Low temperature testing and neutron irradiation of a swept charge device on board the HXMT satellite

We present the low temperature testing of an SCD detector, investigating its performance such as readout noise, energy resolution at 5.9 keV and dark current. The SCD's performance is closely related to temperature, and the temperature range of -80 ℃ to -50 ℃ is the best choice, where the FWHM at 5.9 keV is about 130 eV. The influence of the neutron irradiation from an electrostatic accelerator with fluence up to 1×10⁹ cm^-2 has been examined. We find the SCD is not vulnerable to neutron irradiation. The detailed operations of the SCD and the test results of low temperature are reported, and the results of neutron irradiation are discussed.     

HIRFL-CSRm内靶实验终端CsI(Tl)电磁量能器性能模拟

基于GEANT4模拟了HIRFL CSRm内靶实验终端的CsI(Tl)电磁量能器系统,给出了CsI电磁量能器的最佳设计参数及可能达到的性能.结果表明,设计的CsI(Tl)电磁量能器系统能够满足所研究的物理要求. Based on the GEANT4, the performance of the electromagnetic calorimeter (EMC) of the internal-target detector at HIRFL-CSRm is simulated. The simulation results show that 1.5%—3% of the energy resolution σ_E/E and 2° of the polar angular resolution σ_θ can be obtained. The invariant mass of the π~0 decay can be reconstructed well. The performance can meet the requirement of studying the proposed physics at HIRFL-CSRm.     

湍流预混火焰中的浮力效应

本文利用数值模拟研究了浮力对湍流预混V形火焰平均速度场的影响,发现浮力效应主要体现在远场区域,而在火焰刷附近非常有限;利用落塔和 OH-PLIF 方法在正常重力和微重力下观测了火焰皱褶,发现浮力压制火焰皱褶的程度与湍流强度密切相关。分析表明斜压机理是浮力影响火焰皱褶的重要原因。     

三量子位Heisenberg XX 链中杂质对纠缠的影响

研究了有杂质时三量子位Heisenberg-XX链中正常格点之间的热纠缠情况，给出了Concurrence的解析表达式.进一步的讨论发现，杂质对正常格点的热纠缠有着重要的影响，甚至能够改变纠缠在反铁磁区的特性.理论表明，可以通过调节温度和杂质参数来控制纠缠. 关键词： Heisenberg -XX链 热纠缠 杂质格点     

Short‐wavelength infrared defect emission as a probe of degradation processes in 980 nm single‐mode diode lasers

Infrared emission from 980‐nm single‐mode high power diode lasers is recorded and analyzed in the wavelength range from 0.8 to 8.0 μm. A pronounced short‐wavelength infrared (SWIR) emission band with a maximum at 1.3 μm originates from defect states located in the waveguide of the devices. The SWIR intensity is a measure of the non‐equilibrium carrier concentration in the waveguide, allowing for a non‐destructive waveguide mapping in spatially resolved detection schemes. The potential of this approach is demonstrated by measuring spatially resolved profiles of SWIR emission and correlating them with mid‐wavelength infrared (MWIR) thermal emission along the cavity of devices undergoing repeated catastrophic optical damage. The enhancement of SWIR emission in the damaged parts of the cavity is due to a locally enhanced carrier density in the waveguide and allows for an analysis of the spatial damage patterns. The figure shows a side view of a diode laser during catastrophic degradation as recorded by a thermocamera within 5 successive current pulses. The geometry of the device is given in grayscale. The position of the laser chip is indicated by the dotted line. The thermal signatures of the internal degradation of the diode laser are overlaid in color. The bi‐directional spread of the damage along the laser cavity is clearly visible.     

一种多重图像融合系统的电配准技术

在多光谱实时图像融合实验系统的基础上,提出一种实现图像融合系统中非共轴光学系统微小量配准的电子学方法,讨论了配准原理、所采用的技术方案及系统实现的技术途径。在机械粗配准之后,系统可快速实现系统微小量的配准功能     

锁相环的相位模型与实验电路

讨论了锁相环的相位数学模型,给出了一种适合于数学的锁相环实验电路．     

最优化方法在拟合正交系晶体弹性及压电系数中的应用

由布里渊散射实验可以得到晶体弹性及压电系数。本文介绍了最优化方法在拟合正交晶体弹性及压电系数中的应用 ,并对几种主要的最优化算法的稳定性、初值选取、拟合数据结果的判断及评价等关键问题做了详细的讨论     

Synthesis and high-frequency magnetic properties of sol–gel derived Ni–Zn ferrite–forsterite composites

Ni_0.5Zn_0.5Fe₂O₄–forsterite composites were synthesized by a sol–gel method. X-ray diffraction and SEM were used to characterize the crystallization behavior of the composite samples which were heat treated at temperatures varying from 800 to 1100°C. The results showed that Ni_0.5Zn_0.5Fe₂O₄ and forsterite (Mg₂SiO₄) can co-crystallize and the crystallites grow even more larger with increasing heat-treatment temperature. High-frequency (10 MHz–1 GHz) magnetic and dielectric properties of the composite samples were presented. Permeability increased with heat-treatment temperature. Quality factor was found to be two orders higher than that of equivalent pure, bulk ferrite.