Synthesis,crystal structure and property of a novel azide-bridged one-dimensional chain copper(II) complex with a dinucleating macrocyclic polyamine

An azide-bridged polymeric cationic chain complex, [LCu₂(N₃)₂]n(ClO₄)_2n ·n(H₂O)**, where L=the dinucleating macrocyclic ligand bis-p-xylylBISDIEN, has been prepared and characterized by x-ray crystallography, u.v.-vis and i.r. spectra, and by magnetic measurements. The structure consists of cationic azide-bridged [LCu₂(N₃)₂]²⁺ (unit) chains, non-coordinated perchlorate anions and crystallized water molecules. The azide anion is bound to two copper atoms in neighboring units with an end-to-end bridging mode. In each unit, the copper atoms have a different coordination geometry; Cu(1) is a four-coordinated, distorted square-planar geometry, whereas Cu(2) is a five-coordinated, distorted square-pyramid. The electronic spectra of the title complex differ in anhydrous and in aqueous MeCN solutions, indicating that dissociation and solvation occur in aqueous solutions. The characteristic i.r. absorptions of azides and perchlorates are described. Magnetic moments vary from 2.05 (B.M.) at 300K to2.01 (B.M.) at 80K, which suggests that very weak interactions exist between the metals.     

Reactions of sulfur(IV) with an octahedral manganese(IV) complex of 1,8-bis(2-hydroxy benzamido)-3,6-diaza octane: the role of phenolate–amide–amine coordination

The Mn^IV complex of tetra-deprotonated 1,8-bis(2-hydroxybenzamide)-3,6-diazaoctane (Mn^IVL) engrossed in phenolate-amido-amine coordination is reduced by HSO₃⁻ and SO₃²⁻ in the pH range 3.15–7.3 displaying biphasic kinetics, the Mn^IIIL⁻ being the reactive intermediate. The Mn^IIIL⁻ species has been characterized by u.v.–vis. spectra {λ _max, (ε, dm³ mol⁻¹ cm⁻¹): 285(15 570), 330 sh (7570), 469(6472), 520 sh (5665), pH=5.42}. SO₄²⁻ was the major oxidation product of S^IV; dithionate is also formed (18 ± 2% of [Mn^IV]_T) which suggests that dimerisation of SO₃^−• is competitive with its fast oxidation by Mn^IV/III. The rates and activation parameters for Mn^IVL + HSO₃⁻ (SO₃²⁻) → Mn^IIIL⁻; Mn^IIIL⁻ + HSO₃⁻ (SO₃²⁻) → Mn^IIL²⁻ are reported at 28.5–45.0 °C (I=0.3 mol dm⁻³, 10% (v/v) MeOH + H₂O). Reduction by SO₃²⁻ is ca. eight times faster than by HSO₃⁻ both for Mn^IVL and Mn^IIIL⁻. There was no evidence of HSO₃⁻/SO₃²⁻ coordination to the Mn centre indicating an outer sphere (ET) mechanism which is further supported by an isokinetic relationship. The self exchange rate constant (k₂₂) for the redox couple, Mn^IIIL⁻/Mn^IVL (1.5 × 10⁶ dm³ mol⁻¹ s⁻¹ at 25 °C) is reported.     

抗肿瘤药物氮三乙酰肼和金属离子配位能力的研究

本文研究了抗癌药物氮三乙酰肼(Nitrilotriacetic hydrizide,NTH)和生命必需元素以及Al~(3 ),Ga~(3 ),In~(3 )的配位能力并用pH电位法测定了它们在生理条件下(37℃,Ⅰ=150mM dm~(-3)NaCl)的配合物生成常数。电位滴定数据是用ZPLOT,MINIQUAD,ESTA等计算机程序处理的。实验结果表明NTH与它的非生理活性的母体化合物氮三乙酸相比较,对Zn~(2 ),Mn~(2 )等过渡元素的配位能力表现较大的差异性。这种情况在Revercan,ICRF-198,ICRF-236和5-烯去甲基斑蝥酸等其他抗肿瘤活性化合物中也曾观察到。 NTH与三价金属Fe~(3 ),Ga~(3 ),Al(3 )和In~(3 )等有较大的配位能力,这与它的烯醇式结构有关。由于这些配合物在广泛的pH范围内生成,以及它的高稳定性,因此有可能被用作为肿瘤定位试剂或生物体营养元素铁传输的有效载体。     

XeF和KrF的热催化合成及KrF在含氟高能氧化剂NFBF合成中的应用

本文介绍了一种以氟气和惰性气体为原料合成 Kr F2 和 Xe F2 的热催化合成方法并对合成机理和条件作了简单的讨论 ,利用合成的 Kr F2 作为氟化剂合成了含氟高能氧化剂 NF4BF4,纯度约为 93%,其红外光谱和拉曼光谱基本与文献值吻合。元素分析结果表明产品 NF4BF4中含 B5.8%(mass) ,自由氟原子含量为 9.95%(mass) ,与理论值基本一致 ,此结果也间接证明了 Kr F2 质量的可靠性。粉末状的 Xe F2 经升华 -再结晶纯化后可得纯净晶体产品。     

铁－铜－锰氧化物／海泡石催化剂对苯羟基化为苯酚的催化作用

铁－铜－锰氧化物／海泡石催化剂对苯羟基化为苯酚的催化作用曹声春，黄孟光，李克，杜兴军（湖南大学化工系，长沙４１００８２）关键词氧化铁，氧化钢，二氧化锰，海泡石，负载型催化剂，苯，羟基化，苯酚由苯合成苯酚的现行方法存在着反应步骤多，工艺过程复杂，总转化...     

动,静态硫化（NR＋SBR）／PE共混体系的结构与性能

用TEM研究了(NR SBR)/PE共混体系经动、静态硫化后的形态结构及其与力学性能的关系。未硫化和静态硫化体系的形态结构与其组成有关,均以含量大的组份为连续相;对动态硫化体系,当(NR=SBR)/PE<70/30时,均以PE为连续相,其性能主要依赖于构成连续相组份的性质。 动态硫化体系的T_g值低于静态体系,随PE组份含量的增加变化不大,而静态硫化体系的T_g值则随PE含量增加向高温方向迁移。用DSC测得动态硫化体系的结晶度比静态体系的大。前者的应力-应变性能也低于后者。     

Thermal decomposition of the composite hydrotalcites of iowaite and woodallite

The thermal stability and thermal decomposition pathways for synthesized composite iowaite/woodallite have been determined using thermogravimetry analysis in conjunction with evolved gas mass spectrometry. Dehydration of the hydrotalcites occurred over a range of 56–70°C. The first dehydroxylation step occurred at around 255°C and, with the substitution of more iron(III) for chromium(III) this temperature increased to an upper limit of 312°C. This trend was observed throughout all decomposition steps. The release of carbonate ions as carbon dioxide gas initialised at just above 300°C and was always accompanied by loss of hydroxyl units as water molecules. The initial loss of the anion in this case the chloride ion was consistently observed to occur at about 450°C with final traces evolved at 535 to 780°C depending of the Fe:Cr ratio and was detected as HCl (m/z=36). Thus for this to occur, hydroxyl units must have been retained in the structure at temperatures upwards of 750°C. Experimentally it was found difficult to keep CO₂ from reacting with the compounds and in this way the synthesized iowaite-woodallite series somewhat resembled the natural minerals.     

新试剂3,5—二溴—4—偶氮8—羟基喹啉苯基荧光酮光度法测定微量铝

在溴化十六烷基三甲胺（ＣＴＭＡＢ）存在下，ＰＨ６，０的ＨＡｃ－ＮａＡｃ缓冲介质中，铝与新试剂３，５－二溴－４－偶氮８－羟基喹啉苯基荧光酮形成红色三元胶束配合物，最大吸收波长位于５６４ｎｍ，表观摩尔吸光系数ε为１．３５×１０＾５．ｍｏｌ＾－１．ｃｍ＾－１，铝浓度在０～５μｇ／２５ｍＬ范围内符合比耳定律，拟定的方法用于铝铁黄铜中微量铝的测定，结果满意。