(CdZnTe,ZnS)/ZnTe复合量子阱的光学特性研究

设计并制备了一种新型的(CdZnTe,ZnS)/ZnTe复合量子阱结构.使CdZnTe量子阱中的激子有可能在短时间内隧穿到ZnS阱层,从而达到提高光双稳器件“关”速度的目的.并通过对发光特性的研究证实在我们设计的结构中横向激子隧穿的存在,从而为进一步研究超高速光开关提供了实验依据.     

Effects of SiNx on two-dimensional electron gas and current collapse of AlGaN/GaN high electron mobility transistors

SiN_x is commonly used as a passivation material for AlGaN/GaN high electron mobility transistors (HEMTs). In this paper, the effects of SiN_x passivation film on both two-dimensional electron gas characteristics and current collapse of AlGaN/GaN HEMTs are investigated. The SiN_x films are deposited by high- and low-frequency plasma-enhanced chemical vapour deposition, and they display different strains on the AlGaN/GaN heterostructure, which can explain the experiment results.     

第三族金属氧化物离子对二氧化碳转化的红外光谱研究

本文利用红外光解离光谱研究了第三族金属氧化物离子对二氧化碳分子的转化机制. 研究表明,对于[ScO(CO₂)_n]⁺体系,在n≤4时,形成了溶剂化结构;在n=5时,形成了碳酸盐结构,实现了二氧化碳的转化. 对于[YO(CO₂)_n]⁺体系,需要4个二氧化碳分子就可以实现二氧化碳的转化. 而在[YO(CO₂)_n]⁺体系中,只发现了溶剂化结构,没有观察到碳酸盐结构. 理论计算表明,[YO(CO₂)_n]⁺体系拥有最小的溶剂化结构向碳酸盐结构转化能垒,[LaO(CO₂)_n]⁺体系拥有最大的溶剂化结构向碳酸盐结构转化能垒. 本文从分子水平揭示了不同金属氧化物离子对二氧化碳分子转化的影响规律.     

CGNS API和FVM在非结构混合网格计算中的应用

用CGNS API（CFD General Notation System Application Programming Interface）作为非结构混合网格求解器的前处理和后处理,用FVM（Finite Volume Method）作为偏微分方程求解方法．在前处理过程中,用hash表法对内部网格面和边界网格面进行编号,并计算出相应的几何信息,以满足FVM求解器的需要．从FVM求解器计算出来的各种场信息可以写入原来的CGNS文件,该文件可以被许多专业商业后处理软件（如Tecplot,Fluent,CFX等）读取和进行可视化;对于求解器,用基于网格中心的FVM及SIMPLEC（Semi Implicit Methodfor Pressure Linked Equation Consistent）方法求解压力速度耦合．最后给出两个说明算例．     

HL-2M 装置运行控制技术初步研究

重点介绍了 HL-2M 装置的运行技术和初步的等离子体控制实验结果,包括等离子体放电方案设计、 线圈电流控制、击穿阶段零场匹配和等离子体电流以及位移的控制。为了降低放电运行风险,HL-2M 装置初始放 电采用了简化的放电方案,通过整定 PID 参数实现了线圈电流控制,在击穿阶段获得了 10V 以上的环电压和较大 范围的零场区域,成功实现等离子体击穿。最后,投入了等离子体电流和水平位移反馈控制算法,成功将等离子 体放电脉宽提升至 200ms 以上,且维持 I_p≥100kA 的时间超过了 100ms,上述结果表明 HL-2M 装置运行控制技术 得到了初步的检验。      

Efficient and stable wireless power transfer based on the non-Hermitian physics

As one of the most attractive non-radiative power transfer mechanisms without cables,efficient magnetic resonance wireless power transfer(WPT)in the near field has been extensively developed in recent years,and promoted a variety of practical applications,such as mobile phones,medical implant devices and electric vehicles.However,the physical mechanism behind some key limitations of the resonance WPT,such as frequency splitting and size-dependent efficiency,is not very clear under the widely used circuit model.Here,we review the recently developed efficient and stable resonance WPT based on non-Hermitian physics,which starts from a completely different avenue(utilizing loss and gain)to introduce novel functionalities to the resonance WPT.From the perspective of non-Hermitian photonics,the coherent and incoherent effects compete and coexist in the WPT system,and the weak stable of energy transfer mainly comes from the broken phase associated with the phase transition of parity-time symmetry.Based on this basic physical framework,some optimization schemes are proposed,including using nonlinear effect,using bound states in the continuum,or resorting to the system with high-order parity-time symmetry.Moreover,the combination of non-Hermitian physics and topological photonics in multi-coil system also provides a versatile platform for long-range robust WPT with topological protection.Therefore,the non-Hermitian physics can not only exactly predict the main results of current WPT systems,but also provide new ways to solve the difficulties of previous designs.     

基于数学形态学的表面原子熔融相的 STM图像识别算法

高温扫描隧道显微镜(HT-STM)可以实时原位地捕捉到表面原子的熔化相变过程.在这一原位变温实验中,快速可靠地识别出每帧STM图像中的熔融相十分关键.传统的手工统计方法存在效率低下、随意性大等问题.我们发展出一套基于数学形态学的算法,来自动快速地识别.与人工方法相比,该算法消除了人为主观误差,使确定的边界更加准确、光滑,处理效率提高了266倍.     

Defect-induced failure of optical coating filters

Optical filters composed of Ag, Al₂O₃, and ZnSe films were prepared on BK7 substrates by evaporation. By employing spectrophotometer, microscope, scanning electron microscope (SEM), and energy dispersive spectrum (EDS) analysis, the moisture-dependent stability of the samples was tested. The experimental results revealed that filter failure often occurs initially at defect sites. Small sputtering particles and pinhole are found to be two types of defects that induced the optical coating filter failure. The mechanisms of the defect-induced failure of the filters also are discussed in the article.     

二维顶盖驱动半圆腔内流动MRT-LBM研究

本文采用多弛豫时间格子玻尔兹曼方法(multi relaxation time lattice Boltzmann method—MRT LBM)对二维顶盖驱动半圆腔内流动进行了数值模拟,得到了雷诺数为500～50000范围内半圆腔内流场分布情况。在二维顶盖驱动半圆腔流场中,随雷诺数的增大,流场内旋涡的数目逐渐增加,且流动依次呈现出稳定流、周期流、混沌流等状态。本文计算结果表明,MRT-LBM模型可显著提高计算的稳定性,适用于大范围的雷诺数流动情况。     

Improvement of characteristics of an InGaN light-emitting diode by using a staggered AlGaN electron-blocking layer

The optical and physical properties of an InGaN light-emitting diode (LED) with a specific design of a staggered AlGaN electron-blocking layer (EBL) are investigated numerically in detail. The electrostatic field distribution, energy band, carrier concentration, electroluminescence (EL) intensity, internal quantum efficiency (IQE), and the output power are simulated. The results reveal that this specific design has a remarkable improvement in optical performance compared with the design of a conventional LED. The lower electron leakage current, higher hole injection efficiency, and consequently mitigated efficiency droop are achieved. The significant decrease of electrostatic field at the interface between the last barrier and the EBL of the LED could be one of the main reasons for these improvements.