the measured modulus and the intrinsic value can be pronounced. Such morphological dependence was found to be less pronounced with increasing high degree of molecular orientation and crystallinity.     

Recent developments on creation of artificial metalloenzymes

Organic synthesis using biocatalysts has been developed over many years and is still a prominent area of research. In this context, various hybrid biocatalysts composed of a synthetic metal complex catalyst and a protein scaffold (i.e. “artificial metalloenzymes”) have been constructed. One of the most recent research areas in biocatalysts-mediated synthesis is CC bond/cleavage, the most important type of reaction in organic chemistry. Some of the artificial enzymes were applied to in-cell reactions as well as in vitro systems. The effects of the structural fluctuation in biomacromolecules on their functions have also been realized. This review article includes recent research examples of artificial metalloenzymes used to CC bond formation/cleavage. As a perspective, we also focus on how we apply protein dynamics factor for the creation of new generation artificial metalloenzymes.     

Synthesis of poly (ethylene oxide)-b-polysilane by anionic polymerization of masked disilenes using a macroinitiator method

Poly(ethylene oxide-)-poly(1, 1-dimethyl-2, 2-dihexyldisilene) block copolymers (PEO-b-PMHS) were synthesized by the anionic polymerization of masked disilenes initiated with the potassium alkoxide of poly(ethylene glycol). The block copolymer self-assembled into polymer micelles in water accompanied by a transition in the polysilane conformation.     

Adsorption of anions to zirconium(IV) and titanium(IV) chemically immobilized on gel-phase

Adsorption behaviors of 25 anions to zirconium(IV) and titanium(IV) chemically immobilized on a gel-phase were studied by ion chromatography and by batch adsorption experiments. The affinities of Zr(IV) to iminodiacetate as an anchoring group and to anions as a sample are much stronger than those of Ti(IV). On a Zr(IV) column, fourteen anions showed no retention, four anions showed pH-dependent retention in a low pH region, and seven anions were irreversibly adsorbed at pH <7. In the last group, fluoride was adsorbed both by the ligand exchange mechanism and the addition mechanism, while phosphate, arsenate and selenite were only by the ligand exchange mechanism. The structures of the adsorbed species are discussed.     

Morphology and electric conductivity of cross-linked polyethylene–carbon black blends prepared by gelation/ crystallization from solutions

 Ultra-high-molecular-weight polyethylene (UHMWPE) – carbon black (CB) blends were prepared by gelation/ crystallization from PE dilute solutions containing CB particles. The UHMWPE/CB composition chosen were 1/0.15, 1/0.25, 1/0.5, 1/0.75, 1/1, 1/3, 1/5, and 1/9, etc. The cross-linking of PE chains was performed by chemical reaction of dicumyl-peroxide at 160 ^°C. X-ray diffraction patterns indicate that the crystallinity of PE within the blends decreased drastically through the chemical reaction at high temperature. The sample preparation method by gelation/crystallization provided the UHMWPE–CB system with various CB contents up to 90% and the conductivities for the resultant specimens were in the range from 10^-9 to 1 Ω^-1 cm^-1 corresponding to the electric conductivity range of semiconductors. The blends assured thermal stability of electric conductivity by cross-linking of PE chains, although the mechanical property such as the storage and loss moduli were very sensitive to temperature. The conductivity of the blends with CB content ≥20% were almost independent of temperature up to 220 ^°C and the values in the heating and cooling processes were almost the same. On the other hand, for the UHMWPE–CB blends with 13% CB content corresponding to the critical one, temperature dependence of electric resistivity showed positive temperature coefficient (PTC) effect. The PTC intensities for non-cross-linked and cross-linked materials were lower than that of the corresponding low-molecular-weight-polyethylene (LMWPE)–CB blend but the maximum peak appeared at 160 ^°C which is higher than the peak temperature of LMWPE–CB blend. Received: 10 December 1997 Accepted: 9 April 1998     

First chemical synthesis of triglucosylated tetradecasaccharide (Glc3Man9GlcNAc2), a common precursor of asparagine-linked oligosaccharides

Triglucosylated high-mannose-type tetradecasaccharide (Glc₃Man₉GlcNAc₂), the oligosaccharide part of the donor substrate of oligosaccharyl transferase (OST) complex, and diglucosylated tridecasaccharide (Glc₂Man₉GlcNAc₂) were synthesized. These oligosaccharides were assembled in a convergent and stereoselective manner. Undecasaccharide 5 was employed as the common intermediate, and coupling with trisaccharide (4) and disaccharide (3) donor afforded fully protected tetradeca-(17) and tridecasaccharide (16), respectively. These oligosaccharides were deprotected to give Glc₃Man₉GlcNAc₂ and Glc₂Man₉GlcNAc₂, respectively.     

Radical alkenylation of alpha-halo carbonyl compounds with alkenylindiums

Alkenylation reaction of alpha-halo carbonyl compounds with alkenylindiums proceeded via a radical process in the presence of triethylborane. Unactivated alkene moieties as well as a styryl group could be introduced by this method. The geometry of the carbon-carbon double bonds of the alkenylindiums was retained. Preparation of an alkenylindium via a hydroindation of 1-alkyne followed by radical alkenylation established an efficient one-pot strategy. [reaction: see text]