氧化羰化法合成碳酸甲乙酯热力学及催化性能的研究

研究了在甲醇、乙醇温和溶液中,氧化羰化一步合成不对称碳酸甲乙酯(MEC)反应。通过热力学计算考察了反应的可行性及程度。计算结果表明,在298.2K下主反应平衡常数为2.39×1080,说明此反应的可行性和程度均很大。实验发现在氧化羰化合成碳酸甲乙酯的过程中,不仅存在氧化羰化过程,同时也存在酯交换过程;含氮席夫碱(Schiff)的种类,甲醇和乙醇相对用量,反应温度和压力对碳酸甲乙酯(MEC)的合成均有影响。当以氯化亚铜(CuCl) 1,10 菲罗啉(phen) N 甲基咪唑(NMI)为催化剂时,摩尔比n(CuCl)∶n(NMI)∶n(phen)=1∶1.25∶1.25,在393K,2.4MPa,VMeOH∶VEtOH=2∶8,CuCl浓度为0.20mol L的条件下,反应2h,甲醇的转化率为44.3%,乙醇的转化率为22.3%,MEC产率为10.4%。与单纯CuCl催化剂相比,甲醇和乙醇的转化率分别提高17倍和9倍,MEC产率提高74倍。对氧化羰化反应机理也进行了探讨。     

咪唑类化合物-CuCl络合催化剂在甲醇氧化羰基化反应中的催化性能

研究了咪唑及其衍生物配合CuCl对甲醇液相氧化羰化合成碳酸二甲酯的催化性能。筛选出溶解性好、腐蚀性小且催化活性高的多功能助催剂。实验结果表明，反应体系中加入N-甲基咪唑后，CuCl可以完全溶解。当催化剂的浓度为0.2 mol/L, N-甲基咪唑与CuCl的量为4∶1，反应温度为120 ℃，反应压力为2.40 MPa，CO与O2的进气比2∶1，反应3 h的条件下甲醇的摩尔转化率为15.4%，选择性为98%以上。从腐蚀性试验结果看，50 ℃时，加入N-甲基咪唑化合物后，Q235钢在CuCl/CH3OH/H2O/CO/O2体系中的腐蚀速率为0.22mm/a，缓蚀效率为94.5%。动力学研究表明，反应近似为一级，加入N-甲基咪唑后，反应速率常数为0.15 min－1。     

Synthesis and Biological Evaluation of New Fused Thiazolo[4,5-d] Pyridazine Derivatives

The synthesis of thiazolo[4,5-d]pyridazines and the unknown ring systems, thiazolo[4,5-d]-1,2,4-triazolo- and tetrazolo[4,3-b]pyridazines as well as thiazolo(4,5-d]pyridazino[2,3-c]2H triazines, has been achieved according to different pathways. Biological testing of the new tricyclic heterocycles revealed that some of these compounds possess remarkable antibacterial activity.     

New spectrophotometric method for the determination of trace amounts of palladium

Summary A simple, rapid, selective, and sensitive method for the spectrophotometric determination of palladium is developed based on the reaction of Pd(II) with 1-amino-4-hydroxyanthraquinone (AMHA). The reaction is carried out atpH 3.8 in 50% (v/v) ethanol-water medium. The molar absorptivity of the complexed ligand is 1.1 · 10⁴ l mol^–1 cm^–1 at 620 nm. Calibration plots are linear up to 17 µg Pd cm^–3. The optimum concentration range (Ringbom plot) is between 3–14.5 µg cm^–3. The spectral study of the reaction in solutions containing equimolar concentrations or an excess of one component, in thepH range 0.3–6.5, indicate the possible complex transitions that occur in solution. Complete graphical and logarithmic analysis of the absorbance-pH graphs was performed to demonstrate and characterize the complexation equilibria in solution. Under the optimum conditions, palladium can be determined as the noncharged complex Pd(AMHA)₂ in the presence of a large number of foreign ions. Interferences caused by zirconium(IV) could be masked with fluoride ions.

---

Eine neue spektrophotometrische Methode für die Bestimmung von Palladium in Spuren

Zusammenfassung Eine einfache, schnelle und empfindliche Methode für die spektrophotometrische Bestimmung von Palladium wurde auf der Basis der Reaktion von Pd(II) mit 1-Amino-4-hydroxyanthrachinon (AMHA) entwickelt. Die Reaktion wird in 50% (v/v) Ethanol/Wasser beipH 3.8 ausgeführt. Die molare Absorption des komplexierten Liganden beträgt 1.1 · 10⁴ l mol^–1 cm^–1 bei 620 nm. Kalibrierungskurven verlaufen bis zu 17 µg Pd cm^–3 linear. Der optimale Konzentrationsbereich (Ringbom-Plot) liegt zwischen 3 und 14.5 µg cm^–3. Spektroskopische Untersuchungen der Reaktion in Lösungen, entweder mit equimolaren Konzentrationen oder mit einem Überschuß an einer Komponente impH-Bereich 0.3–6.5, lassen Rückschlüsse auf mögliche Komplex-Übergänge in Lösung zu. Es wurde eine vollständige graphische, logarithmische Analyse der Absorptions-pH-Graphen durchgeführt, um die Komplexgleichgewichte in Lösung aufzuklären und zu charakterisieren. Unter den Optimalbedingungen kann Palladium als nichtgeladener Komplex Pd(AMHA)₂ in Gegenwart einer großen Anzahl an Fremd-Ionen bestimmt werden. Schwierigkeiten mit Zirkonium(IV) konnte durch Maskierung mit Fluorid-Ionen umgangen werden.

     

Effect of sodium oxide doping on solid-solid interactions between V2O5 AND Al2O3

A V₂O₅/Al₂O₃ mixed solids sample was prepared with a molar ratio of 0.41 Na₂O (4 and 10 mol%) was added in the form of sodium nitrate prior to calcination in air in the temperature range 500–1000C. Solid-solid interactions between V₂O₅ and Al₂O₃ were studied using DTA and TG curves and their derivatives together with XRD techniques.The results obtained showed that Na₂O interacted with V₂O₅ at temperatures starting from 500C to yield a sodium/vanadium compound, Na_0.3V₂O₅ which remained stable and decomposed in part by heating at 1000C. V₂O₅ exists in orthorhombic and monoclinic forms in the case of pure mixed solids and those containing 4 mol% of Na₂O and preheated at 500C, and in monoclinic form in the case of the mixed solid doped with 10 mol% of Na₂O.Heating of pure and doped mixed oxide solids at 650C resulted in the conversion of most of the V₂O₅ into AlVO₄. Doping with sodium oxide enhanced the solid-solid interaction between V₂O₅ and Al₂O₃ at 650C to produce AlVO₄. The produced AlVO₄ decomposed completely on heating at 700C to form -Al₂O₃ and V₂O₅, (orthorhombic and monoclinic forms).The presence of Na₂O was found to decrease the relative intensity of the diffraction lines of -Al₂O₃ (corundum) produced at 750C which indicated some kind of hindrance of the crystallization process.Heating of pure and doped mixed solids at 1000C resulted in a further crystallization of acorundum together with V₂O₅ and sodium vanadate, Na_0.3V₂O₅. However, the intensities of diffraction lines relative to those of the sodium vanadium compound were found to decrease markedly by heating at 1000C, indicating partial thermal decomposition into vanadium and aluminium oxides.     

Spectrophotometric assay of retinol via charge-transfer complexes

Simple and sensitive spectrophotometric methods for the assay of retinol have been presented. The first method was based on the reaction of retinol with iodine to give a molecular charge-transfer complex, the retinol acting as n-donor and iodine as -electron acceptor. The second method depends on the formation of a highly coloured stable radical anion between retinol and 7,7,8,8-tetracyanoquinodimethane (TCNQ as a -electron acceptor. The molecular ratios of the reactants in the complexes have been established and the experimental conditions leading to maximum charge-transfer bands were also studied. Beer's law is obeyed over the retinol concentration range 2.5–26 µg/ml. The proposed procedures have been applied successfully to the analysis of drug formulation. The average recovery and average standard deviation was 99.99 ±1.13% with retinol-iodine and 100.001 ± 1.31% with retinol-TCNQ. A kinetic study was performed by heating retinol at 50°C for different periods of time, the result obtained by plotting log c against time indicates that thermal decomposition of retinol is of first order. The results obtained by both methods were in good agreement with those obtained by the official method. The developed procedures were found to be simple, accurate and precise and can be used for the determination of retinol in presence of its degradation products.     

Synthesis,Characterization, and an ab initio Study of a Manganese(II) Macrocyclic Schiff-Base Complex with Two 2-Aminoethyl Pendant Arms

The cyclocondensation of 2,6-diformylpyridine with N,N,N,N-tetrakis(2-aminoethyl)ethane-1,2-diamine (pentene) in the presence of Mn^II forms the [1 + 1] pendant arm Schiff-base macrocyclic complex, [MnL³]²⁺. The ligand is a 15-membered pentaaza macrocycle having two 2-aminoethyl pendant arms {L³= 6,9-bis(aminoethyl)-3,6,9,12,18-pentaazabicyclo[12.3.1]octadeca-1(18),2,12,14,16-pentene}. The complex, investigated by analytical, spectroscopic and magnetic techniques, supports the formation of a highly symmetrical pentagonal bipyramid complex with the Mn^II ion located within a pentaaza macrocycle and two pendant amines coordinating on opposite sides of a plane defined by the macrocycle and the metal ion. The structure of the complex was also verified by ab initio HF-MO calculations using a standard 3-21G basis set.     

Comparative study on the inclusion behaviour of cyclodextrin derivatives with venoruton and rutin by thin layer chromatography

The interaction of rutin and venoruton (troxerutin), with alpha-, beta- and gamma-cyclodextrin (CD), hydroxypropyl-beta-cyclodextrin (HP-beta-CD) and methyl-beta-cyclodextrin (M-beta-CD) was investigated by reversed-phase thin layer chromatography on polyamide plates. A mobile phase consisted of NH(4)OH; NH(4)Cl buffer solution containing various CD concentrations (pH = 9.7, 20 degrees C) was used as mobile phase. The equilibrium constants (K(f)) and the retention factor (R(f)) were determined and used to study the inclusion process. The in fluence of CDs on the solubility of rutin and venoruton was characterized by R(M) values and the increasing hydrophilicity of drugs. The results show that the inclusion capacity of cyclodextrins follows the order HP-beta-CD > M-beta-CD > beta-CD > gamma-CD, and rutin is more easily included by the studied cyclodextrins than venoruton. In addition, the thermodynamic parameters (Delta H, Delta S) for the formation of complexes were obtained from the van't Hoff equation, displaying the enthalpy-entropy compensation effect.     

Thermodynamics of Ion-Association of NaClO4 in Aqueous-Methanol and Aqueous-Glycerol Using Conductance Measurements

The conductance of NaClO₄ at (25–45)°C in methanol-H₂O, and glycerol-H₂O mixtures in a concentration range up to 10^?2 M has been measured. The association constant, K_A, values have been determined, where the conductometric data were analysed by a M S X computer using the Fuoss-Aprano method. The K_A values for NaClO₄ in methanol-H₂O are higher than in glycerel-H₂O mixtures, Also K_A values increase as the proportional of methanol or glycerol increases in mixture. The thermodynamic parameters ΔH°, ΔG°, and ΔS° were also calculated. It is obvious that the entire process of the ionic association in those systems are endothermic ones. The Walden products, Λ_oη were calculated for all systems investigated.     

Nitrogen doped nano porous graphene as a sorbent for separation and preconcentration trace amounts of Pb,Cd and Cr by Ultrasonic assisted in‐syringe dispersive micro solid phase extraction

Nitrogen doped nano porous graphene was used as an efficient sorbent in solid‐phase extraction process for simultaneous separation and pre‐concentration of metal ions lead (II), cadmium(II), and chromium(III)) in biological samples. Ultrasonic assisted in‐syringe dispersive micro solid phase extraction coupled with micro sampling atomic absorption spectrometry was utilized for the determination of metal ions. Nitrogen doped nano porous graphene was synthesized as a nano sorbent by chemical vapour deposition method. Methane and aniline were used as carbon and nitrogen sources. The characterization of sorbent was performed by field emission scanning electron microscope, transmission electron microscopy, atomic force microscope, fourier transform infrared, chemical element analysis and raman analysis. Effective parameters on the extraction efficiency such as pH, sorbent dosage, eluent volume and eluent concentration were optimized by central composite design and desirability function. Experimental results indicate that the optimal conditions for this extraction were pH = 6.4, 1.42 mg of sorbent, 100 μL of eluent, and 0.84 mol L^‐1 of eluent concentration. The detection limits are as low as 1.5, 0.3 and 0.9 μg L^‐1 for lead, cadmium, and chromium, respectively. The intra‐day precisions were 3.6, 4.38 and 2.94 and Inter‐day precision were 4.83, 5.26 and 4.52 for lead, cadmium, and chromium, respectively. Method performance was investigated by determination of mentioned heavy metals in complicated biological matrixes such as human plasma, urine and saliva samples with good recoveries.