Effect of Arylmethylene Substitutions on Molecular Structure,Optoelectronic Properties and Photovoltaic Performance of Dithienocyclopentafluorene-Based Small-Molecule Acceptors

Two dithienocyclopentafluorene-based small-molecule acceptors (SMAs) were developed that feature methylene-functionalized conjugated side chains, to study the effect of arylmethylene substitution and its number on structure, optoelectronic properties and device performance. Results showed that two SMAs have better absorption properties and planarity, lower bandgaps and higher LUMOs compared with the control SMA without conjugated side chains. The synthesized SMAs were tested in polymer solar cells for examples of their applicability. This work argues that the introduction of methylene-functionalized conjugated side chains has great potential in tuning molecular structure, optoelectronic properties, device physics and photovoltaic performance of SMAs.     

变频控制直接膨胀式太阳能热泵的数值模拟

文中通过对变频控制直接膨胀式太阳能热泵的数值模拟,指出PV/T- SAHP系统实现变频控制从而解决太阳能热泵集热器面积与压缩机的容量不匹配的关键问题是找到系统集热/蒸发器的MSS线.为变工况下太阳能热泵系统的研究提供参考.     

Tunable and Specific Formation of C@NiCoP Peapods with Enhanced HER Activity and Lithium Storage Performance

The superior properties of nanomaterials with a special structure can provide prospects for highly efficient water splitting and lithium storage. Herein, we fabricated a series of peapodlike C@Ni_2?xCo_xP (x≤1) nanocomposites by an anion‐exchange pathway. The experimental results indicated that the HER activity of C@Ni_2?xCo_xP catalyst is strongly related to the Co/Ni ratio, and the C@NiCoP got the highest HER activity with low onset potential of ～45 mV, small Tafel slope of ～43 mV dec^?1, large exchange current density of 0.21 mA cm^?2, and high long‐term durability (60 h) in 0.5 m H₂SO₄ solutions. Equally importantly, as an anode electrode for lithium batteries, this peapodlike C@NiCoP nanocomposite gives excellent charge–discharge properties (e.g., specific capacity of 670 mAh g^?1 at 0.2 A g^?1 after 350 cycles, and a reversible capacity of 405 mAh g^?1 at a high current rate of 10 A g^?1). The outstanding performance of C@NiCoP in HER and LIBs could be attributed to the synergistic effect of the rational design of peapodlike nanostructures and the introduction of Co element.     

The removal of H2S derived from livestock farm on activated carbon modified by combinatory method of high-pressure hydrothermal method and impregnation method

H₂S is considered as the main gas pollutant from livestock farm and activated carbon (AC) is widely used as adsorbent for H₂S. This paper focuses on the influence of modification conditions and operation conditions on the H₂S adsorption performance on AC samples. The H₂S adsorption performance on modified AC (MAC) samples by single and combinatory method has been investigated. It is concluded that the MAC by combinatory method of high-pressure hydrothermal method followed by alkaline solution impregnation method could promote the H₂S adsorption performance remarkably. The H₂S adsorption performance differs with different operation conditions. Meanwhile the samples of fresh AC and exhausted AC have been characterized using BET, FTIR, TPD and Boehm titration method. The experimental results are confirmed that the characteristics of AC have significant influence on the adsorption ability for H₂S.     

A Photo-Responsive Organogel Based on Pyrene-Substituted Acylhydrazone Derivative

A new simple pyrene-substituted acylhydrazone derivative, 4-(3,4-dioctyloxy) phenyl-1-pyrene acylhydrazone (PAH-8), was designed and synthesized. The PAH-8 can form thermo-reversible organogel in DMSO, and shows gelation-induced enhanced fluorescence emission. Xerogel exhibits ribbon-like fibrous aggregates with widths of 0.5-1 μm. The PAH-8 organogel indicates photo-responsive behaviors due to the trans-cis isomerizations of -C=N- bond upon exposure to visible or UV light. Upon visible light irradiation, the partial trans-cis isomerization of the -C=N- bond causes the fiber morphology to disappear, resulting in gel-sol transition, whereas the PAH-8 organogel exhibits few photoisomerizations from trans to cis transition without breakage of the gel state upon UV light irradiation.     

Simultaneous separation and determination of seven isoflavones in Radix Puerariae by capillary electrophoresis with a dual cyclodextrin system

A simple, comprehensive and efficient capillary electrophoresis method using a dual cyclodextrin system was developed for the simultaneous determination of seven isoflavones (3′‐methoxypuerarin, puerarin, 3′‐hydroxypuerarin, ononin, daidzin, daidzein and genistin). Baseline separations of the seven isoflavones were achieved within 11 min with the running buffer consisting of 35 mm sodium tetraborate, 9.0 mm sulfobutylether‐β‐cyclodextrin and 30 mm α‐cyclodextrin at pH 9.34, and peaks were detected at 254 nm. Other separation parameters included the separation voltage for 15 kV and the working temperature for 25°C. Under the optimum conditions, good linearities were obtained with linear correlation coefficients of seven isoflavones of 0.9978–0.9992. The limits of detection and the limits of quantification were 0.7–2.9 and 2.5–9.5 μg/mL, respectively. Excellent precision and accuracy were obtained. The intraday and interday precision ranged from 0.7 to 2.0% and from 0.8 to 1.9%, respectively. The recoveries of seven analytes were from 97.7 to 103.1%. This method was successfully applied to determine the seven analytes in Radix Puerariae and its preparations.     

Joint decision and Naive Bayes learning for detection of space multi-target

In the photoelectric tracking system, the detection of space multi-target is crucial for target localization and tracking. The difficulties include the interferences from CCD smear and strong noise, the few characteristics of spot-like targets and the challenge of multiple targets. In this paper, we propose a hybrid algorithm of joint decision and Naive Bayes (JD-NB) learning, and present the duty ratio feature to discriminate the target and smear blocks. Firstly, we extract the proper features and train the parameters of the Naive Bayes classifier. Secondly, target blocks are preliminarily estimated with the Naive Bayes. Lastly, the 4-adjacent blocks of the candidate target blocks are jointed to analyze the distribution pattern and the true target blocks are secondarily extracted by the method of pattern matching. Experimental results indicate that the proposed JD-NB algorithm not only possesses a high recognition rate of better than 90% for the target block, but also effectively overcomes the disturbance of the smear block. Moreover, it performs well in the detection of small and faint targets when the SNR of the block is higher than about 0.014.     

Morphology–luminescence correlations in europium-doped ZnO nanomaterials

In order to investigate the correlations of morphologies and optical properties, different morphologies of Eu-doped ZnO were synthesized by different methods. Specifically, the structure of SiO₂/ZnO:Eu nanoflower was synthesized for the first time and has not been reported previously. One percent was chosen as the Eu doping concentration. The relations of the morphology, diameter, and uniformity with the PL intensity were examined. The PL intensity of ZOE samples has a close relationship with the morphology. The PL intensity order of the different morphologies of ZnO:Eu is as follows: nanorod arrays > thin film > nanospheres > nanoparticles > nanoflowers > nanorods. The PL intensity of nanomaterials is larger, if the diameter of the nanomaterials is larger. However, the size of diameter is not the most important reason. It was found that the sample uniformity plays a key role on ZnO:Eu PL intensity. ZnO:Eu with small particle diameters may have strong photoluminescence intensity, if the nanoparticles are uniform.     

密闭高压消解–ICP–AES测定进口铜精矿中铅、镉、汞、砷

采用密闭高压消解法对样品进行消解,用电感耦合等离子体发射光谱法(ICP–AES)测定进口铜精矿中的铅、镉、砷、汞有害元素。铅、镉、砷、汞的工作曲线分别在0~10,0~1,0~4,0~0.6μg/mL范围内线性良好,线性相关系数大于0.999。各元素加标回收率均为91.0%~104.7%,相对标准偏差均小于3%(n=7)。将密闭高压消解法与电热板加热法和微波消解法进行了比对分析,结果显示,密闭高压消解–ICP–AES法适合用于铜精矿样品的消解与测定。