Integrating Time-Resolved Imaging Information by Single-Luminophore Dual Thermally Activated Delayed Fluorescence

The fact that the lifetime of photoluminescence is often difficult to access because of the weakness of the emission signals, seriously limits the possibility to gain local bioimaging information in time-resolved luminescence probing. We aim to provide a solution to this problem by creating a general photophysical strategy based on the use of molecular probes designed for single-luminophore dual thermally activated delayed fluorescence (TADF). The structural and conformational design makes the dual TADF strong in both diluted solution and in an aggregated state, thereby reducing sensitivity to oxygen quenching and enabling a unique dual-channel time-resolved imaging capability. As the two TADF signals show mutual complementarity during probing, a dual-channel means that lifetime mapping is established to reduce the time-resolved imaging distortion by 30–40 %. Consequently, the leading intracellular local imaging information is serialized and integrated, which allows comparison to any single time-resolved signal, and leads to a significant improvement of the probing capacity.     

Synthesis and thermal behavior of 4,5-dihydroxyl-2-(dinitromethylene)-imidazolidine (DDNI)

A novel energetic material, 4,5-dihydroxyl-2-(dinitromethylene)-imidazolidine (DDNI), was synthesized by the reaction of FOX-7 and glyoxal in water at 70 °C. Thermal behavior of DDNI was studied with DSC and TG-DTG methods, and presents only an intense exothermic decomposition process. The apparent activation energy and pre-exponential factor of the decomposition reaction were 286.0 kJ mol⁻¹ and 10^31.16 s⁻¹, respectively. The critical temperature of thermal explosion of DDNI is 183.78 °C. Specific heat capacity of DDNI was studied with micro-DSC method and theoretical calculation method, and the molar heat capacity is 217.76 J mol⁻¹ K⁻¹ at 298.15 K. The adiabatic time-to-explosion was also calculated to be a certain value between 14.54 and 16.34 s. DDNI presents lower thermal stability, for its two ortho-hydroxyl groups, and its thermal decomposition process becomes quite intense.     

热处理对La0.63Gd0.2Mg0.17Ni3.1Co0.3Al0.1储氢合金微观组织和电化学性能的影响

在氩气气氛和1173 K保温条件下对La0.63 Gd0.2 Mg0.17Ni3.1 Co0.3 Al0.1储氢合金进行不同时间(t=8 ～168 h)的热处理,采用电感耦合等离子发射光谱(ICP)、X射线衍射(XRD)、电子探针显微分析方法(EPMA)和电化学测试分析方法对比研究了退火时间对合金显微组织演化和电化学性能的影响.研究结果表明,铸态合金组织由Ce2 Ni7型、Gd2Co7型、Pr5 Co19型、PuNi3型和CaCu5型相组成,其Ce2 Ni7型相的丰度为78.9％,随退火时间的延长,退火合金中Ce2 Ni7型相的丰度逐渐增加,当退火时间t=168 h时其相丰度达到94.5％,Ce2 Ni7型相结构的晶胞参数和晶胞体积随退火时间增加而减小.电化学测试分析表明,退火合金电极的电化学性能与Ce2 Ni7型相的丰度有密切关系,退火时间对合金电极的活化性能影响不大,但合金电极放电容量随退火时间的延长逐渐提高,当t=168 h时,合金电极放电容量达到最大值386.8mAh·g-1;退火时间对合金电极循环稳定性的提高和改善有不同程度的影响,当退火时间t=16～168 h时,经100次充放电循环后,其电极容量保持率S100=90.3％～91.5％.热处理能有效改善合金电极电化学反应的动力学性能,但不同退火时间对合金电极的高倍率放电性能影响不明显.     

The catalytic activity of Zn(II) and Mn(II) organometallic complexes

Zn(II) and Mn(II) organometallic complexes I and II were first used to catalyze the cyanosilylation reaction, and good catalytic results (24–99 %) were achieved. The catalytic activity of the complexes was determined by ¹H NMR.     

A glassy carbon electrode modified with poly(eriochrome black T) for sensitive determination of adenine and guanine

A thin film of poly(eriochrome black T) was deposited on the surface of glassy carbon electrode by cyclic voltammetry, and this system is shown to enable the sensitive determination of adenine (A) and guanine (G). Scanning electron microscopy, Fourier transform infrared spectroscopy and electrochemical impedance spectroscopy were carried out to characterize the film which exhibits excellent electrocatalytic activity toward the oxidation of A and G in 0.1 M phosphate buffer solution (pH 4.0). Square wave voltammetry reveals an oxidation peak at 1084 mV whose current is linearly related to the concentration of A in the range from 0.05 to 1.00 μM. The oxidation peak for G occurs at 788 mV, and its current is linearly related to the concentration of G in the range from 0.025 to 1.00 μM. The detection limits are 0.017 μM for A and 0.008 μM for G (at S/N?=?3), respectively. The modified electrode displays good reproducibility and selectivity for the determination of A and G. The sensor was applied to quantify A and G in fish sperm DNA with satisfactory results.

Surfacial carbonized palygorskite as support for high-performance Pt-based electrocatalysts

Pt nanoparticles deposited on a low-cost, surfacial, carbonized palygorskite (Pt/C-PLS) prepared by carbonizing sucrose were evaluated as a methanol oxidation catalyst for direct methanol fuel cells. Transmission electron microscopy and Fourier transfrom infrared spectrophotometry analyses revealed that carbon was formed on the surface of PLS and that free silica presented in the C-PLS support. The catalytic activity of methanol oxidation of Pt/C-PLS was higher than that of Pt/C, and the former catalyst had better CO tolerance.     

Preparation of graphene platelet-Ru(phen) 3 2+ assemblies and their application in electrochemiluminescence detection

Graphene platelet (GP)-Ru(phen) ₃ ²⁺ assembles have been prepared through self-assembly of poly sodium styrenesulfonate (PSS) functionalized GPs and Ru(phen) ₃ ²⁺ driven by electrostatic attraction interactions in aqueous solution. The resultant assembled GP-Ru(phen) ₃ ²⁺ hybrid structure modified electrode exhibits excellent electrochemiluminescence (ECL) behaviors because of the ECL active species Ru(phen) ₃ ²⁺ contained therein.     

微波处理和溶胶凝胶法共同改性废胶粉及其与天然橡胶复合材料性能的研究

采用微波处理打断废胶粉(WRP)的三维网状结构用来提高WRP在有机溶剂中的溶胀性,然后采用溶胶凝胶法,将微波改性后的WRP浸入正硅酸乙酯中,通过水解反应和缩合反应,在WRP表面原位生成SiO2网络,从而制得改性废胶粉(MWRP).将制得MWRP与天然橡胶(NR)共混,制备了NR/MWRP复合材料,研究了NR/MWRP复合材料的性能.通过热重分析仪、差示扫描量热仪和力学分析表明微波处理最佳时间是20 s.由于微波处理提高了NR与WRP的相容性,原位生成的SiO2粒子起到了补强作用,所以所制备的NR/MWRP复合材料拥有较好的力学性能;随着Si69的加入,抑制了SiO2粒子聚集,提高了SiO2粒子的分散性,从而进一步提高复合材料的力学性能并降低复合材料的Payne效应;在进行频率扫描时,硫化胶的储存模量随频率的增大而增大;硫化胶的温度扫描结果表明,随着温度的升高,复合材料中SiO2粒子聚集程度加剧并且复合材料出现老化的现象.为了提高复合材料的耐老化性能,N,N-间苯撑双马来酰亚胺(BMI)作为一种防老剂加入复合材料中,BMI利用Diels-Aider反应补偿橡胶在老化过程中所损失的交联键并提高NR与WRP的界面相容性,从而提高复合材料的耐老化性能.     

热力学变化过程方向的完整判据

目前物理化学教科书中的自发过程方向与限度判据,只能对常见自发过程作判断,不能对含有非体积功的各类过程做出判断。笔者从热力学第二定律的理论基础克劳修斯不等式入手,通过自发变化熵判据的演绎过程,找到了3个判据不完整性的原因所在,给出了完整方向性判据的解决方案。应用表明,完整的方向与限度判据可适用于各类热力学变化过程。     

Study of defect sites in Ce1-xMxO2-δ (x = 0.2) solid solutions using Raman spectroscopy

A series of Ce(1-x)M(x)O(2-δ) (M = Gd, Zr, La, Sm, Y, Lu, and Pr) samples were characterized by Raman spectroscopy to investigate the evolution of defect sites (oxygen vacancies and MO(8)-type complex) and their distributions in the samples. It was found that the evolution of oxygen vacancies was due to the different ionic valence state of dopant from that of Ce(4+), while the evolution of the MO(8)-type complex was due to the different ionic radius of dopant from that of Ce(4+). The distributions of defect sites were investigated using 325 and 514 nm excitation laser lines, indicating that the defect sites were surface enriched. Moreover, the increasing ordering level of the sample led to a decline in the concentration of the MO(8)-type complex in the sample but the constant concentration of oxygen vacancies, implying that the metastable MO(8)-type complex species were more disordered compared to the oxygen vacancies.