RF and field measurements of the SSC-LINAC RFQ

The 53.667 MHz continuous-wave heavy ion RFQ has been designed and manufactured for the SSC-LINAC project.This four-rod RFQ accelerates ions with maximum mass to charge ratio of 7 from 3.728 keV/u to 143 keV/u.Measurements have been carried out to check the RF performance of the cavity and the quality of the electric field.The S11 of the power coupler is adjusted to better than-44 dB,and the Q0 of the cavity is 6440.The quality of the electric field is evaluated by the perturbation method.The measurement procedure and data analysis will be discussed in detail.The error due to gravity of the perturbation bead has been corrected by averaging the fields in different quadrants.As a result,the unflatness of the electric field is±2.5%,and the dipole field component distributes from 0%to 20%in different longitudinal positions,which indicates the asymmetry of the quadrupole field.The unflatness of the quadrupole field distribution represents a good agreement with the simulation results.High power RF test and beam commissioning of the RFQ are on schedule in early 2014.     

板条Nd:YAG晶体的合成盘抛光技术

针对高功率板条激光器核心工作器件——板条Nd:YAG晶体的超精密加工开展研究,分析了具有特殊构型的板条Nd:YAG晶体元件的加工性能及工艺难点,提出了一种新的基于合成盘抛光的板条Nd:YAG晶体加工工艺,并对规格为100mm×30mm×3mm的板条Nd:YAG晶体进行了加工实验。实验结果表明,合成盘抛光可以很好地控制元件的塌边现象;通过磨料的优化选择,在合成盘抛光工艺中匹配合适粒度的Al2O3磨料能够实现元件的低缺陷加工,元件下盘后的全反射面平面度达0.217λ(1λ=632.8nm),端面平面度达到0.06λ,表面粗糙度达0.55nm(RMS),端面楔角精度可达2″。     

动态调整出水温度的高效制冷方法研究

通过数学方法较为精确地建立了吸收式制冷机需满足负荷要求的数学模型,确立了蒸发器冷冻水出口温度与室外温度之间的关系式。进而建立了吸收式出水温度控制系统的动态特性模型,并采用并联程序法对水温控制系统进行仿真。     

核类似铜酸盐超导模型的su_s(1,1)su_d(1,1)代数结构

由Iachello提出的核类似铜酸盐超导模型具有su(3)代数结构,其平均场近似下的Hamilton量可以写成su(3)生成元的线性组合.通过代数生成元的实现,该模型约化的Hamilton量具有Su_s(1,1)SU_d(1,1)代数结构,利用相干算子U(θ,φ)的幺正变换,可得到系统约化Hamilton量的能隙方程及本征值,发现应用不同代数结构求解会得到不同侧重点的分析结果.     

Coherent incoherent transition in the spin boson model with a super-ohmic bath

The temperature effect on tunnelling splitting in the spin--boson model with a super-ohmic bath is studied by the small polaron theory. The coherent--incoherent transition temperature is calculated and its dependence on dissipation strength and bare tunnelling splitting is analysed. In additional to the traditional transition point described in textbooks, a new kind of transition is found in the low dissipation region, showing different temperature dependence in the transition. The relation to the corresponding transition in the polaron--phonon system is also discussed.     

近场宽带电场耦合天线的高频结构模拟器软件仿真及性能分析

近场宽带电场耦合天线是一种新型的短距离、高速无线通信天线,它是索尼公司力推的近距离高速无线通信技术——.Transferjet^TM的工作天线.使用高频结构模拟器软件,对一种典型的近场宽带电场耦合天线进行了参数化的结构设计;通过仿真模拟,分析短截线的线长和线宽,以及耦合电极的面积对天线中心频率和工作带宽的影响;分析了天线间的距离和夹角,以及耦合电极的面积,对天线传输损耗和性能的影响.设计了一个满足Transferjet^TM技术指标的小尺寸天线,给出了性能仿真结果.     

基于蒙特卡罗方法的α粒子细胞S值计算

在放射性免疫治疗以及硼中子俘获治疗（BNCT）等放射性治疗过程中,粒子通过与人体组织材料相互作用产生次级电子将能量传递给人体组织,放射性核素在细胞尺度分布的不均匀性将严重影响靶区剂量分布。为深入了解放射性核素在细胞中不同位置分布对靶区剂量影响,采用基于历史凝聚算法的Monte Carlo 工具包Geant4编写了细胞S值计算程序。计算了2种细胞尺寸,12种粒子能量,3种源分布方式的细胞S值,与医学内照射剂量（MIRD）委员会解析算法的计算结果进行对比,发现两者差异在1%以内。证明了Geant4在m尺度下细胞剂量计算的可行性,并对BNCT治疗过程中产生的粒子(1.47 MeV与1.78 MeV)的细胞S值进行计算。     

High-power ultraviolet 278 nm laser from fourth-harmonic generation of a Nd:YAG laser in CsB3O5

We demonstrate a high-power UV 278 nm laser by fourth-harmonic generation (FHG) of a 1112 nm Nd:YAG laser in a nonlinear optical (NLO) crystal CsB3O5 (CBO) for the first time, to our best knowledge. A 30 W level diode-pumped Q-switched Nd:YAG laser at 1112 nm with beam quality factor M2=1.2 was used as the fundamental light source at a pulse width of 500 ns. With an LiB3O5 crystal, the 1112 nm laser was first frequency-doubled to 556 nm with an average output power of 13.5 W. It was then frequency doubled again in a CBO crystal to obtain the FHG output at 278 nm. The maximum average output power of the 278 nm laser is up to 1.5 W. The results demonstrated that CBO crystal is a promising NLO material for UV high-power lasers below 300 nm.     

Electron conductance and mode stability in multi-gap coupled cavity m

根据空间电荷波小信号基础理论,建立了多间隙耦合腔中单个间隙电子电导的计算模型与模式稳定性分析模型.以3间隙耦合腔为例,推导出了各个间隙电子电导的计算公式.通过理论计算与仿真模拟,研究了3间隙耦合腔中各个模式的电子电导特性,并进行了间隙中注波互作用研究与模式稳定性分析.模型计算发现:各个间隙不同模式的电子电导不同,第3间隙内电子电导受注电压及间隙距离影响最大,对整个间隙内的注波互作用及电路稳定性的影响也最大.该模型还可以用于分布作用速调管注波互作用的计算模拟.