One-Pot Synthesis of 3,5-Disubstituted 1,2,4-Oxadiazoles Directly from Nitrile and Hydroxylamine Hydrochloride Under Solvent-Free Conditions Using Potassium Fluoride as Catalyst and Solid Support

A one-pot synthesis of 3,5-disubstituted 1,2,4-oxadiazoles with two identical substituents directly from the reaction of nitriles and hydroxylamine hydrochloride in the presence of potassium fluoride as catalyst and solid support under solvent-free condition is described. Moreover, the formation of products has been discussed, and a plausible mechanism has been presented. Simplicity of the process, workup in aqueous media, and excellent yields are some advantages of this method.     

Facile Synthesis of Benzotriazole Derivatives Using Nanoparticles of Organosilane-Based Nitrite Ionic Liquid Immobilized on Silica and Two Room-Temperature Nitrite Ionic Liquids

Nanoparticles of organosilane-based nitrite ionic liquid immobilized on silica, 1-butyl-3-methylimidazolium nitrite, and 1-(3-trimethoxysilylpropyl)-3-methylimidazolium nitrite were used as effective reagents for the preparation of benzotriazole derivatives from 1,2-diaminobenzenes at room temperature under mild solvent-free conditions. These ionic liquids play as nitrosonium sources in this procedure.1,2-Diaminobenzene derivatives have been treated with ionic liquids to give the related diaminobenzenes in very good to excellent yields in short reaction times.

Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the full experimental and spectral details.     

Isolation and biological evaluation of chromone alkaloid dysoline,a new regioisomer of rohitukine from Dysoxylum binectariferum

The chromone alkaloid dysoline (1), a new regioisomer of rohitukine (2) along with rohitukine and rohitukine-N-oxide (3) were isolated from the stem barks of Dysoxylum binectariferum. The structure of dysoline (1) was determined by extensive 2D-NMR studies and the absolute configuration was established by NOESY and CD spectra. Dysoline (1) consisted of a 5,7-dihydroxy-2-methylchromone nucleus substituted with a 2′-hydroxylated N-Me piperidine ring at the C-6 position. Dysoline differs from rohitukine by the position of the piperidine ring on the chromone nucleus. Dysoline displayed promising cytotoxicity in HT1080 fibrosarcoma cells with an IC₅₀ of 0.21 μM, and also displayed significant inhibition of proinflammatory cytokines TNF-α and IL-6.     

The electrocatalytic behavior of electrodeposited Ni–Mo–P alloy films towards ethanol electrooxidation

Ternary Ni–Mo–P thin films have been electrodeposited from citrate‐based electrolyte onto graphite substrates for application as anode catalysts for ethanol electrooxidation. The operating deposition parameters were optimized to produce Ni–Mo–P alloy films of outstanding catalytic activity. The phase structure of the deposits was evaluated employing X‐ray diffraction technique. Morphology and chemical composition of the deposited alloy films were studied using scanning electron microscopy and energy‐dispersive X‐ray analysis, respectively. The results demonstrated that the rate of Ni–Mo–P deposition increases with increasing the ammonium molybdate concentration in the plating electrolyte up to 10 g l^?1. Also, the amount of Mo in the deposits increases with increasing the ammonium molybdate concentration up to 7.5 g l^?1, and the maximum Mo content in the film was 9.1 at.%. The catalytic activity of Ni–Mo–P/C alloy films has been evaluated towards electrooxidation of ethanol in 1.0 M NaOH solution by using cyclic voltammetry and chronoamperometry. The catalytic performance of the prepared anodes as a function of the amount of Mo was studied. The results showed an increase in the oxidation peak current density of ethanol with increasing the Mo at.% in the deposited alloy films. Additionally, Ni–Mo–P/C electrodes displayed significantly improved catalytic activity and stability towards electrooxidation of ethanol compared with that of Ni–P/C electrode. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of Interglycosidically S‐Linked 1‐Thio‐Oligosaccharides Under Microwave Irradiation*

Microwave irradiation (MWI) has accelerated the synthesis of S‐(2,3,4,6‐tetra‐O‐acetyl‐β‐D‐glucopyranosyl)thiouronium bromide (2a), whose reaction with 2,3,4,6‐tetra‐O‐acetyl‐α‐D‐glucopyranosyl bromide (1a) in the presence of Et₃N afforded stereoselectively the acetylated β,β‐1‐thiotrehalose 4a. Similarly, the respective D‐galactopyranosyl 4b and 2‐acetylamino‐2‐deoxy‐D‐glucopyranosyl 4c analog as well as 4,4′‐di‐O‐(2,3,4,6‐tetra‐O‐acetyl‐β‐D‐galactopyranosyl) 4d and 4,4′‐di‐O‐(2,3,4,6‐tetra‐O‐acetyl‐α‐D‐glucopyranosyl) 4e derivatives of 2,2′,3,3′,6,6′‐hexa‐O‐acetyl β,β‐1‐thiotrehalose were prepared.     

Uranium recovery from UCF liquid waste by nanoporous MCM-41: breakthrough capacity and elution behavior studies

Adsorption and recovery of uranium by nanoporous MCM-41 from aqueous solutions (synthetic solution and uranium conversion facility liquid waste) were investigated by use of a fixed-bed column (1.2 cm diameter and 3.0 cm height). Adsorption was carried out at flow rates 0.2 and 0.5 mL min^?1, which correspond to retention times of 10 and 6 min. The maximum breakthrough capacity for uranium ions was achieved by use of nanoporous MCM-41 at the optimum pH of 3.6 and flow rate 0.2 mL min^?1 (61.95 μg g^?1). The Thomas and Yan models were applied to the experimental data, by use of linear regression, to determine the characteristics of the column for process design. The breakthrough curves calculated from the models were in good agreement with the experimental data. The elution behavior of uranium on nanoporous MCM-41 was studied with different eluents; the results showed that 0.1 M HCl is good eluent for uranium recovery. The regenerated column could be used in a multitude of adsorption–desorption cycles.     

Synthesis and performance of electroless Ni–P–TiCN composite coatings on Al substrate

Electroless Ni–P and Ni–P–TiCN composite coatings have been deposited successfully on Al substrates. Scanning electron microscopy (SEM) and energy dispersive X‐ray (EDX) techniques were applied to study the surface morphology and the chemical composition of the deposited films. Moreover, X‐ray diffraction (XRD) proved that Ni–P and Ni–P–TiCN deposits have amorphous structures. The properties of Ni–P–TiCN/Al composite films such as hardness, corrosion resistance and electrocatalytic activity were examined and compared with that of Ni–P/Al film. The results of hardness measurements reveal that the presence of TiCN particles with Ni–P matrix improves its hardness. Additionally, the performance against corrosion was examined using Tafel lines and electrochemical impedance spectroscopy techniques in both of 0.6 M NaCl and a mixture of 0.5 M H₂SO₄ with 2 ppm HF solutions. The results indicate that the incorporation of high dispersed TiCN particles into Ni–P matrix led to a positive shift of the corrosion potential and an increase in the corrosion resistance for all aluminum substrates after their coating with Ni–P–TiCN. In addition, Ni–P–TiCN/Al electrodes showed a higher electrochemical catalytic activity and stability toward methanol oxidation in 0.5 M NaOH solution compared with that of Ni–P/Al. Copyright © 2014 John Wiley & Sons, Ltd.     

A highly diastereoselective five-component synthesis of 1-(alkylimino)-5,5-dicyano-3a-aryloctahydro-3-oxacyclobuta[cd]pentalene-1a,2,5a,5b(2H,3aH)-tetracarboxylates

A novel one-pot, five-component synthesis of 1-(alkylimino)-5,5-dicyano-3a-aryloctahydro-3-oxacyclobuta[cd]pentalene-1a,2,5a,5b(2H,3aH)-tetracarboxylates is described. A mixture of phenacyl bromide, malononitrile, isocyanide, and two equivalents of a dialkyl acetylenedicarboxylate undergoes a novel 1:1:1:2 addition reaction at ambient temperature in absolute ethanol to produce diastereoselectively the title compounds in good yields.     

Mononuclear copper(II) complexes of bis-triazole-based macrocyclic Schiff base hydrazones: direct synthesis,EPR studies,magnetic and thermal properties

Mononuclear copper(II) complexes of 1,2,4-triazole-based Schiff base macrocyclic hydrazones, III and IV, have been reported. The prepared amorphous complexes have been characterized by spectroscopic methods, electron spray ionization mass spectrometry, and elemental analysis data. Electrochemical studies of the complexes in DMSO show only one quasi-reversible reduction wave at +0.43 V (ΔE = 70 mV) and +0.42 V (ΔE = 310 mV) for III and IV, respectively, which is assigned to the Cu(II) → Cu(I) reduction process. Temperature dependence of magnetic susceptibilities of III and IV has been measured within an interval of 2–290 K. The values of χ_M at 290 K are 1.72 × 10^?3 cm³ mol^?1 and 1.71 × 10^?3 for III and IV, respectively, which increases continuously upon cooling to 2 K. EPR spectra of III and IV in frozen DMSO and DMF were also reported. The trend g_|| > g⊥ > g_e suggests the presence of an unpaired electron in the d_x2?y2 orbital of the Cu(II) in both complexes. Furthermore, spectral and antimicrobial properties of the prepared complexes were also investigated.