A NOVEL METHOD FOR FABRICATING COMPOSITE MOSAIC MEMBRANE WITH UNIQUE NF SELECTIVITY

A novel method of fabricating composite mosaic membranes was studied on the basis of interracial polymerization （IP） by coating a thin selective layer onto the surface of a micro-porous hollow-fiber membrane, in which, 2,5-diaminobenzene sulfonic acid was used as one monomer of the IP reaction, and a mixture of trimesoyl chloride （TMCI） and 4-（chloromethyl） benzoyl chloride as the other monomer. Through the IP reaction a thin selective layer with negatively charged groups could be first formed on the polyethersulfone （PES） support membrane. Then trimethylamine solution was introduced to modify the IP layer through a quaternization reaction. Thus the selective layer of this composite membrane contained both negatively charged and positively charged groups to perform the mosaic functionality. Characterization of the composite mosaic membranes was carried out through permeation experiments using different inorganic salts and dyes. The experimental results showed that the membranes could permeate both mono- and bi-valent inorganic salts, but reject larger organic molecules. Such a mosaic membrane is potentially useful for the separation of salts from water-soluble organics, especially in dye and textile industries.     

High resolution electronic study of ONO, ONO and ONO: A rovibronic survey covering 11 800-14 380 cm

The 11 800-14 380 cm⁻¹ frequency range has been scanned for rotationally resolved rovibronic transitions in the A²B₂-X²A₁ electronic band system of the symmetric (C_2v) ¹⁶O¹⁴N¹⁶O and ¹⁸O¹⁴N¹⁸O isotopologues and in the corresponding electronic band system of the asymmetric (C_s) ¹⁸O¹⁴N¹⁶O isotopologue. The rotational analysis—reflecting minor differences in mass—in combination with symmetry induced spectral differences allows an identification of 68 ¹⁶O¹⁴N¹⁶O vibronic levels, 26 ¹⁸O¹⁴N¹⁸O vibronic levels and 51 ¹⁸O¹⁴N¹⁶O vibronic levels. The bands are recorded using near infrared fluorescence spectroscopy and a piezo valve based pulsed molecular beam expansion of premixed ¹⁸O₂ and ¹⁴N¹⁶O in Ar. The majority of the observed bands is rotationally assigned and can be identified as transitions starting from the vibrational ground state of one of the isotopologues. Numerous hot bands have also been identified. A comparison of the overall spectroscopic features of C_2v vs. C_s symmetric species provides qualitative information on symmetry dependence of vibronic couplings.     

Study on anti-emission materials for non-emitting grid applications in microwave power tubes

Hafnium and platinum were deposited onto molybdenum grids by ion-beam assisted deposition method. Electron-emission characteristics from molybdenum grids with Hf and Pt films, which were contaminated by active electron-emission substances (Ba, BaO) of the cathode, were measured using analogous diode method. The surfaces of grids were analyzed by X-ray diffraction. The results revealed that the reaction between BaO and Hf formed BaHfO₃ compound, which greatly reduced the accumulation of BaO on the surface and accordingly decreased grid emission. In contrast, Ba were formed by the decomposition of BaO on the surface of Pt film under high temperature and re-evaporated from its surface, which reduced the active electron-emission substances on the surface of the grid and effectively restrained grid emission. Their mechanisms for grid-emission suppression are discussed and a good method to develop new grid-coating materials is suggested.     

Low-temperature hydride furnace modified for the atomic absorption spectrometric determination of metals with low appearance temperatures

The sample is vaporized from tungsten filament coils (150 W) and transported by an argon stream to the cell of a modified hydride furnace for atomic absorption spectrometry (a.a.s.). The system provides almost the same sensitivity for elements with low appearance temperatures (e.g., Bi, Cd, Pb, Tl, Zn) as graphite-furnace a.a.s. The detection limits are between 0.1 and 5 ng ml^?1, depending on the element.     

Numerical study on performance of disk MHD generator using frozen inert gas plasma

In an magnetohydrodynamic (MHD) generator using a frozen inert gas plasma (FIP), the availability of a frozen argon plasma, the influence of plasma uniformity at the generator inlet on the performance, and the feasibility of a large-scale generator are numerically examined by /spl gamma/-/spl theta/ two-dimensional simulation. The FIP is produced by pre-ionizing inert gas without an alkali metal seed at the generator inlet, then the ionization degree of the plasma is kept almost constant in the whole of the channel because of considerable slow recombination of the inert gas just like frozen reaction plasma. It is found that not only helium, but also argon frozen plasma MHD generation is realized, although highly accurate control of inlet ionization degree is necessary for argon. It is important to reduce the nonuniformity of plasma properties at the generator inlet in order to raise the maximum enthalpy extraction ratio. Even for the large-scale generator with 1000-MW thermal input, the ionization degree is kept almost constant in the whole of the channel and the high performance is obtainable. This result is extremely attractive for the FIP MHD generator.     

Liquid-like structure of vapour quenched SnAu- and SnCu-films

SnAu- and SnCu-alloys are vapour quenched at cryogenic temperatures. Resistivity and electron diffraction patterns were recorded in situ. The scattered intensities have been normalized to interference functions. The overall agreement with those of the corresponding liquid systems is quite well. The average interatomic distances obtained from the atomic distribution functions show a concentration dependence which corresponds closely to that found in liquid SnAu and SnCu respectively. This gives evidence to the statement that the nearest neighbour organisations of the films are very similar to those of the corresponding liquids. Furthermore it turned out that the local structures in the Sn-rich SnAu-system are substantial different from those in the Sn-rich SnCu-system, except in the vicinity of a minimum amount of noble metals (8–10 at.%), which is necessary to stabilize the amorphous state.     

Optical separation of racemic 5-(p-hydroxyphenyl)-5-phenylhydantoin by reversed phase high-performance liquid chromatography using eluents containing beta-cyclodextrin.

Both S-(-)- and R-(+)-enantiomers of 5-(p-hydroxyphenyl)-5-phenylhydantoin (p-HPPH), a main oxidative metabolite of the achiral antiepileptic drug phenytoin, could be determined simply, sensitively and accurately using reversed phase high-performance liquid chromatography by using a methanol-monopotassium phosphate eluent containing beta-cyclodextrin. Using this assay procedure, it was determined that an S-(-)-enantiomer was formed predominantly by the oxidation of phenytoin in isolated rat hepatocytes.