Synthesis of planar-chiral paracyclophanes via samarium(II)-catalyzed intramolecular pinacol coupling

[reaction: see text] A series of [n]paracyclophanediols (n = 8-12) was synthesized by samarium-catalyzed pinacol coupling for their ansa-bridge formation. Enantiomerically pure [n]paracyclophane esters were derived from the diols in a several steps via chiral resolution (for n = 10) or via crystallization-induced asymmetric transformation (for n = 11) by using amino alcohol auxiliaries and their selective cleavages.     

Fluorine-doped TiO2 powders prepared by spray pyrolysis and their improved photocatalytic activity for decomposition of gas-phase acetaldehyde

F-doped TiO₂ (FTO) powders were synthesized by spray pyrolysis (SP) from an aqueous solution of H₂TiF₆. The resulting FTO powders possessed spherical particles with a rough surface morphology and a strong surface acidity. The fluorine concentrations in the FTO powders calculated from XPS spectra significantly depended on SP temperature and ranged from 2.76 to 9.40 at.%. The FTO powder prepared at SP temperature of 1173 K demonstrated the highest photocatalytic activity for the decomposition of gas-phase acetaldehyde under both ultraviolet (UV) and visible light (vis) irradiations, and it was higher than that of commercial P 25. This high photocatalytic activity was ascribed to several beneficial effects produced by F-doping: enhancement of surface acidity, creation of oxygen vacancies, and increase of active sites. It was interesting to point out that the vis photocatalytic activity of FTO powders was achieved by the creation of surface oxygen vacancies rather than the improvement of optical absorption property of bulk TiO₂ in vis region.     

Concentration-dependent frequency shifts and Raman spectroscopic noncoincidence effect of the C=O stretching mode in dipolar mixtures of acetone/dimethyl sulfoxide. Experimental, theoretical, and simulation results

The nu(C=O) Raman band frequencies of acetone have been analyzed to separate the contributions of the environmental effect and the vibrational coupling to the gas-to-liquid frequency shifts of this band and to elucidate the changes in these two contributions upon dilution in DMSO. We have measured the frequencies of the nu((12)C=O) band in acetone/DMSO binary mixtures, the nu((13)C=O) band of the acetone-(13)C=O present as a natural abundance isotopic impurity in these mixtures, and both the nu((12)C=O) and nu((13)C=O) bands in the acetone-(12)C=O/acetone-(13)C=O isotopic mixtures at infinite dilution. These frequencies are compared with those of the nu((12)C=O) band in the acetone/CCl(4) binary mixtures measured previously. We have found the following three points: (i) The negative environmental contribution for the nu((12)C=O) oscillator of acetone completely surrounded by DMSO is reduced in magnitude by +5.5 cm(-1) and +7.8 cm(-1) upon the complete substitution of DMSO with acetone and CCl(4) molecules, respectively, indicating the progressive reduction of the attractive forces exerted by the environment on the nu((12)C=O) mode of acetone. (ii) In DMSO and other solvents, the contribution of the vibrational coupling to the frequency of the isotropic Raman nu((12)C=O) band of acetone becomes progressively more negative with increasing acetone concentration up to a value of -5.5 cm(-1), while the contribution to the frequency of the anisotropic Raman band remains approximately unchanged. The only difference resides in the curvatures of the concentration dependencies of these contributions which depend on the relative solute/solvent polarity. (iii) The noncoincidence effect (separation between the anisotropic and isotropic Raman band frequencies) of the nu(C=O) mode in the acetone/DMSO mixtures exhibits a downward (concave) curvature, in contrast to that in the acetone/CCl(4) mixtures, which shows an upward (convex) curvature. This result is supported by MD simulations and by theoretical predictions and is interpreted as arising from the reduction and enhancement of the short-range orientational order of acetone in the acetone/DMSO and acetone/CCl(4) mixtures, respectively.     

Determination of a polymeric hindered amine light stabilizer in polypropylene formulated with magnesium hydroxide flame retardant by reactive thermal desorption-gas chromatography.

A polymeric hindered amine light stabilizer (HALS), Tinuvin 622 (MW [symbol: see text] 4000), in PP materials formulated with a magnesium hydroxide flame retardant was determined by reactive thermal desorption (RTD) gas chromatography (GC). Two kinds of the HALS components that were formed through the RTD in the presence of tetramethylammonium hydroxide [(CH3)4NOH, TMAH] were clearly observed in the chromatograms of the PP samples, with negligible interference from the other additives and the PP substrate. Here, the coexisting flame retardant was proved to affect significantly the RTD process of the occluded HALS. As a result, the recovery of the HALS components in the RTD-GC chromatograms of the PP samples increased with increase in the content of the flame retardant. This enhancement of the HALS recovery is attributed mainly to the preferential exposure of the HALS on the surface of the ground PP sample through the interaction between the polymeric HALS and the flame retardant in the molten PP during kneading. In spite of such a considerable action of the flame retardant, the observed intensities of the characteristic peaks of HALS by RTD-GC showed a good linear relationship with the HALS content in the PP samples with constant content of the flame retardant (50 phr); this relationship could be used as the calibration line for the determination of the polymeric HALS in the PP materials containing the flame retardant.     

Solid sampling technique for direct detection of condensed tannins in bark by matrix-assisted laser desorption/ionization mass spectrometry

A novel method for the direct analysis of condensed tannin components in bark was developed on the basis of matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) combined with a simple solid sampling technique. The MALDI mass spectra obtained from the wood (bark) powder sample clearly showed a series of peaks corresponding to the sodium ion adducts of condensed tannin oligomers up to around m/z 3000. The results indicate that the condensed tannins in the bark sample used in this work mostly consist of combinations of flavan-3-ol units such as profisetinidin (PF), prorobinetinidin (PR) and prodelphinidin (PD), at least up to 10-mers (m/z approximately 3000).     

Growth limits in platinum oxides formed on Pt-skin layers on Pt-Co bimetallic nanoparticles

The dynamical oxidation processes of Pt-skin layers on Pt(3)Co were investigated in situ and in real-time by time-resolved X-ray absorption spectroscopy combined with electrochemical measurements. Growth limit behaviors and the suppression of higher-order formation of surface oxides were observed, and these might explain the highly durable nature of Pt-skin layers.     

Synthesis and characterization of A4[Re6Q8L6]@SiO2 red-emitting silica nanoparticles based on Re6 metal atom clusters (A = Cs or K, Q = S or Se, and L = OH or CN)

Metal atom clusters constitute very promising candidates as luminophores for applications in biotechnology because they are nanosized entities offering robust luminescence in the near-infrared field (NIR). However, they cannot be used as prepared for biological applications because of potential toxic effects and quenching of the clusters' luminescence in aqueous media, and they therefore need to be dispersed in a biocompatible matrix. We describe herein the encapsulation of octahedral rhenium clusters, denoted as A(4)[Re(6)Q(8)L(6)] (A = Cs or K, Q = S or Se, and L = OH or CN), in silica nanoparticles by a water-in-oil microemulsion process, paying particular attention to the clusters' stability. The obtained A(4)[Re(6)Q(8)L(6)]@SiO(2) nanoparticles are 30 nm in size with good monodispersity and a perfectly spherical shape, as shown by scanning electron microscopy (SEM). The presence of cluster units inside the silica matrix was evidenced by scanning transmission electron microscopy in annular dark-field mode (ADF-STEM). From the point of view of their optical properties, the A(4)[Re(6)Q(8)L(6)]@SiO(2) nanoparticles show red and NIR emission under UV excitation, even when dispersed in water. The evolution of the structural and luminescence properties of clusters before and after encapsulation was followed by Raman and photoluminescence spectroscopy.