Determination of 241Am in Environmental Samples: A Review

The determination of ²⁴¹Am in the environment is of importance in monitoring its release and assessing its environmental impact and radiological risk. This paper aims to give an overview about the recent developments and the state-of-art analytical methods for ²⁴¹Am determination in environmental samples. Thorough discussions are given in this paper covering a wide range of aspects, including sample pre-treatment and pre-concentration methods, chemical separation techniques, source preparation, radiometric and mass spectrometric measurement techniques, speciation analyses, and tracer applications. The paper focuses on some hyphenated separation methods based on different chromatographic resins, which have been developed to achieve high analytical efficiency and sample throughput for the determination of ²⁴¹Am. The performances of different radiometric and mass spectrometric measurement techniques for ²⁴¹Am are evaluated and compared. Tracer applications of ²⁴¹Am in the environment, including speciation analyses of ²⁴¹Am, and applications in nuclear forensics are also discussed.     

6H-SiC衬底片的表面处理

相比于蓝宝石,6H-SiC是制作GaN高功率器件更有前途的衬底.本文研究了表面处理如研磨、化学机械抛光对6H-SiC衬底表面特性的影响.用显微镜、原子力显微镜、拉曼光谱、卢瑟福背散射谱表征了衬底表面.结果表明经过两步化学机械抛光后提高了表面质量.经第二步化学机械抛光后的衬底具有优异的表面形貌、高透射率和极小的损伤层,其表面粗糙度RMS是0.12nm.在该衬底上用MOCVD方法长出了高质量的GaN外延膜.     

Preparation of nano-hydroxyapatite/poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactide) biocomposite microspheres

Nano-hydroxyapatite (HA)/poly(l-lactide) (PLLA) composite microspheres with relatively uniform size distribution were prepared by a solid-in-oil-in-water (s/o/w) emusion solvent evaporation method. The encapsulation of the HA nanopaticles in microshperes was significantly improved by grafting PLLA on the surface of the HA nanoparticles (p-HA) during emulsion process. This procedure gave a possibility to obtain p-HA/PLLA composite microspheres with uniform morphology and the encapsulated p-HA nanoparticle loading reached up to 40 wt% (33 wt% of pure HA) in the p-HA/PLLA composite microspheres. The microstructure of composite microspheres from core-shell to single phase changed with the variation of p-HA to PLLA ratios. p-HA/PLLA composite microspheres with the diameter range of 2–3 μm were obtained. The entrapment efficiency of p-HA in microspheres could high up to 90 wt% and that of HA was only 13 wt%. Surface and bulk characterizations of the composite microspheres were performed by measurements such as wide angle X-ray diffraction (WAXD), thermal gravimetric analysis (TGA), environmental scanning electron microscope (ESEM) and transmission electron microscopy (TEM).     

流动注射-化学发光法定量测定同一水域中的腐殖酸

采用流动注射-化学发光(FI-CL)这一灵敏的检测方法,通过条件实验与参数优化,优选了测定环境中痕量多羟基酚类化合物的发光体系,通过考察天然水体中的腐殖酸对化学发光-多羟基酚测定体系的影响,为来自于水及土壤中的实际样品中腐殖酸的检测提供了参考,建立了同一区域水体中腐殖酸的化学发光定量测定方法。 所得线性回归方程y=70.36x+540.1,相关系数r=0.995 4,线性范围为3～15 mg·L-1,检测限为0.749 mg·L-1,HA浓度为6 mg·L-1时的相对标准偏差(RSD)为1.08%。     

Spectroscopic fingerprints of valence and spin states in manganese oxides and fluorides

We performed a systematic study of soft X-ray absorption spectroscopy in various manganese oxides and fluorides. Both Mn L-edges and ligand (O and F) K-edges are presented and compared with each other. Despite the distinct crystal structure and covalent/ionic nature in different systems, the Mn-L spectra fingerprint the Mn valence and spin states through spectral lineshape and energy position consistently and evidently. The clear O- and F-K pre-edge features in our high resolution spectra enable a quantitative definition of the molecular orbital diagram with different Mn valence. In addition, while the binding energy difference of the O-1s core electrons leads to a small shift of the O-K leading edges between trivalent and quadrivalent manganese oxides, a significant edge shift, with an order of magnitude larger in energy, was found between divalent and trivalent compounds, which is attributed to the spin exchange stabilization of half-filled 3d system. This shift is much enhanced in the ionic fluoride system. This work provides the spectroscopic foundation for further studies of complicated Mn compounds.     

The effect of drying method on the properties and nanoscale structure of cellulose whiskers

Cellulose whiskers were prepared from wood- and cotton-based microcrystalline cellulose and dried by two methods: freeze-drying or air-drying. The effect of drying method on the properties and structure of the whiskers were studied. Furthermore, the influence of the source of cellulose on the nanoscale structure was investigated. Drying method was observed to slightly influence the thermal stability of cellulose whiskers, whereas the char residue varied significantly depending on the drying process performed. Small- and wide-angle X-ray scattering and solid state nuclear magnetic resonance spectroscopy were used to examine the crystallinity and nanoscale structure of the dried whiskers. It was observed that the crystal structure and crystallinity of cellulose whiskers remained during all treatments, whereas their nanoscale structure was significantly influenced by drying method, neutralization, and source of cellulose. Relationships between thermal behavior and nanoscale structure were reported and discussed.     

DSC study of stabilizing effect of antioxidant mixtures in styrene-butadiene rubber

The type of cooperation between antioxidants in the binary mixtures of four substituted diphenylamines and phenotiazine in the stabilization of styrene-butadiene rubber has been tested. Thermooxidation of the samples has been studied by differential scanning calorimetry under non-isothermal conditions. The protection factors of the individual stabilizers and their mixtures were determined. The synergy factors were applied to asses the type of cooperation of antioxidants in the mixtures. From their values it can be concluded that the type of cooperation depends on temperature. The highest synergistic effect has been observed for the mixture of phenotiazine and [4-(1-methyl-1-phenyl-ethyl)-phenyl]-phenylamine.     

Numerical simulation for the temperature changing rule of the crude oil in a storage tank based on the wavelet finite element method

In order to study the temperature changing rule of the crude oil in the storage tank, the wavelet finite element method, the traditional finite element method and the test were used to carry out the numerical simulation. Firstly, the thermal wavelet finite element was put forward established based on thermal finite element theory and the wavelet theory. And the computational model and three boundary conditions were established. And then the temperature changing rule of the crude oil in the storage tank in 24 h for three boundary conditions was obtained by using three methods, and the results showed that the wavelet finite element method had advantages in the numerical analysis of the temperature changing rule of the crude oil in the storage. And then the temperature distribution rule of the crude oil in the storage tank under different conditions in 5 h was obtained. And the temperature changing mechanism of the crude oil was summarized finally.