N-Levulination of Guanosine

A procedure have been developed for the synthesis of the N-levulinoyl derivative of guanosine.     

A new affinity-HPLC packing for protein separation: Cibacron blue attached uniform porous poly(HEMA-<Emphasis Type="Italic">co</Emphasis>-EDM) beads

In this study, a new affinity high-performance liquid chromatography (HPLC) stationary phase suitable for protein separation was synthesized. In the first stage of the synthesis, uniform porous poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate), poly(HEMA-co-EDM), beads 6.2 μm in size were obtained. Homogeneous distribution of hydroxyl groups in the bead interior was confirmed by confocal laser scanning microscopy. The plain poly(HEMA-co-EDM) particles gave very low non-specific protein adsorption with albumin. The selected dye ligand Cibacron blue F3G-A (CB F3G-A) was covalently linked onto the beads via hydroxyl groups. In the batch experiments, albumin adsorption up to 60 mg BSA/g particles was obtained with the CB F3G-A carrying poly(HEMA-co-EDM) beads. The affinity-HPLC of selected proteins (albumin and lysozyme) was investigated in a 25 mm×4.0-mm inner diameter column packed with CB F3G-A carrying beads and both proteins were successfully resolved. By a single injection, 200 μg of protein was loaded and quantitatively eluted from the column. The protein recovery increased with increasing flow rate and salt concentration of the elution buffer and decreased with the increasing protein feed concentration. During the albumin elution, theoretical plate numbers up to 30,000 plates/m were achieved by increasing the salt concentration.     

Ru-catalyzed synthesis of substituted phthalides through C–H bond activation and functionalization

Synthesis of substituted phthalides through a ruthenium-catalyzed reaction of phthalic anhydrides with acrylates is described. The reaction proceeds via CH bond activation and leads to the formation of vinylated phthalides through a successive double vinylation accompanied by decarboxylation and annulation reactions.     

Catalytic Method for Synthesis of Aspirin by a Green,Efficient and Recyclable Solid Acid Catalyst (Preyssler's Anion) at Room Temperature

Synthesis of aspirin at room temperature via O‐acetylation of salicylic acid in the presence of Preyssler type heteropolyacids has been investigated in order to contribute toward clean technology, which is the most important need of the society. All of the catalysts are recyclable and reusable.     

Influence of hydrophobe content on the solution rheology of hydrophobically modified terpolymer of SO2, N,N-diallyl-N-carboethoxymethylammonium chloride

Rheological properties of hydrophobically modified copolymer of SO₂, N,N-diallyl-N-carboethoxymethylammonium chloride and the hydrophobic monomer N,N-diallyl-N-octadecylammonium chloride were studied. The influence of hydrophobe content (HP) and polymer concentration was investigated. Polymers with HP content in the range 1.5-5% were examined and the concentration was varied in the range 2-5 wt%. Both dynamic and steady-shear experiments were performed in ARES rheometer. Copolymers were observed to exhibit typical viscoelastic behavior even with low HP content. Both the dynamic viscosity, η′ and storage modulus, G′, increase with the increase of both the polymer concentration and the HP content of the system. The viscosity of the high HP content polymer showed a strong shear dependency, while G′ was a weak function of frequency and gel-like behavior was observed. The zero-shear viscosity, η₀, showed a strong concentration dependency (η₀ ∼ ?^α; 1.1 < α < 5.9). The concentration dependency of η₀ suggests that intermolecular association is dominant in the high HP content polymer. Control of the HP content and polymer concentration of this class of polymers can lead to a wide range of interesting rheological properties.     

Confirmation of eprinomectin, moxidectin, abamectin, doramectin, and ivermectin in beef liver by liquid chromatography/positive ion atmospheric pressure chemical ionization mass spectrometry

A liquid chromatographic (LC) multiresidue screening procedure was developed for determination of eprinomectin, moxidectin, abamectin, doramectin, and ivermectin in beef liver at 0, 25, 50, and 100 ppb levels. A procedure using low resolution LC/atmospheric pressure chemical ionization (APCI) mass spectrometry (MS) was developed with further purification steps added to the quantitative LC method to confirm residues. Acetonitrile extracts of liver, prior to derivatization for LC analysis, were further purified by using a C8 solid-phase extraction cartridge and an alumina-B cartridge. The purified extract was analyzed by injection into an LC/positive ion APCI MS. Identity of the compound was confirmed by comparison of its retention time and relative intensity data with those of a standard or recovery from a fortified control liver sample. Anthelmintic drugs in acetonitrile extracts of liver containing eprinomectin, moxidectin, abamectin, doramectin, and ivermectin at 25 ppb, the lowest level of fortification used in the LC determinative method, were successfully confirmed.     

Synthesis of trimethyl (2S,3R)- and (2R,3R)-[2-H1]-homocitrates and the corresponding dimethyl ester lactones—towards elucidating the stereochemistry of the reaction catalysed by homocitrate synthase and by the Nif-V protein

Trimethyl (2S,3R)- and (2R,3R)-[2-²H₁]-homocitrates, 10b and 10c respectively, and dimethyl (2S,3R)- and (2R,3R)-[2-²H₁]-homocitric lactones, 11b and 11c respectively, have been synthesised from shikimic acid and [2-²H]-shikimic acid by a route which defines the stereochemistry of the two chiral centres in each compound. The NMR spectra of these products will enable the stereochemistry of the biological reaction catalysed by homocitrate synthase and by the protein from the nifV gene to be elucidated.     

Mild and Efficient Deprotection of 1,3‐Dithianes with N,N′‐ Diiodo‐N,N′‐1,2‐Ethanediyl‐Bis(p‐Toluenesulphonamide)

Aliphatic and aromatic 1,3‐dithiane are oxidized to the corresponding carbonyl compounds in good yields under mild conditions by N,N′‐diiodo‐N,N′‐1,2‐ethanediyl‐bis(p‐toluenesulphonamide) [NIBTS] and silver nitrate.     

Reactions with heterocyclic amidines. VI. Synthesis and chemistry of pyrazol-5-yl,and 1,2,4-triazol-5-ylhydrazonyl chlorides

The 4-bromo-3-phenylpyrazol-5-ylhydrazonyl chlorides (Ia,b) and 1,2,4-triazol-5-ylhydrazonyl chlorides (IIa,b) were prepared via coupling of diazotized 4-bromo-3-phenyl-5-aminopyrazole (III) and 5-amino-1,2,4-triazole (IV) with α-chloro derivatives of acetylacetone and of ethyl aceto-acetate. Compounds Ia and IIa,b were utilised for the synthesis of several new heterocyclic derivatives.     

Conducting graft copolymers of poly(3‐methylthienyl methacrylate) with pyrrole and thiophene

A thiophene‐functionalized methacrylate monomer (3‐methylthienyl methacrylate) was synthesized via the esterification of 3‐thiophene methanol with methacryloyl chloride. The methacrylate monomer was polymerized by free‐radical polymerization in the presence of azobisisobutyronitrile as the initiator. Graft copolymers of poly(3‐methylthienyl methacrylate) (PMTM2) and polypyrrole and of PMTM2 and polythiophene were synthesized by constant‐potential electrolyses. p‐Toluene sulfonic acid, sodium dodecyl sulfate, and tetrabutylammonium tetrafluoroborate were used as the supporting electrolytes. PMTM2‐coated platinum electrodes were used as anodes in the polymerization of pyrrole and thiophene. Moreover, the oxidative polymerization of poly(3‐methylthienyl methacrylate) (PMTM1) was studied with FeCl₃ as the oxidant. The self‐polymerization of PMTM1 was also investigated by galvanostatic electrolysis both in dichloromethane and in propylene carbonate. The structures of PMTM1 and PMTM2 were investigated by several spectroscopic and thermal methods. The grafting process was elucidated with conductivity measurements, Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and scanning electron microscopy studies. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4131–4140, 2002