Modelling of a single drop impact onto liquid film using particle method

The process of single liquid drop impact on thin liquid surface is numerically simulated with moving particle semi‐implicit method. The mathematical model involves gravity, viscosity and surface tension. The model is validated by the simulation of the experimental cases. It is found that the dynamic processes after impact are sensitive to the liquid pool depth and the initial drop velocity. In the cases that the initial drop velocity is low, the drop will be merged with the liquid pool and no big splash is seen. If the initial drop velocity is high enough, the dynamic process depends on the liquid depth. If the liquid film is very thin, a bowl‐shaped thin crown is formed immediately after the impact. The total crown subsequently expands outward and breaks into many tiny droplets. When the thickness of the liquid film increases, the direction of the liquid crown becomes normal to the surface and the crown propagates outward. It is also found that the radius of the crown is described by a square function of time: r_C = [c(t ? t₀)]^0.5. When the liquid film is thick enough, a crown and a deep cavity inside it are formed shortly after the impact. The bottom of the cavity is initially oblate and then the base grows downward to form a sharp corner and subsequently the corner moves downward. Copyright © 2004 John Wiley & Sons, Ltd.     

Photorefractive Four-Wave Mixing Switches Utilizing Pockels Effect -Longitudinal and Lateral Switches-

We carried out detailed calculations for photorefractive wave-mixing switches based on one of three crystals with high electro-optic coefficients, namely, BaTiO₃, Strontium Barium Niobate (SBN (0.75)), and Potasium Sodium Strontium Barium Niobate (KNSBN). A comparison of results for the three crystals shows that a 0_-cut BaTiO³ crystal is suitable for a longitudinal switch and requires a voltage of about 80 for a 2-mm-thick crystal to induce sufficient phase mismatch. The electrodes must be transparent for the incident and diffracted beams. A 45_-cut SBN (0.75) crystal, however, is suitable for a lateral switch and requires a voltage of about 150 for a 1-mm-wide crystal. The electrodes do not need to be transparent.     

Aging of concrete buildings and determining the pH value on the surface of concrete by using a handy semi-conductive pH meter.

A new method was devised for measuring the pH of a concrete surface by pHBOY-P2 with a piece of filter paper by extracting the pH value from concrete. This is a simple and inexpensive method that does not damage the concrete building, and is easy to apply on concrete samples for monitoring. By using the method mentioned above, a drastic decrease of the pH value of concrete bridges and buildings has investigated. The method is environmentally friendly to detect the pH value change of concrete as an environmental sample investigation.     

(Nd_(1-x)Er_x)_2Co_(15.5)V_(1.5)的结构转变与磁性

利用电弧熔炼制备了 (Nd1 xErx) 2 Co1 5 5V1 5(x=0— 1 0 )化合物样品 .通过x射线衍射分析和磁性测量研究了Er替代Nd2 Co1 5 5V1 5中的Nd时对化合物结构和磁性的影响 .研究结果表明 ,低Er含量 (x <0 4 ) ,化合物为Th2 Zn1 7型结构 ;高Er含量时 (x >0 5 ) ,化合物转变为Th2 Ni1 7结构 ;Er含量为x =0 4和 0 5时 ,两种结构共存 .两种结构的晶胞参数a ,c和晶胞体积V随着Er含量的增加都呈现递减的趋势 .随着Er含量的增加 ,(Nd1 xErx) 2 Co1 5 5V1 5化合物的居里温度和饱和磁化强度都单调下降 .(Nd1 xErx) 2 Co1 5 5V1 5化合物的室温各向异性由低Er含量时的易锥型转变为高Er含量时的易轴型 .x =0— 0 5的化合物在温度升高时发生自旋重取向转变 ,自旋重取向温度Tsr随Er含量的增加而减小     

晶格失配对异质外延超薄膜生长中成核特性的影响

利用动力学蒙特卡罗方法模拟了异质外延超薄膜生长中的成核过程.研究了薄膜与衬底的晶格失配对超薄膜生长中成核密度、平均核尺寸、标度关系及生长模式的影响.结果发现产生压（张）应变的晶格负（正）失配使生长过程更早（迟）从成核区进入过渡区，失配越大，这一效应越明显.在相同的沉积条件下，负失配导致超薄膜形成较低的成核密度与较大的平均核尺寸，而正失配则相反.成核密度满足标度关系Ns≈(F/D)χ，随着失配度从-0.04增加到0.02，标度系数χ从0.37逐渐减小到0.33，对应超薄膜生长过程从包含二聚体扩散模式转变到无 关键词： 薄膜生长 成核 晶格失配 蒙特卡罗模拟     

ON A SET OF h-HARMONIC HOMOGENEOUS POLYNOMIALS

1　IntroductionLet Sd- 1 bethe unitsphere of Rd,Πdthe space of allpolynomialsofd variables,and x(i)= (x1 ,… ,xi) (i=1 ,… ,d) .In this paper,we are concerned with the homogeneous polyno-mials orthogonal with the weightfunction h(x(d) ) =x2 k11 …x2 kdd on Sd- 1 ,where ki≥ 0 (i=1 ,… ,d) .Connected with the weightfunction h(x(d) ) are the following differential-differenceoperators introduced by Charles F. Dunkl in [3 ] ,Dip(x(d) ) = p(x(d) ) xi+ di=1kip(x(d) ) -p(x1 ,… ,-xi,… ,xd)xi,Δ…     

有效二能级原子与压缩相干光场相互作用过程中场熵的特性

本文研究了包括Stark效应时,双光子Jaynes-Cummings模型与单模压缩相干光场发生相互作用过程中场熵的特性,讨论了Stark移动参数、光场参数对场墒演化的影响.     

KDP晶体三倍频实验和分析

报道了ＫＤＰ晶体中的三倍频产生的实验研究，计算了比较了直接三倍频过程和级联过程对ＫＤＰ晶体三阶有效非线性系数的贡献，并探讨了ＫＤＰ作为非线性晶体材料三阶非线性系数测量基准的可行性。     

一种漂移室定位子性能反常现象的研究

研究了一种漂移室定位子性能的反常现象,它关系到定位子的使用寿命．着重测量了暗电流和随机噪声与时间、高压及温度的关系.     

湍流边界层外区大尺度相干结构的理论模型及与实验的比较

本文基于流动稳定性理论,提出了一种解释湍流边界层外区大尺度相干结构产生机理的理论模型.将计算所得流线、等涡线分布及利用相干结构理论模型计算湍流边界层中平均温度分布的结果与实验比较,结果是比较满意的.