Adsorptive removal of nitrogen-containing compounds from fuel by metal-organic frameworks

The adsorptive denitrogenation from fuels over three metal-organic frameworks(MIL-96(Al),MIL-53(Al)and MIL-101(Cr))was studied by batch adsorption experiments.Four nitrogen-containing compounds(NCCs)pyridine,pyrrole,quinoline and indole were used as model NCCs in fuels to study the adsorption mechanism.The physicochemical properties of the adsorbents were characterized by XRD,N2physical adsorption,FT-IR spectrum and Hammett indicator method.The metal-organic frameworks(MOFs),especially the MIL-101(Cr)containing Lewis acid sites as well as high specific surface area,can adsorb large quantities of NCCs from fuels.In addition,the adsorptive capacity over MIL-101(Cr)will be different for NCCs with different basicity.The stronger basicity of the NCC is,the more it can be absorbed over MIL-101(Cr).Furthermore,pore size and shape also affect the adsorption capacity for a given adsorbate,which can be proved by the adsorption over MIL-53(Al)and MIL-96(Al).The pseudo-second-order kinetic model and Langmuir equation can be used to describe kinetics and thermodynamics of the adsorption process,respectively.Finally,the regeneration of the used adsorbent has been conducted successfully by just washing it with ethanol.     

Intrinsic properties of active sites for hydrogen production from alcohols without coke formation

The detailed reaction pathway and coke formation mechanism over Pt/metal oxide nanoparticles during the steam reforming of ethanol（SRE） at 300℃were studied.The catalysts were prepared by incipient wetness impregnation method and were characterized with CO pulse chemisorption, BET surface measurement,oxygen adsorption,ethanol-TPD,NH₃-TPD,and TPO.The SRE activity of the catalysts with steam/ethanol molar ratio of 3/1 was tested using a continuous fixed-bed reactor.Strong interaction between Pt and supports causes lower H₂ production temperatures and no C₂H₄ formation,while weak interaction leads to C₂H₄ formation and strong bonded CO on Pt particles during ethanol-TPD. H₂ production over Pt-based catalysts is mainly resulted from the decomposition and dehydrogenation of ethanol,and decarbonylation of acetaldehyde.Meanwhile,coke can be formed from acetaldehyde,acetone,C₂H₄ and CO.However,when the interaction between Pt and supports is weak,more coke is formed especially from acetone,C₂H₄ and CO.When the interaction is strong,no coke formation is observed due to high oxygen storage capacity of the catalyst.     

Anionic surfactant selective electrode for the titrimetric determination of anionic surfactant

The construction and characteristic performance of a PVC membrane electrode responsive for sodium dodecylsulfate (SDS) are described in this paper. The electrode based on CTA⁺DS^? ion pair as ionophore in PVC membrane displays a Nernstian slope of ?58.8 ± 0.7 mV/decade in a 1.32 × 10^?6 to 3.75 × 10^?3 mol L^?1 concentration range and a limit of detection of 1.13 × 10^?6 mol L^?1. The electrode can be used for 3 months without showing significant changes in the value of slope or working range. The electrode has been utilized as an end point indicator electrode for potentiometric titration involving Hyamine as titrant. More than 100 titrations were carried out for the evaluation of the electrode parameters: the standard deviations of the equivalent volume and the equivalent potential, the height of the potential jump and the number of faulty titrations. The behavior of the electrode was assessed with regard to their usefulness in routine analysis.     

The Synthesis and Biological Activities of [5-(4-Substituted Phenylsulfinyl/Sulfonyl)-1,3-Dimethyl-1H-Pyrazol-4-Yl]-Arylmethanones

Abstract

A novel series of pyrazole derivatives containing substituted phenylsulfinyl/sulfonyl group have been synthesized via the oxidation of intermediate pyrazole sulfoether with H₂O₂ in acetic acid. The novel compounds were characterized by melting point, ¹H NMR, FT-IR, MS, and elemental analysis or HRMS. The biological activity results showed that most of the title compounds exhibit significant fungicidal activities against Alternaria solani Sorauer, Phytophthora capsici, and Corynespora cassiicola.

[Supplementary materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements for the following free supplemental files: Additional text and figures.]     

Vibration of a tapered cantilever of constant thickness and linearly tapered width

The vibration of a cantilever beam with constant thickness and linearly tapered sides is solved using a novel accurate, efficient initial value numerical method. The effects of tip mass, base fixity, and taper on the natural frequencies are determined. This geometrically anisotropic beam vibrates in a mixture of modes in two perpendicular directions.     

Cross-flow heat transfer in fixed bed

Radial flow reactor operated at cross-flow heat transfer is focused for large scale methanol synthesis. The effects of operating conditions including the reactor inlet air temperature, the heating pipe temperature and the air flow rate on the cross-flow heat transfer were investigated and results show that the temperature profile of the area in front of the heating pipe is slightly affected by all the operating conditions. The main area whose temperature profile is influenced is located behind the heating pipe. The heat transfer direction is related to the direction of the flow. In order to obtain the basic parameters for radial flow reactor designing calculation, the dimensionless number group method was used for data fitting of the bed effective thermal conductivity and the wall heat transfer coefficient which were calculated by the mathematical model with the product of Reynolds number and Prandtl number. The comparison of experimental data and calculated values shows that the calculated values fit the experimental data satisfactorily and the formulas can be used for reactor designing calculation.     

Local time-stepping procedures for the space-time conservation element and solution element method

A local time-stepping procedure for the space-time conservation element and solution element (CESE) method has been developed. This new procedure allows for variation of time-step size in both space and time, and can also be extended to become multi-dimensional solvers with structured/unstructured spatial grids. Moreover, it differs substantially in concept and methodology from the existing approaches. By taking full advantage of key concepts of the CESE method, in a simple and efficient manner it can enforce flux conservation across an interface separating grid zones of different time-step sizes. In particular, no correction pass is needed. Numerical experiments show that, for a variety of flow problems involving moving shock and flame discontinuities, accurate and robust numerical simulations can be achieved even with a reduction in time-step size on the order of 10 or higher for grids across a single interface.     

Influence of hydrogenation on the microstructure and crystallization of Zr-Cu-Ni-Al-Y metallic glass

Zr-Cu-Ni-Al-Y metallic glass was electrochemically charged with hydrogen. The hydrogen content in the hydrogenated specimen was derived from the shift of scattering maxima of the X-ray diffraction (XRD) spectra. The microstructures of the untreated Zr-Cu-Ni-Al-Y metallic glass and the hydrogenated specimen have been studied using conventional transmission electron microscopy, high-resolution transmission electron microscopy and energy-dispersive X-ray spectrometry as well as XRD. The untreated Zr-Cu-Ni-Al-Y specimen was found to be almost totally amorphous with a trace amount of yttrium oxide. The addition of the rare-earth element yttrium is beneficial for decreasing the oxygen content in the matrix. Some nanosized precipitates have been found in the hydrogenated specimens. The crystallization of the precipitates was found to consist of two stages. The Zr(Cu, Ni, Al, Y) precipitates segregate in the first stage, while the formation of crystalline ZrH₂ dominates the second stage. The size, amount and distribution of the nanocrystals are mainly related to the charging current and time.     

Indications of bulk property changes from surface ion implantation

In the majority of cases, the effects of ion implantation are confined close to the implant zone but, potentially, the resultant distortions and chemical modifications could catalyse relaxations extending into the bulk substrate. Such possibilities are rarely considered but the present data suggest that high dose ion implantation of ZnO has induced bulk changes. Surface implants with Cu and Tb strongly modified the low temperature bulk thermoluminescence properties generated by X-ray irradiation. Suggestions are proposed for the possible mechanisms for bulk relaxations and structural characteristics, which may indicate where such instability may occur in other lattice structures.