Doppler cooling a single Ca+ ion with a violet extended-cavity diode laser

We present a scheme for employing a violet extended-cavity diode laser in experiments with single, trapped ions. For this the grating-stabilised laser is spatially and spectrally filtered and referenced to a Fabry–Pérot cavity. We measure an upper limit to the line width by observing a 305-kHz FWHM beat note with the second harmonic of a titanium sapphire laser. The laser is subsequently used to optically cool a single ⁴⁰Ca⁺ ion close to the Doppler limit. PACS 03.67.Lx; 32.80.Pj; 42.55.Px     

Characterization of Metallo Bis(terpyridine) Diblock Polymers by Nonaqueous Capillary Zone Electrophoresis

A method of nonaqueous capillary zone electrophoresis (CZE) has been developed to characterize block (co)polymers of poly(ethylene oxide) and poly(styrene) containing metallo bis(terpyridine) complexes as bridging units. Specific CZE separation conditions had to be applied, with barium perchlorate dissolved in N-methylformamide (NMF) as background electrolyte and OV-1701-OH deactivated capillaries. For detection UV absorption was measured at a wavelength of 316 nm. Metallo diblock polymers with molecular weights up to 30,000 Da could be analyzed by the proposed nonaqueous CZE method. Experiments performed with polymeric compounds containing Fe, Ni or Ru as central metal ions showed that their electrophoretic mobilities were independent of the type of metal ion. Therefore, the data on the size of the polymeric compounds could be obtained using just one set of calibration standards. Polydispersities of the samples calculated from the experimental results were in correlation with the polydispersities of the polymers used in the synthesis of the metallo diblock polymers. Several polymeric samples contained metallo mono(terpyridine) complexes as impurities. These by-products could be separated from the main product. With symmetrical diblock polymers only one by-product was detected, while with an asymmetric diblock polymer two types of mono-complexes were found. The amount of the mono-complexes present as impurities was dependent on the type of central metal ion (Ni > Fe >> Ru).     

Microstructural assessment of InN-on-GaN films grown by plasma-assisted MBE

The structural properties of InN thin films, grown by rf plasma-assisted molecular beam epitaxy on Ga-face GaN/Al₂O₃(0001) substrates, were investigated by means of conventional and high resolution electron microscopy. Our observations showed that a uniform InN film of total thickness up to 1 μm could be readily grown on GaN without any indication of columnar growth. A clear epitaxial orientation relationship of , was determined. The quality of the InN film was rather good, having threading dislocations as the dominant structural defect with a density in the range of 10⁹–10¹⁰ cm⁻². The crystal lattice parameters of wurtzite InN were estimated by electron diffraction analysis to be a=0.354 nm and c=0.569 nm, using Al₂O₃ as the reference crystal. Heteroepitaxial growth of InN on GaN was accomplished by the introduction of a network of three regularly spaced misfit dislocation arrays at the atomically flat interface plane. The experimentally measured distance of misfit dislocations was 2.72 nm. This is in good agreement with the theoretical value derived from the in-plane lattice mismatch of InN and GaN, which indicated that nearly full relaxation of the interfacial strain between the two crystal lattices was achieved.     

Bestmögliche innere Schalengleichungen für schubweiche Werkstoffe unter Berücksichtigung von Dickenänderungen

Übersicht Konsistente Schalentheorien lassen sich in einer besonders anschaulichen Weise durch lineare Approximation der Erhaltungssätze eines als Multi-Direktor-Körper beschriebenen, dreidimensionalen Kontinuums herleiten. Im vorliegenden Beitrag entstchen auf diesem Wege bestmögliche, in Geschwindigkeiten formulierte innere Schalengleichungen für beliebig große Deformationen und willkürliche, in eine Leistungsaussage einpaßbare Materialgesetze. Dabei finden Schub- und Querdeformationen Berücksichtigung. Der optimale Charakter der Schalentheorie mit gleichen Unschärfen in allen Einzelbeziehungen wird durch den Herleitungsgang sichergestellt und durch Einschrankungen mittels lokaler Tensornormen bewiesen.

---

Best interior shell equations including transverse shear deformations and thickness changes

Summary Consistent shell theories can be derived in a particular correct manner by linear approximation of conservation laws of a three-dimensional continuum, described as a multi-director-body. In the present paper best interior shell equations-formulated in velocities—are developed, valid for arbitrarily large deformations and rather optional material laws, incorporating shear distorsions and thickness changes. The optimal character of the theory is guaranteed by the derivation process and proven by bounding techniques using tensor norms.

     

On the retrograde condensation of one or two liquids

This contribution discusses the phenomena of retrograde condensation of one or two liquids. It w1 be shown that both phenomena can be well understood. Also the relation of retrograde condensation of one liquid phase with the condensation behavior of natural gas will be discussed. Similarly that of two liquid phases with multiple phase behavior occurring in low temperature reservoir fluids will be pointed out.     

Influence of cultivation conditions on the production of cellulolytic enzymes withTrichoderma reesei Rutgers C30 in aqueous two-phase systems

Cellulolytic enzyme production in aqueous two-phase systems withTrichoderma reesei Rutgers C30 has been investigated. The influ ence of different phase systems, as well as addition of media compo nents and substrate on enzyme production have been studied. Extractive enzyme production in fed-batch cultivations was per formed in a phase system composed of PEG 8000 5%-Dextran T500 7% with 1% Solka-Floc BW 200 as substrate. The cellulolytic enzyme system was intermittently withdrawn with the top phase. Addition of media components every 24 h and cellulose every 72 h gave an aver age enzyme activity in the withdrawn top phase of 2.2 FPU/mL dur ing 170 h cultivation. The corresponding productivity was 18 FPU/lh. The productivity was increased to 24 FPU/l.h when media compo nents and cellulose were added every 72 h. The average enzyme con centration was then 1.6 FPU/mL. The results are discussed in relation to methods for cellulolytic enzyme production involving immobiliza tion and cell recycling.     

Optical spectra and laser-induced dissociation of supported Na particles

This paper reports new results on the optical spectra of Na particles and on laser-induced photodissociation of Na atoms from the surface of these particles. In continuation of our earlier studies we have performed experiments to elucidate the mechanism of thenonthermal dissociation process. Furthermore, theoretical calculations have been carried out with the goal to correlate the wavelength dependence of the photodissociation yield with the optical absorption spectra of the metal particles. In addition, manipulation of the size distribution of metal particles on supports is outlined as an application of the effect. This allows for the preparation of very special surfaces with novel physical and chemical properties.