横向划痕对光场调制的近场模拟

熔石英亚表面划痕对入射激光的近场调制是导致光学元件低阈值损伤的主要因素之一. 用三维时域有限差分方法研究了连续横向划痕的近场分布, 对比了尖锐截面与光滑截面场调制的差异, 着重探讨了光场调制与划痕宽深比R的关系. 研究表明: 酸蚀后的光滑截面有助于减弱近场调制, 这类划痕的R>10.0时调制较弱且相互接近, R<5.0时调制显著增强. 当R取1---3时, 亚表面的调制达最大值, 最大电场幅值为入射波幅值的4.3倍. 当R取1.0---3.5时, 缺陷附近有80%以上取样点的最大电场幅值超过入射波幅值的2倍. 随着深度的增大, 强场区具有明显的"趋肤效应": 位于划痕正下方的强场区首先往左右两侧移动, 然后移向抛物口界面以及水平界面, 同时衍生出的多条增强线诱导整个亚表面层的光场增强.     

Evolution of emergent C-points, L-lines, and C-lines in free space

Polarization singularities,which emerge from the incoherent superposition of two vector electric fields with the same frequency,and their evolution in free space are studied analytically and illustrated by numerical examples.It is shown that there exist C-points,L-lines,in particular,C-lines in incoherently superimposed two-dimensional wavefields.Usually,the C-lines are unstable and disappear during the free-space propagation.The motion,pair creation-annihilation process of the emergent C-points,as well as the distortion of the L-lines may take place,and the degree of polarization of the emergent C-points varies upon propagation and may be less than 1.     

The stability of a non-extensive relativistic Fermi system

Based on the statistical theory of non-extensive relativity,and using theoretical analysis and numerical simulation,the non-extensive mechanical stability of ultra-relativistic free Fermi gas is investigated.The expressions of the stability conditions under high and low temperatures are given,and the mechanisms of the influences of temperature,ultrarelativistic effect,and non-extensive parameter q on stability are analysed.Our results show that at high temperature and under the condition of q < 1,the stability of a non-extensive system is weaker than that of an extensive system,and the relativistic effect reduces system stability as compared with a non-relativistic system.However,under the condition of q > 1,the stability of the non-extensive system is stronger than that of the extensive system,and the relativistic effect strengthens the system stability as compared with the non-relativistic system.In addition,under the condition of low temperature,the variation of the stability of the non-extensive system with temperature has a turning point.     

一种用于土壤非金属养分测试的光纤探头式分光光度计

针对测土配方施肥技术中要求快速、便捷、高效地进行土壤养分测试的需求,文章基于浸入式光纤探头、平场凹面全息光栅、二极管线阵检测器开发了一种光纤探头式分光光度计用于土壤养分中非金属元素的快速、准确测试。基于国家计量检定规程JJG 178—2007对紫外、可见、近红外分光光度计的性能检测方法测试的该仪器的波长最大允许误差与波长重复性、基线平直度、透射比最大允许误差与透射比重复性均达到了国标第Ⅲ级别标准,其最小光谱带宽、噪声与漂移、杂散光基本达到了国标第Ⅳ级别标准。基于该仪器测试的土壤硝态氮、铵态氮、有效磷、有效硫、有效硼、和有机质含量与基于商用的国产单光束和进口双光束分光光度计测试的结果呈极显著的线性相关关系,其回归方程的斜率接近于1,且对比数据之间无显著性差异。因此,该光纤探头式分光光度计可用于土壤非金属养分的快速、准确测试。     

CdS量子点的酿酒酵母仿生合成及光谱表征

以酿酒酵母为载体,常温下利用仿生法成功合成了CdS量子点。荧光发射光谱、紫外吸收光谱以及荧光显微镜照片证明,该方法合成的CdS量子点的荧光发射峰位置在443nm,在紫外灯下能发蓝绿色荧光。透射电子显微镜(TEM)表征结果表明,该仿生法合成的CdS量子点为六方纤锌矿结构。以荧光发射和紫外吸收光谱为性能指标,考察了酿酒酵母生长时期、Cd2+的反应浓度以及反应时间等条件对合成CdS量子点的影响。当酿酒酵母处于生长稳定期初期时,与浓度为0.5mmol.L-1的Cd2+共培养24h后所合成的CdS量子点荧光最强。实验中观察到,换液培养可有效提高酿酒酵母合成CdS量子点的产量。     

激光感生色散光学滤波理论

利用半经典理论，建立了激光感生色散光学滤波的理论模型.通过求解密度矩阵方程，得到 感生极化率.并利用该理论计算出钾694 nm激光感生色散光学滤波器的透射谱，与发表的实 验结果基本符合. 关键词： 激光感生色散光学滤波 透射谱 极化率     

一种新的单幅条纹图的相位解调方法

基于非载波条纹图的条纹灰度分布的极值准确定位,提出了一种新的由单幅条纹图解调相位方法.该方法首先准确定位每个条纹灰度的极值包括最大和最小,再基于极值图将条纹的强度值分布线性地变换到-1和1之间,最后利用arcos反余弦取代传统的atan2反正切算法求出相位,结合极值图就能快速准确地解调出含有封闭条纹的条纹图相位.本方法仅用一幅条纹图,不需要传统的条纹定级和对分数级条纹插值与拟合,自动判别条纹相位变化的波谷,准确获得条纹相位分布.这一方法使光测法研究动态和瞬态问题成为可能,而不需引入载波法调制条纹.文中通过实例说明了本方法的处理过程.     

微接触印刷法制造聚合物多层次准三维立体微结构

直接用聚合物稀溶液作为“印墨”进行微接触印刷,制作了诸如聚苯乙烯和聚甲基丙烯酸甲酯等聚合物的微细结构,通过重复交叉盖印得到多层次准三维立体微结构,并用可聚合的双(甲苯磺酸)-2,4-己二炔-1,6-二醇脂的丙酮稀溶液作微接触印刷,观察了微条纹上的聚合.对聚合物溶液的微接触印刷的过程中溶剂挥发等因素的影响进行了观察分析,结果表明,溶剂挥发时间对微图形的准确复制是十分重要的,过长或过短的溶剂挥发时间都不利于得到清晰精确的微结构.     

Facile Construction of 3D Reduced Graphene Oxide Wrapped Ni3S2 Nanoparticles on Ni Foam for High‐Performance Asymmetric Supercapacitor Electrodes

3D reduced graphene oxide (rGO)‐wrapped Ni₃S₂ nanoparticles on Ni foam with porous structure is successfully synthesized via a facile one‐step solvothermal method. This unique structure and the positive synergistic effect between Ni₃S₂ nanoparticles and graphene can greatly improve the electrochemical performance of the NF@rGO/Ni₃S₂ composite. Detailed electrochemical measurements show that the NF@rGO/Ni₃S₂ composite exhibits excellent supercapacitor performance with a high specific capacitance of 4048 mF cm^?2 (816.8 F g^?1) at a current density of 5 mA cm^?2 (0.98 A g^?1), as well as long cycling ability (93.8% capacitance retention after 6000 cycles at a current density of 25 mA cm^?2). A novel aqueous asymmetric supercapacitor is designed using the NF@rGO/Ni₃S₂ composite as positive electrode and nitrogen‐doped graphene as negative electrode. The assembled device displays an energy density of 32.6 W h kg^?1 at a power density of 399.8 W kg^?1, and maintains 16.7 W h kg^?1 at 8000.2 W kg^?1. This outstanding performance promotes the as‐prepared NF@rGO/Ni₃S₂ composite to be ideal electrode materials for supercapacitors.