Mixed C18 and C1 modification on an optical fiber for chromatographic sensing

An optical fiber-chromatographic sensor, aiming at simultaneous and selective response to multiple components following a chromatographic separation, is described. We report an improved approach for immobilization of octadecyl (C(18)) and methyl (C(1)) moieties as stationary phase on an optical fiber suitable as a sensing phase for organic solutes. By this approach, the stability and lifetime of the sensing layer as well as the detectability and retention behavior of the chromatographic sensor could be improved. Infrared spectroscopy was employed to confirm the presence of C(18) and C(1) moieties on the modified surface of the optical fiber. The chromatographic sensor was applied, with good sensitivity and chemical selectivity, to the simultaneous separation and detection of bromobenzene and toluene, using water as the mobile phase.     

多功能沸点仪的研究

本文提出了两种新型沸点仪——CP-Ⅰ型和CP-Ⅱ型沸点仪, 阐述了仪器各部分结构的设计思想和原理, 并对仪器的性能和各部分功能进行了较为完整的实验考核, 获得了预期的效果。     

Effect of Electrical Pulse Forms on the CO2 Reforming of Methane Using Atmospheric Dielectric Barrier Discharge

Methane conversion using an electric discharge has been studied for many years. Recently, many research groups have developed high-frequency pulsed plasma reaction for methane conversion to higher hydrocarbons and synthesis gas. CO₂ reforming of methane to synthesis gas has also attracted considerable interest as a method of utilization of the greenhouse gases, CO₂ and CH₄, which occupy most of man-made greenhouse gases. In this study, the influence of pulse form of applied voltage on methane and carbon dioxide conversions and product selectivity has been investigated using a cylindrical type DBD reactor. For this purpose, two kinds of power supply were compared, that is, AC power supply which has a high-frequency sinusoidal wave form, and AC pulse power supply which has modified AC pulse wave form. The conversions of methane and carbon dioxide were enhanced using pulsed plasma. The lower pulse width was more profitable economically.     

Miscibility in systems containing aqueous solutions of various alkylbenzenesulfonates, toluene and, n-butanol

Miscibility relationships in four-component systems containing sodium alkylbenzenesulfonates, toluene, n-butanol, and water were studied at 25°C in the hope of clarifying the complex systems used in the “micellar flood” enhanced oil recovery process. Phase boundary curves for the pseudo three-component systems (constant sulfonate/water ratios, 2.5 moles sulfonate per kg water) were determined. The sulfonates included those of benzene, toluene, xylene, ethylbenzene, isopropylbenzene, mesitylene, cymene, methyl-t-butylbenzene, and diisopropylbenzene, in all of which the alkyl substituents are smaller than in the usual surfactants. The phase boundary curves have similar and fairly symmetrical shapes. The amount of n-butanol (cosolvent) required to produce miscibility decreases with increasing number of alkyl carbons on the benzene ring of the sulfonates and seems relatively independent of the isomeric structure. The sodium salt of diisopropylbenzenesulfonate gives the lowest phase boundary curve (least n-butanol required for miscibility) among the nine sulfonates studied.     

长光路光度法测定中药材中痕量硒

本文研究了用长光路光度法测定痕量硒。在酸性溶液中，Ｓｅ（Ⅳ）催化ＫＣｌＯ３氧化苯肼成偶氮离子，继而与变色酸生成红色偶氮化合物。硒含量在１．０×１０－９～２．０×１０－７ｇ／ｍＬ范围内遵守比尔定律。巯基棉分离后，测定中药材中总硒，获得满意结果。     

Deposition of Layer－by－layer Inorganic－organic Nano－hybrid Ultrathin Films onto SBA－15

Deposition of inorganic-organic nano-hybrid ultrathin films onto mesoporous silicate materials has been proven possible by using layer-by-layer assembly method. In combination with sol-gel method, titania, subsequently dye molecules (or polymer) were successfully fabricated onto the inner wall of SBA-15. Their structures were preliminarily characterized by FTIR and solid-state UV-Vis spectroscopy, thermal analysis, and BET surface area measurements,respectively.