The concept of in-situ vapor stripping for removing VOCs from groundwater

An in-situ remediation procedure is proposed to remove Volatile Organic Compounds (VOCs) dissolved in groundwater. This is accomplished by injecton of air into a well, using a combined technique of air-lift pumping with a form of vapor stripping. When air is injected into a well, it causes water to be lifted and forces groundwater flow towards the well, creating a recirculating cleanup zone. During this process, VOCs are transferred from the contaminated water to the rising air bubbles inside the well. The air bubbles are separated from the liquid near the top of the well, and the VOC vapor is collected and treated. In this system, water is not permitted to be lifted to the ground surface. Rather, the water is diverted into the unsaturated zone through a series of drains that are installed beneath the root-zone. The water then, free of a portion of VOCs, infiltrates back to the water table. As water continues to circulate, the VOC concentrations are gradually reduced.The feasibility of the proposed method was analyzed using concepts of mass transfer of VOCs from water to air-bubbles. Calculations indicate that the method has promise because equilibrium partitioning between the contaminated liquid and the gas bubbles is rapidly established.     

Measurement of the Bc+ meson lifetime using the decay mode Bc+ --> J/Psie+nue

We present a measurement of the Bc+ meson lifetime in the decay mode Bc+ --> J/Psie+nue using the Collider Detector at Fermilab II detector at the Fermilab Tevatron Collider. From a sample of about of 360 pb(-1) of pp collisions at square root of s = 1.96 TeV, we reconstruct J/Psie+ pairs with invariant mass in the kinematically allowed range 4< M(J/Psie) < 6 GeV/c2. A fit to the decay-length distribution of 238 signal events yields a measured Bc+ meson lifetime of 0.463(-0.065)(+0.073)(stat) +/- 0.036(syst) ps.     

Measurement of the tt production cross section in pp collisions at square root of s = 1.96 TeV

We present a measurement of the top quark pair production cross section in pp collisions at square root of s = 1.96 TeV using 318 pb(-1) of data collected with the Collider Detector at Fermilab. We select tt[over ] decays into the final states enu+jets and mu nu+ jets, in which at least one b quark from the t-quark decays is identified using a secondary vertex-finding algorithm. Assuming a top quark mass of 178 GeV/c2, we measure a cross section of 8.7 +/- 0.9(stat)(-0.9)+1.1(syst) pb. We also report the first observation of tt[over ] with significance greater than 5sigma in the subsample in which both b quarks are identified, corresponding to a cross section of 10.1(-1.4)+1.6(stat)(-1.3)+2.0(syst) pb.     

Search for a neutral Higgs boson decaying to a W boson pair in pp collisions at square root of s = 1.96 TeV

We present the results of a search for standard model Higgs boson production with decay to WW*, identified through the leptonic final states e+ e- nu nu,+/-mu -/+nu nu and mu+ mu- nu nu. This search uses 360 pb -1 of data collected from pp collisions at square root of s =1.96 TeV by the upgraded Collider Detector at Fermilab (CDF II). We observe no signal excess and set 95% confidence level upper limits on the production cross section times branching ratio for the Higgs boson to WW* or any new scalar particle with similar decay products. These upper limits range from 5.5 to 3.2 pb for Higgs boson masses between 120 and 200 GeV/c2.     

Hydrophobic self-assembly of a perylenediimide-linked DNA dumbbell into supramolecular polymers

The self-assembly of DNA dumbbell conjugates possessing hydrophobic perylenediimide (PDI) linkers separated by an eight-base pair A-tract has been investigated. Cryo-TEM images obtained from dilute solutions of the dumbbell in aqueous buffer containing 100 mM NaCl show the presence of structures corresponding to linear end-to-end assemblies of 10-30 dumbbell monomers. The formation of assemblies of this size is consistent with analysis of the UV-vis and fluorescence spectra of these solutions for the content of PDI monomer and dimer chromophores. Assembly size is dependent upon the concentration of dumbbell and salt as well as the temperature. Kinetic analysis of the assembly process by means of salt-jump stopped-flow measurements shows that it occurs by a salt-triggered isodesmic mechanism in which the rate constants for association and dissociation in 100 mM NaCl are 3.2 × 10(7) M(-1)s(-1) and 1.0 s(-1), respectively, faster than the typical rate constants for DNA hybridization. TEM and AFM images of samples deposited from solutions having higher concentrations of dumbbell and NaCl display branched assemblies with linear regions >1 μm in length and diameters indicative of the formation of small bundles of dumbbell end-to-end assemblies. These observations provide the first example of the use of hydrophobic association for the assembly of small DNA duplex conjugates into supramolecular polymers and larger branched aggregates.     

A disposable microfluidic cassette for DNA amplification and detection

A pneumatically driven, disposable, microfluidic cassette comprised of a polymerase chain reaction (PCR) thermal cycler, an incubation chamber to label PCR amplicons with up-converting phosphor (UPT) reporter particles, conduits, temperature-activated, normally closed hydrogel valves, and a lateral flow strip, was constructed and tested. The hydrogel valves, which were opened and closed with the aid of electrically controlled thermoelectric units, provided a simple means to seal the PCR reactor and suppress bubble formation. The hydrogel-based flow control was electronically addressable, leakage-free, and biocompatible. To test the device, a solution laden with genomic DNA isolated from B. cereus was introduced into the microfluidic cassette and a specific 305 bp fragment was amplified. The PCR amplicons were labelled with the phosphor (UPT) reporter particles, applied to the lateral flow strip, bound to pre-immobilized ligands, and detected with an IR laser that scanned the lateral flow strip and excited the phosphor (UPT) particles that, in turn, emitted light in the visible spectrum. The UPT particles do not bleach, they provide a permanent record, and they readily facilitate the filtering of background noise. The cassette described herein will be used for rapid testing at the point of care.     

Reduction of the allylic substituents in Ni(I)(1,8-dipropenyl-1,4,8,11-tetraazacyclotetradecane)+ by the central Ni(I) in aqueous solutions

The complex Ni(II)(1,8,-di-2-propenyl-1,4,8,11-tetraazacyclotetradecane)(2+), (NiL(1))(2+), was synthesized. X-ray crystallography demonstrates that the complex obtained is the trans-III isomer. The allylic substituents shift the redox couples (NiL(1))(3+/2+) and (NiL(1))(2+/+) anodically relative to the corresponding couples for Ni(II)(1,4,8,11-tetraazacyclotetradecane)(2+), (NiL(2))(2+), as expected. Surprisingly, the lifetime of (NiL(1))(+) in neutral aqueous solutions is shorter than that of (NiL(2))(+). Pulse radiolysis experiments reveal that the allylic substituents are reduced by the central Ni(I) ion. The first step in this reduction is a general acid catalyzed process. The results suggest that this step involves schematically the reaction Ni(I)[bond]NCH(2)CH[double bond]CH(2)(+) + H(+) --> Ni(III)[bond]NCH2CH2CH(2)(2+). The latter transient decomposes slowly with a half-life time of several minutes. Preliminary results support the suggestion that (NiL(2))(+), or other Ni(I)L complexes of this family, might reduce many alkenes present in the solution.     

Reduction of pyracylene by alkali metals: Mechanism and formation of aggregates

Five reaction stages have been identified in the reduction of pyracylene to its dianion. The same stages were also observed in the photochemical oxidation starting with the dianion. The formation of dimers of anions and of mixed valence aggregates is discussed.