微柱高效液相色谱与火焰光度检测器联用研究

报道了微柱高效液相色谱（micro-column HPLC）与火焰光度检测器（FPD）在线联用系统的研究,目的是发展一种不经复杂前处理步骤即可直接测定有机锡化合物的方法。三丁基锡氯化物（TBT）等经HPLC微柱分离后,通过毛细管连接引入特制的燃烧头,通过火焰光度检测器进行检测,对系统有关参数进行了优化和讨论。所建方法可以直接测定各种水样中的三丁基锡氯化物。     

Theoretical identification of the lowest-energy structure of (SiC)12 heterocluster: Segregation of C and Si in planar and cage structures

The structures and relative stabilities of various plane and cage isomers of (SiC)₁₂ cluster have been systematically computed using density functional theory at the level of BLYP. A number of starting configurations were generated from the low-energy isomers of C₂₄ cluster via replacing 12 C atoms by Si atoms, which are D_6h planar structure, and the D_6d, D_2h, O_h, and D_4h symmetrical fullerene cages. The heterofullerene cage obeying six isolated squares rules are not the most preferred structural motif for (SiC)₁₂ cluster. The structural candidates with fully alternating Si–C arrangement are energetically unfavorable. Instead, the (SiC)₁₂ cluster tend to adopt plane, bowl, saddle, and highly distorted cage structures. In all cases, segregation of C atoms is a common feature.     

Synergistic effects of functionalized graphene and functionalized multi-walled carbon nanotubes on the electrical and mechanical properties of poly(ether sulfone) composites

Mixed fillers composed of functionalized graphene (f-G) and functionalized multi-walled carbon nanotubes (f-CNTs) (f-G-f-CNTs) were prepared and their synergistic effects in terms of enhancing the electrical conductivity and tensile modulus of poly(ether sulfone) (PES) composites were investigated. The results indicate that the electrical conductivity of the 5 wt% f-G-f-CNTs(W_f-G/W_f-CNTs = 1:1)/PES composite was 2.2 times higher than that of the 5 wt% f-G/PES composite and 8.9 times higher than that of the 5 wt% f-CNTs/PES composite. Moreover, the tensile modulus of the 5 wt% f-G-f-CNTs(W_f-G/W_f-CNTs = 1:1)/PES composite relative to that of the 5 wt% f-G/PES composite and 5 wt% f-CNTs/PES composite increased by 16.5% and 50.6%, respectively. Additionally, enhancements in the electrical conductivity and tensile modulus of the PES composite depended on the weight ratio of f-G and f-CNTs in the mixed fillers. The electrical conductivity and tensile modulus exhibited maximum values when the weight ratios of f-G and f-CNTs were 1:3 and 1:1, respectively. When the weight ratio of f-G and f-CNTs was fixed at 1:1, the f-G-f-CNTs(W_f-G/W_f-CNTs = 1:1)/PES composite showed a percolation threshold of 0.22 vol%, much lower than that of the f-G/PES composite.     

Micelle-like particles based on self-assembly of rod-like FPEEK and coil-like PVA

The self-assembly of a rod-like polymer [hydroxyl-terminated trifluoromethylphenyl-substituted fluorinated poly(ether ether ketone) (FPEEK)] and a coil-like polymer (polyvinyl alcohol, PVA) in water has been studied. It was found that this polymer pair could form micelle-like particles. Hydrogen bonding between the hydroxy groups of rod-like FPEEK and coil-like PVA, and parallel packing of the rod-like FPEEK are the main factors affecting the formation of micelle-like particles. Over a broad range, when the FPEEK/PVA mass ratio or the tetrahydrofolate/H₂O volume ratio is decreased, the diameter of micelle-like particles is decreased. The diameters (around 250 nm) of micelle-like particles measured by scanning electron microscopy and dynamic light scattering are similar, but are different from that measured by transmission electron microscopy (around 150 nm). Thus, it can be concluded that micelle-like particles have a core–shell structure and the cores of micelles are composed of FPEEK, and that the shells of micelles are composed of PVA. When polyethylene glycol was used instead of PVA, micelle-like particles were also formed, but the average diameter was bigger than that of the particles formed by PVA and FPEEK. This work was supported by the National Nature Science Foundation of China (50203004).     

纳米银的神经毒理学效应

纳米银是目前商品化程度最高的纳米材料之一。由于其独特的表面等离子共振性能、优良的抗菌活性,这种纳米材料已被广泛地应用于医药卫生、工业及日常生活等多个领域。随着纳米银应用领域的不断扩展,其生物安全性也受到了越来越多的关注。由于纳米银能够通过跨越血脑屏障等途径进入生物体脑部,因此纳米银的神经毒理学效应受到广泛关注,近年来已成为该领域研究热点之一。本综述总结了纳米银的脑累积效应以及进入脑组织的途径,主要包括经鼻通过嗅神经直接入脑和穿透血脑屏障。纳米银的神经毒性效应包括受暴露动物体的神经行为学改变、脑部的组织病理学效应或神经元和神经胶质细胞的形貌变化,与神经递质水平改变内在作用机制与氧化应激和炎性反应相关。纳米银的粒径、表面涂层和银离子释放是影响纳米银神经毒性的关键因素。本文最后提出当前纳米银神经毒理学研究中存在的问题及今后的研究方向。     

六氯丁二烯分析方法研究进展

六氯丁二烯是一种持久性有机污染物,于2015年和2017年分别被列入《斯德哥尔摩公约》附件A和附件C的受控污染物名单中。六氯丁二烯的来源、环境赋存和影响等研究对控制该新增受控持久性有机污染物污染具有重要意义,而灵敏可靠的六氯丁二烯分析方法是开展相关研究的前提和基础。近年来已有不少学者将六氯丁二烯作为分析目标物之一进行了检测或方法学研究。基于这些研究成果,该文综述了六氯丁二烯分析方法的研究进展,其中重点介绍了空气、水体、土壤、污泥、生物组织等多种介质中六氯丁二烯的样品前处理方法,并比较了各方法的优缺点,以期为该领域的进一步研究提供参考。空气中六氯丁二烯主要由泵抽气通过吸附管而采集,再经热脱附后进行仪器分析,检出限在ng/m³水平。也有研究应用聚氨酯泡沫被动采样器和吸附剂填充聚氨酯泡沫被动采样器采集大气中六氯丁二烯及其他污染物。基于吸附剂填充聚氨酯泡沫被动采样器的分析方法灵敏度较高,其对六氯丁二烯的检出限低至0.03 pg/m³。然而目前被动采样体积仅根据六氯丁二烯的log K_OA系数估算,未来仍需进一步实验校正。水体样品前处理通常也较简单,通过吹扫捕集、液-液萃取或固相萃取目标物后进行仪器分析。固相萃取法能够同步实现目标物的提取、净化和浓缩,在水样中六氯丁二烯分析方面具有明显优势。固相萃取柱类型以及干燥步骤中柱中残留水分去除率均会影响六氯丁二烯的回收率。灰尘、土壤、沉积物、污泥和生物组织等固体介质样品基质最为复杂,需联合多种方法进行前处理。固体样品中六氯丁二烯提取方法包括索氏提取,加速溶剂萃取和超声萃取,其中超声萃取法应用最为广泛。固体基质净化方面主要采用层析柱色谱法,多根净化柱联用或多层复合柱能够提升净化效果。仪器分析方面,六氯丁二烯主要采用气相色谱和质谱联用检测,高性能质谱检测器如串联质谱能够大大提高六氯丁二烯的检测灵敏度,具有较大的应用潜力。     

Preparation of a biochip on porous silicon and application for label-free detection of small molecule-protein interactions

A new approach for the preparation of a biochip on porous silicon and the application of the biochip for detection of small molecule-protein interactions with desorption/ionization on porous silicon (DIOS) was demonstrated. The galvanostatically etched porous silicon substrates were chemically modified firstly to yield carboxylic acid terminated surfaces, and then the protein was covalently attached to the surface through amide bonding. By applying a solution of candidate chemicals to the surface and a subsequent wash step, the masses of captured compounds could be analyzed by DIOS. DIOS has advantages of being a direct detection tool compared to the classic fluorescence or chemiluminescence methods, because the process of labeling molecules employed in the fluorescence or chemiluminescence methods can sometimes alert the properties of the labeled molecule. The recognition between proteins and their binding partners is efficient and selective. A good tolerance to disturbance and high enrichment factor of the biochip to the analytes was observed. As an on-chip-based approach, the demonstrated method has a potential to perform in a high-throughput format.