Fast atom bombardment induced ring rupture of silatranes

During a comparison study of the fast atom bombardment (FAB) and electron impact mass spectra of 1-organyl-2,9,10-trioxa-6-aza-1-silatricyclo[4.3.3.0^1,6]dodecanes, an unusual ion peak at m/z 164 was noticed in the FAB spectra. Accurate mass measurement indicated that m/z 164 corresponds to protonated 1-[N,N-bis(2-hydroxyethyl)amino]-1-propanol (BHAP), which is produced by a ring-rupture reaction. Further experiment showed that the intensity of the [BHAP + H]⁺ ion peak increased markedly as the 7keV Ar⁰ bombardment proceeded, suggesting a FAB-induced reaction. The possible mechanism is also discussed.     

吲哚化合物绿色高效的硫氰酸化反应

本文报道了在温和绿色的条件下,以过氧化氢(H₂O₂)作为氧化剂,进行吲哚化合物区域选择性硫氰酸化反应。结果表明：该反应体系中,无论是氮取代吲哚还是游离氨基吲哚均可获得较高的产率。产物2a～2o的结构经¹H NMR和¹³C NMR表征。该方法的主要特点是反应条件温和,反应时间短,产率高。     

碳纳米纤维吸附储氢性能分析

文中综合碳纳米纤维微观结构的表征结果以及氢吸脱附等温线的实验测量结果,对碳纳米纤维的吸附储氢性能进行了综合分析,分析发现:比表面积和中孔容积均与氢吸附量成线性关系;微孔容积对材料吸附性能影响较大,微孔容积与氢吸附量成抛物线关系;氢在常温左右以及77K下的吸附等温线呈现超临界气体的吸附特征,氢在273K和353K下的吸脱附等温线也基本重合,呈现的是物理吸附的特征。实验结果还说明:常温左右,甚至是77K下,碳纳米纤维均不适合于氢的吸附储存。     

冰盘管密度对蓄冷槽取冷特性影响的实验研究

通过构建高密度直接蒸发式冰盘管实验台,研究了不同冰盘管密度对取冷特性的影响。实验结果表明:随着蓄冷槽中冰盘管密度的增大,可使直接蒸发式蓄冰槽取冷水温进一步降低,取冷速率进一步提高,从而能更好地满足低温送风空调系统的要求及空调高峰负荷变化的需要。     

基于摩擦磨损的KDP晶体固结磨料抛光垫优化

本文通过固结磨料球与KDP晶体对磨的单因素试验探究固结磨料球中反应物种类、磨粒浓度、反应物浓度、基体硬度对摩擦系数、磨痕截面积和磨痕处粗糙度的影响,试验结果表明:KHCO₃固结磨料球对磨后磨痕对称性好,磨痕处的粗糙度值低;磨痕截面积随磨粒和反应物浓度的增加而增大,随基体硬度的增大而降低;磨痕处粗糙度随磨粒和反应物浓度的增加先降低后上升,随基体硬度的增大先上升后降低;摩擦系数受磨粒和反应物浓度影响不明显,随基体硬度的增大而降低。选择KHCO₃作为反应物,Ⅰ基体,磨粒浓度为基体质量的100%,反应物浓度为15%制备固结磨料球与KDP晶体对磨后的磨痕轮廓对称度好且磨痕处粗糙度值低,以该组分制备固结磨料垫干式抛光KDP晶体,可实现晶体表面粗糙度Sa值为18.50 nm,材料去除率为130 nm/min的高效精密加工。     

Photo-induced synthesis and in vitro biological activity of a Sansalvamide A analog

Photoinduced single electron transfer (SET) cyclization processes for synthesis of a Sansalvamide A analog containing double pharmacophores (cyclicpeptides and O-phthalimide moiety) is described to develop novel antitumor cyclopeptide drug. The resultant compound is active in drug-sensitive HeLa, HepG-2 and MCF-7 cell lines. Specifically, the title compound was found to inhibit MCF-7 cells with an IC₅₀ value of 15 μM (13.4 μg/mL), which may serve as a potential candidate for antitumor drug development.     

Fractionation of phosphopeptides on strong anion‐exchange capillary trap column for large‐scale phosphoproteome analysis of microgram samples

It is one of the key issues to develop powerful fractionating method to increase the identification of the low‐abundance phosphopeptides. In this study, a semi‐online 2‐D LC separation strategy based on three‐step fractionation of the enriched peptides on strong anion‐exchange trap column was developed. It was demonstrated that the sensitivity and phosphoproteome coverage obtained by this fractionating method with strong anion‐exchange trap column is much higher than those by the conventional methods based on C18 trap column. In addition, when the same amount of sample was loaded, the number of identified phosphopeptides had increased 108%. Combination of this three‐step fractionation method with RPLC‐MS/MS analysis by 300 min RP‐gradient separation was applied to phosphoproteome analysis of human liver proteins, and 853 unique phosphopeptides was positively identified from 500 μg tryptic digest of human liver proteins. After three cycles' consecutive analyses, 1554 unique phosphopeptides and 1566 phosphorylated sites were totally identified from 735 phosphorylated proteins at a false discovery rate of <1% in about 54 h of analysis time.     

Study on inverse taper based mode transformer for low loss coupling between silicon wire waveguide and lensed fiber

We have simulated the coupling loss of three types of Inverse Taper and taper-lensed fiber using three dimensional (3D) semi-vectorial beam propagation methods (BPM) respectively. Our results showed that the performances of exponential inverse taper and quadratic inverse taper were better than the commonly used linear inverse taper. Especially, for TM mode the improvement in the reduction of devices size is 53% and 136% for exponential and quadratic inverse taper compared with the linear inverse taper.     

微通道换热器在制冷空调系统中的应用分析

2010年6月1日实施的新能耗标准进一步推动了制冷空调行业的升级,微通道换热器以其体积小、重量轻、结构紧凑、耐高压、热阻低、换热效果好等特点开始逐步在汽车制冷空调系统、家用和商用制冷空调系统中得以应用.然而,国内在该领域的研究比国外起步晚,理论和实验研究都比较缺乏.文中对微通道换热器在制冷空调系统中的应用研究进行了总结...     

不含三角形图的正常染色路和正常染色圈

图G为边染色图,对G中的任一顶点v,定义v的色度dc（v）：G中与顶点v相关联的边中不同染色的数目.用δc（G）表示图G的最小色度,即δc（G）=min{dc（v）：v∈G}.若图G为不含三角形的边染色图,且δc（G）≥2,则G含长为4d-2的正常染色路或长至少为2d-2的正常染色圈.