Graphite disk Lanthanum(III)-selective electrode based on Kryptofix-22DD

ABSTRACT

A novel ion-selective electrochemical sensor based on kryptofix-22DD (1,10-didecyl-1,10-diaza-18-crown-6) as an ionophore was constructed for determination of lanthanum(III) cation in solutions. The D-Optimal Mixture Design(D-OMD) was used as an experimental design strategy for optimal formulation of the membrane ingredients, and the actual values of the ingredients were compared with their predicted values. The amounts of the ionophore, plasticizer, PVC, and also the graphite powder which influence the performance of the fabricated electrode were analyzed using D-OMD. A non-linear relationship was observed between the slope of the electrochemical response of the electrode and these variables and the interaction between the variables as well. The experimental results showed that the amount of the ionophore has the most positive effect on the electrochemical response of the electrode. The constructed electrode exhibits a Nernstian slope (20.60 ± 0.21 mv.decade^?1) in a wide linear concentration range from 1.0 × 10^?7 to 1.0 × 10^?1 M with respect to La³⁺ cation at pH range of 4.0 to 6.0, and its detection limit was found to be:0.8 × 10^?7M. The selectivity of the proposed electrode towards some of the metal cations present in lanthanum(III) cation solutions was tested, and the experimental results showed a good selectivity towards this metal cation.     

The O···H intramolecular hydrogen bond in 4‐X‐2‐hydroxybenzaldehydes: The relationships between geometrical parameters,estimated binding energies,and NMR data

The relationships among geometrical parameters, estimated binding energies, and nuclear magnetic resonance data in –C?O···H? O? intramolecular H‐bond of some substituted 2‐hydroxybenzaldehyde have theoretically been studied by B3LYP and MP2 methods with 6‐311++G** and AUG‐cc‐PVTZ basis sets. All substituents increase estimated hydrogen bond energies E_HBs (with the exception of NO₂ and C₂H₅), which are in good correlation with geometrical parameters, topological properties of electron density calculated at O···H bond critical points and ring critical points by using atoms in molecules method, the results of natural bond orbital analysis, and calculated nuclear magnetic resonance data. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Magnetic molecularly imprinted polymer nanoparticles for dispersive micro solid-phase extraction and determination of buprenorphine in human urine samples by HPLC-FL

A simple, sensitive and accessible while reliable method was developed and validated for quantitation of buprenorphine (Bup) as a highly lipophilic drug in human urine samples. The proposed method is based on a rapid and easy dispersive micro solid-phase extraction procedure using magnetic molecularly imprinted polymer nanoparticles (MMIPNPs), magnetite (Fe₃O₄) cores surrounded by polyamidoamine and Bup as template, followed by high-performance liquid chromatographic analysis with fluorescence detector (HPLC-FL). The prepared MMIPNP adsorbent was characterized by different techniques. Transmission electron microscopy images show that the Fe₃O₄ core nanoparticles are well enwrapped by MIP layers. In determination process, Bup could be quantitatively extracted using MMIPNPs and then can be easily desorbed by mixture of sodium hydroxide (0.1 mol/L) and methanol (1:9, v/v) solution before injection to HPLC. The relative recoveries of Bup were found to be 97.4–100.3%, and the linear dynamic range was within the ranges of 1–1000 ng/mL with R² of 0.9998. Remarkably high quality of 0.21 and 0.71 ng/mL was obtained as the limit of detection and limit of quantification, respectively. The developed method was successfully applied for determination of Bup in infected human urine samples.     

Synthesis, structural and spectroscopic properties of a new Schiff base ligand N,N′-bis(trifluoromethylbenzylidene)ethylenediamine

The Schiff base compound, N,N′-bis(trifluoromethylbenzylidene)ethylenediamine (C₁₈H₁₄F₆N₂) (1), CF₃C₆H₄CHNCH₂CH₂NCHC₆H₄CF₃ has been synthesized by adding a solution of ethylenediammine (en), 0.1 mmol in chloroform to 4-(trifluoromethyl)-benzaldehyde, CF₃C₆H₄CHO (0.2 mmol) and the product was crystallized in ethanol with the mp, 109.2 °C and 75% yield. The crystal structure was investigated by a single-crystal X-ray diffraction study at 150 K. The compound crystallizes in monoclinic space group, P2₁/c with a = 9.295(3), b = 5.976(5), c = 15.204(9) Å and α = 90°, β = 96.56(5)° and γ = 90°. The crystal structure is stabilized by intermolecular CH · · · F hydrogen bonds. The asymmetric unit contains only one-half of the molecule related to the center of symmetry coinciding with C(1)-C(1′) and as a whole, the title molecule is in the staggered conformation. The phenyl rings and the CN imine bonds are co-planar. The infrared spectrum showed a sharp peak at 1640 cm⁻¹ which is typical of the conjugated CN stretching and strong peaks at 800-1400 cm⁻¹ regions are due to the C-C and C-H stretching modes. Electronic absorption spectra exhibits strong absorption in the UV region (240 nm wavelength) which have been ascribed to , and electronic transitions. The ¹H NMR spectra showed three distinct peaks at 2.5, 7.8 and 8.5 ppm which are assigned based on the splitting of resonance signals and are clearly confirmed by the X-ray molecular structure. The aromatic protons appear at about 7.8 ppm and the imine protons at 8.5 ppm. The sharp singlet at about 3.95 ppm is assigned to the CH₂-CH₂ protons. Mass spectra of the titled compound showed the molecular ion peak at m/e 372 (M⁺), and fragments at m/e 353 (M-F), 342 (M-2F), 200 (M-CF₃C₆H₄CHN), 186 (M-CF₃C₆H₄CHNCH₂).     

Efficient synthesis of novel tricyclic fused pyranothiazolopyrimidine derivatives via isocyanide-based three-component reactions

An efficient and facile one-pot synthesis is described for the preparation of novel tricyclic fused pyranothiazolopyrimidines containing both biologically active thiazolopyrimidine and pyranopyrimidine templates via three-component reaction involving an isocyanide with a dialkylacetylenedicarboxylate (DAAD) and 2,3-dihydro-5H-[1,3]thiazolo[3,2-a]pyrimidine-5,7(6H)-dione, in high yields.     

The Eigenvalues of a Class of Elliptic Differential Operators

Consider $\left(M,g\right)$ as an $n$-dimensional compact Riemannian manifold. In this paper we are going to study a class of elliptic differential operators which appears naturally in the study of hypersurfaces with constant mean curvature and also the study of variation theory for $1$-area functional.     

1H, 13C, NH, HH, CH COSY, HH NOESY NMR and UV-vis studies of Solophenyl red 3BL dye azo-hydrazone tautomerism in various solvents

Azo-hydrazone tautomeric behavior of polyazo Solophenyl red 3BL (C.I. Direct 80) dye in different solvents (water, methanol and DMSO) was investigated using 1H, 13C, NH, HH, CH COSY, HH NOESY NMR techniques and UV-vis spectroscopy. Two-dimensional NMR experiments were used to assign 1H, 13C and 15N NMR lines unambiguously. Results showed that the hydrazone-form proton NMR signal appeared in the weakest field with respect to tetramethylsilane, in comparison with the amide and phenolic proton NMR signals. UV-vis absorption spectroscopic evidences showed that azo-hydrazone mixture exists in water and DMSO solvents, but in methanol, only azo tautomer was dominant, which was in a good agreement with NMR spectroscopic results.     

On generalized symmetric Finsler spaces

In this paper, we study generalized symmetric Finsler spaces. We first study some existence theorems, then we consider their geometric properties and prove that any such space can be written as a coset space of a Lie group with an invariant Finsler metric. Finally we show that each generalized symmetric Finsler space is of finite order and those of even order reduce to symmetric Finsler spaces and hence are Berwaldian.     

Bis[N,N′‐(2‐chlorobenzylidene)ethylenediamine‐κ2N,N′]copper(I) dichloridocuprate(I) acetonitrile solvate

The 1:1 adduct of N,N′‐bis(2‐chlorobenzylidene)ethylenediamine (cb₂en) with copper(I) chloride proves to be an ionic compound with Cu^I‐centred cations and anions, [Cu(C₁₆H₁₄Cl₂N₂)₂][CuCl₂]·CH₃CN. In the cation, the Cu^I atom has a flattened tetrahedral coordination geometry, with a small bite angle for the chelating ligands, which form a double‐helical arrangement around the metal centre. The anion is almost linear, as expected. The packing of the cations involves intermolecular π–π interactions, which lead to columns of translationally related cations along the shortest unit‐cell axis, with anions and solvent molecules in channels between them.