水/油型微乳液中球形及棒状钛酸锶钡纳米粒子的控制合成

Barium strontium titanate nanoparticles with spherical and rod-like morphologies were synthesized in water/Triton X-100/n-hexanol/cyclohexane quaternary reverse microemulsion solution. The influences of the molar ratio of water to surfactant (ω₀) and the concentration of reactants on the morphology and size of barium strontium titanate nanoparticles were studied. The structure, compositions and morphology of the prepared products were characterized by XRD, SAED, ICP, EDS and TEM. The results show that the obtained Ba_0.7Sr_0.3TiO₃ spherical nanoparticles with diameters of 20～100 nm and the Ba_0.7Sr_0.3TiO₃ nanorods with diameters of 70～120 nm and lengths up to 600～800 nm are a single crystal, with a cubic phase. The molar ratio for barium, strontium and titanate in products is about 0.7:0.3:1.     

硅基交联聚酸正丁酯反相HPLC固定相的研究

采用硅胶表面直接交联聚合法，制备了硅基交联聚丙烯酸正丁酯反相高效液相色谱固定相。用红外、扫描电镜和元素分析等方法对固定对进行了表征。考察了固定相对含氧芳烃衍生物的分离。     

人γ晶体蛋白的一级结构测定 1.γ晶体蛋白的分离提纯及其顺序测定方法(GC/MS法)的研究

成功地从人眼晶体中分离出单纯组分的γ晶体蛋白,对γ晶体蛋白的纯度、相对分子质量、氨基酸组成、N末端氨基酸组成等进行了测定,利用酸水解法和酶解法对γ晶体蛋白进行了水解和酶解条件的摸索、找出了使γ晶体蛋白断裂成适合于GC/MS联用仪进行结构测定的肽段的裂解条件。对进行氨基酸顺序测定的GC/MS法化学衍生化条件作了一系列的摸索,找出了化学衍生化的合适条件。对衍生化过程中的一些影响因素也进行了探讨。     

聚（甲基丙烯酸甲酯—二甲基二烯丙基氯化铵）的合成及表征

以水和乙醇作混合溶剂，用逐步滴加甲基丙烯酸甲酯的方法，通过自由基聚合，由溶解性和共聚活性差异较大的两种单体ＭＭＡ和二甲基二烯丙基氯化铵合成了新型含阳离子共聚物聚，并用ＩＲ和＾１Ｈ－ＮＭＲ进行了分析表征。该共聚物溶于丙酮和水组成的二元溶剂，并与Ｐ（ＭＭＡ－ＭＡＡ）有较强的分子复合能力。     

Surprising selectivity in the transformation of dimethoxy azaindoles

Transformation of 4,7-dimethoxy-6-azaindole into 4-hydroxy-7-methoxy-6-azaindole or 7-hydroxy-4-methoxy-6-azaindole can be readily controlled by careful selection of a reagent. Treatment with concentrated HCl results in hydrolysis at the 4-position exclusively, while TMS-I provides demethylation at the 7-position only. Products were unambiguously identified by single crystal X-ray crystallography.     

影响β—环糊精及其衍生物对萘胺荧光增强效应的一些因素

研究一有机溶剂，无机盐，尿素对萘胺－β－环糊精及其衍生物荧光体系的影响，发现它们对萘胺有荧光增强效应，初步探讨了其中的作用机理。     

KF/Al~2O~3/PEG 4000(FAP)存在下氯仿的Michael加成反应

在KF/Al~2O~3/PEG4000(FAP)存在下,氯仿可与α,β-不饱和羰基化合物进行Michael加成反应,得到中等产率的三氯甲基化合物。     

Aza-Baylis-Hillman reaction of salicyl N-tosylimines with methyl vinyl ketone, ethyl vinyl ketone or phenyl vinyl ketone

Reactions of salicyl N-tosylimines with methyl vinyl ketone, ethyl vinyl ketone or phenyl vinyl ketone proceeded smoothly under mild conditions to give the corresponding chromanes or aza-Baylis-Hillman adducts in moderate to excellent yields in the presence of phosphine or nitrogen Lewis base.     

Disk morphology and disk-to-cylinder tunability of poly(acrylic acid)-b-poly(methyl acrylate)-b-polystyrene triblock copolymer solution-state assemblies

Disk and cylindrical micellar assemblies were formed through self-organization of poly(acrylic acid)-b-poly(methyl acrylate)-b-polystyrene (PAA-b-PMA-b-PS) amphiphilic triblock copolymers with organic diamines as counterions in water/ tetrahydrofuran (THF) solvent mixtures. The system was investigated by means of transmission electron microscopy and cryogenic transmission electron microscopy. It was found that the assembled-state morphologies could be modified by alteration of the type and concentration of cationic diamine counterion undergoing interaction with the negatively charged, polyelectrolyte PAA corona block, the relative amount of water in the water/THF mixture, and the hydrophobic block chain length. Multivalency of the organic amine counterion was critical for disk formation. It was further demonstrated that a single block copolymer underwent disc-to-cylindrical micellar transitions reversibly with variation in the relative water/THF ratio. The ability to form disks beginning from either THF-rich or water-rich solutions indicated that the disk morphology was thermodynamically stable and that THF was important in keeping the micellar structure from becoming kinetically frozen. The nanoassemblies were produced having low size dispersities and were stable for at least one month. Intermediate structures between disks and cylinders were also observed, indicating two distinct kinetic pathways between the two micelle structures.     

Cu-Ce/γ-Al2O3对硬脂酸催化水热脱氧产生烷烃的效果

利用等体积浸渍法制备Cu-Ce/γ-Al₂O₃催化剂，并在无H₂存在的条件下对硬脂酸进行催化水热液化。对催化剂进行BET比表面积分析和X射线衍射（XRD）分析可知，Cu-Ce/γ-Al₂O₃催化剂中存在CuO和CeO₂两种晶型，在300℃条件下水热反应12 h后具有更好的热稳定性。通过对硬脂酸进行水热液化实验和对生物油进行气相色谱-质谱（GC-MS）分析发现，加入Cu-Ce/γ-Al₂O₃催化剂能够获得最高的硬脂酸转化率（94.71%）和总烃产率（81.41%），水热液化脱氧效果最好。分析正烷烃的产率，结果发现硬脂酸在高温水热条件下主要发生脱羧反应。Cu-Ce/γ-Al₂O₃催化剂的加入能够同时促进反应过程中脱羧反应、加氢脱氧反应和裂化反应。此外，Cu-Ce/γ-Al₂O₃还能够促进羰基基团的脱除，有效减少产物中的醛和酮类物质。