用各向同性材料实现宽带声波功能器件设计

利用坐标变换的方法并结合保角映射技术,论文介绍了一种利用常规的各向同性材料来设计声波器件的方法.基于此理论,设计了二维声波隐身斗篷,并进行有限元模拟,证明了该器件的有效性.另外由于设计中没有利用材料共振的性质,所以器件是宽带有效的.该方法将有助于拓宽声波功能器件的设计,并为实验验证声波器件提供了可能.     

Effective field theory: A modern approach to anomalous couplings

We advocate an effective field theory approach to anomalous couplings. The effective field theory approach is the natural way to extend the standard model such that the gauge symmetries are respected. It is general enough to capture any physics beyond the standard model, yet also provides guidance as to the most likely place to see the effects of new physics. The effective field theory approach also clarifies that one need not be concerned with the violation of unitarity in scattering processes at high energy. We apply these ideas to pair production of electroweak vector bosons.     

一种分数阶非线性系统稳定性判定定理的问题及分析

分数阶非线性系统稳定性理论的研究对于分数阶混沌系统同步控制的应用具有重要价值,将分数阶非线性系统稳定性判断转化为相应整数阶非线性系统稳定性判断的探讨很有意义.通过实例表明了:对于时变系数矩阵,如果整数阶系统稳定,其对应的阶次小于1的分数阶系统也稳定的判定定理是错误的,并分析了问题产生的原因.     

Lactic acid fermentation and adsorption on PVP

Applied Biochemistry and Biotechnology - Lactic acid was produced by immobilizedLactobacillus delbreückii cells in a fixedbed reactor and then separated by a column packed with...     

The determination of an equivalent elastic modulus for bodies with cracks by boundary element method

The equivalent elastic modulus of cracked bodies with orderly distributed cracks was computed with the boundary element method. A practical self-consistent scheme has been proposed in consideration of the mutual interaction effects of the cracks. The influence of friction coefficients and orientation of cracks has been investigated. Some computational examples have been given, and the results show that the proposed method is adequate and the scheme is efficient.This project is supported by the National Natural Science Foundation of China.     

Binding energies of excitons in ionic quantum well structures

Il Nuovo Cimento D - We have calculated the binding energies of excitons in quantum well structures based on ionic semiconductors by including the electron-hole interactions with the...     

ZnSe相变、电子结构的第一性原理计算

基于第一性原理平面波赝势(PWP)和广义梯度近似(GGA)方法,对闪锌矿结构(ZB)和岩盐结构(RS)的ZnSe在0—20GPa高压下的几何结构、态密度、能带结构进行了计算研究,分析了闪锌矿结构ZnSe和岩盐结构ZnSe的几何结构.在此基础上,研究了ZnSe的结构相变、弹性常数、成键情况以及相变压强下电子结构的变化机理.结果发现:通过焓相等原理得到的ZB相到RS相的相变压强为15.3GPa,而由弹性常数判据得到的相变压强为11.52GPa,但在9.5GPa左右并没有发现简单立方相的出现;在结构相变过程中,sp3轨道杂化现象并未消除,Zn原子的4s电子在RS相ZnSe的导电性中起主要贡献.     

具有部分超结的新型SiC SBD特性分析

提出了一种具有部分超结（super junction, SJ）结构的新型SiC肖特基二极管,命名为SiC Semi-SJ-SBD结构,通过将常规SBD耐压区分为常规耐压区和超结耐压区来减小导通电阻,改善正向特性.利用二维器件模拟软件MEDICI仿真分析,研究了不同超结深度和厚度时击穿电压(V_B)和比导通电阻(R_on-sp),与常规结构的SBD比较得出,半超结结构可以明显改善SiC肖特基二极管特性,并得到优化的设计方案,选择超结宽度2< 关键词： SiC肖特基二极管 super junction 导通电阻 击穿电压     

DNS study of swirling intensity effect on flow pattern of a circular jet

Abstract  

The figures show the 3D flow pattern of a circular jet with different swirling intensity. Reynolds number is approximately 4300 computed based on the nozzle diameter (d), jet velocity (U), and air fluid property at 1 atm and 300 K. The overall computational domain is set to be 4 × 4 × 12 d in spanwise, height, and streamwise direction. The governing equations are the fully compressible Navier–Stokes equations, firstly differenced by eighth-order explicit scheme and then advanced temporarily by using the fourth-order explicit Runge–Kutta method. 3D characteristics non-reflecting boundary condition including transverse source contribution is imposed on all other boundaries except the inflow boundary handled by assigning fixed profiles of temperature and velocity. To ensure the simulation resolution, here over 16 million grids are employed in sum, combined with a handful of grids located at buffer zones of outflow boundaries. To correctly represent the vortex in the flow field, velocity gradient tensor invariant Q is used here. And ψ refers to the swirling intensity defined as the ratio of tangential momentum to axis momentum. As shown in velocity profile, the flow pattern of the jet changes from a close mode to a totally open mode as ψ increases from 0.4 to 1.5. Accordingly, the recirculation zone gradually moves upstream and backflow velocity is enlarged as well. It is inteseting to found that the obvious drops of the momentums in two shown directions always occur at the same position downstream, no matter how large the ψ value is. Therefore, a momentum compensatory mechanism is expected to exist in the vortex-abundant zone. With the increase of ψ value, the increased strain rate in tangential direction can induce vortex more quickly, intensifying the entrainment and velocity-attenuation, which can be observed in Q value profile.     

Design of dispersive multilayer with particle swarm optimization method

<正>We present a new and efficient method for the design of dispersive multilayer by employing a particle swarm optimization(PSO) technique.Its mathematical background is given and an adaptive PSO is realized with computer code.Two practical designing tasks are solved with this method,and the obtained results are competitive compared with other published structures.The adaptive PSO method demonstrates its merits of fast convergence and powerful global search ability,and could be used as a valuable tool for the optical thin film design.