X射线荧光光谱(XRF)法测定绿泥石中镁、铝、硅、磷、钾、钙、钛、铁元素含量

建立了X射线荧光光谱法测定绿泥石中镁、铝、硅、磷、钾、钙、钛、铁元素含量的快速分析方法。以标准物质及标准物质与基准试剂氧化镁、氧化钙人工混合配制标样的方法建立标准工作曲线,重点讨论了熔剂和脱模剂的选取。最佳熔样条件：采用8.0g四硼酸锂和偏硼酸锂混合熔剂(质量比67: 33)+0.8g样品并添加溴化锂作为脱模剂,熔样温度1100℃,熔样时间10min。该方法相对标准偏差(n=12)均小于5.57%,绿泥石样品测定结果与化学法一致,硅酸盐标准物质测定结果均满足不确定度要求。     

Non-covalent reconfigurable microgel colloidosomes with a well-defined bilayer shell

Microgels are extremely interfacially active and are widely used to stabilize emulsions. However, they are commonly used to stabilize oil-in-water emulsions due to their intrinsic hydrophilicity and initially dispersed in water. In addition, there have been no attempts to control microgel structural layers that are formed at the interface and as a result it limits applications of microgel in advanced materials. Here, we show that by introducing octanol into poly(N-isopropylacrylamide-co-methacrylic acid) (PNIPAM-co-MAA) microgels, octanol-swollen microgels can rapidly diffuse from the initially dispersed oil phase onto the water droplet surface. This facilitates the formation of microgel-laden interfacial layers with strong elastic responses and also generates stable inverse water-in-oil Pickering emulsions. These emulsions can be used as templates to produce microgel colloidosomes, herein termed ‘microgelsomes’, with shells that can be fine-tuned from a particle monolayer to a well-defined bilayer. The microgelsomes can then be used to encapsulate and/or anchor nanoparticles, proteins, vitamin C, bio-based nanocrystals or enzymes. Moreover, the programmed release of these substances can be achieved by using ethanol as a trigger to mediate shell permeability. Thus, these reconfigurable microgelsomes with a microgel-bilayer shell can respond to external stimuli and demonstrate tailored properties, which offers novel insights into microgels and promise wider application of Pickering emulsions stabilized by soft colloids.

Inverse W/O Pickering emulsions and reconfigurable microgelsomes with a well-defined bilayer structure are prepared from octanol-swollen PNIPAM-co-MAA microgels and the combination of binary microgels, which promise wider application of soft colloids.     

A Comprehensive Review of Rosmarinic Acid: From Phytochemistry to Pharmacology and Its New Insight

Polyphenolic acids are the widely occurring natural products in almost each herbal plant, among which rosmarinic acid (RA, C₁₈H₁₆O₈) is well-known, and is present in over 160 species belonging to many families, especially the Lamiaceae. Aside from this herbal ingredient, dozens of its natural derivatives have also been isolated and characterized from many natural plants. In recent years, with the increasing focus on the natural products as alternative treatments, a large number of pharmacological studies have been carried out to demonstrate the various biological activities of RA such as anti-inflammation, anti-oxidation, anti-diabetes, anti-virus, anti-tumor, neuroprotection, hepatoprotection, etc. In addition, investigations concerning its biosynthesis, extraction, analysis, clinical applications, and pharmacokinetics have also been performed. Although many achievements have been made in various research aspects, there still exist some problems or issues to be answered, especially its toxicity and bioavailability. Thus, we hope that in the case of natural products, the present review can not only provide a comprehensive understanding on RA covering its miscellaneous research fields, but also highlight some of the present issues and future perspectives worth investigating later, in order to help us utilize this polyphenolic acid more efficiently, widely, and safely.     

基于灰度曲线交点的结构光编码条纹边缘检测

在分析结构光编码白条纹扩散的原因和实际边缘形态的基础上,提出一种同时检测多边缘并消除扩散影响的亚像素精度方法--交点法.首先向被测表面投射互为反色的两组格雷编码图案,提取两组强度图像中灰度梯度较大的点作为边缘依据点,并对其进行曲线拟合,然后将对应拟合曲线的交点作为边缘.分析了交点法对结构光系统中常见的被测表面倾斜和离焦两个主要误差因素的适应能力.介绍了检测原理及误差因素分析,并进行了边缘检测实验.实验结果表明,对于宽度大于4 pixel的编码条纹,边缘检测相对误差小于1%,可消除被测表面倾斜和离焦的影响.     

太空育种射干的X射线荧光及X射线衍射分析和表征

联用X射线荧光光谱(XRF)和粉末X射线衍射(PXRD)方法,对我国独创的第4代太空诱变育种射干中多种元素种类和含量及晶态物质进行了研究。结果表明:太空组射干K元素含量比地面组、对照品分别提高了1.03和0.31倍,Mg元素分别提高了1.44和0.06倍,Ca,Mn和Fe元素含量比地面组分别提高了0.95,0.30和0.29倍,Al元素比地面组、对照组分别降低了38.5%和85.5%,并在射干中鉴别出一水草酸钙(CaC2O4.H2O)晶体,晶体含量是地面组<太空组<对照品。从而可得出结论:太空射干中人体必需的矿质元素比地面组都更接近或优于对照品。文章研究结果和方法对筛选品质优良的太空药材籽种和推广种植太空药材以及建立中药材质量评价标准,有积极的作用和重要意义。     

离散颗粒层被横向推移过程中的力学行为研究

研究发现,颗粒物质层被匀速推移挤压过程中,所需推移力先以线性规律增加,在某一确定点后,则会以指数规律增加.而颗粒物质是由众多离散颗粒组成的软凝聚态物质,其宏观上反映的是离散颗粒的个体性质和凝聚态物质的集体效应.颗粒与颗粒之间以及颗粒与边界之间的细观尺度接触力链的构成以及演变规律将会直接影响各种宏观受力情况,其摩擦力与挤压力便是力链的主要构成形式.围绕着定量描述细观力链特征,从而揭示力的变化规律这一目标,采用计算机模拟的方法,依照球形颗粒Hertz法向接触理论和Mindlin-Deresiewicz切向接触理论,对重力作用下不同数目的三维等径球体颗粒层的推移情况进行了离散元仿真模拟,量化分析了推移力变化规律、各摩擦力变化规律以及力链分布规律,发现摩擦力与挤压力在颗粒堆积的不同阶段对力链的构成起到了不同的主次作用,使得力链发生强弱演变,从而发现了推移颗粒物质层时推移力的变化规律及原因.这些结果有利于从力链角度揭示颗粒内部和颗粒与各边界之间的受力情况.     

Fabrication and characterization of rod-like nano-hydroxyapatite on MAO coating supported on Mg-Zn-Ca alloy

The poor corrosion resistance of magnesium alloys is a dominant problem that limits their clinical application. In order to solve this challenge, micro-arc oxidation (MAO) was used to fabricate a porous coating on magnesium alloys and then electrochemical deposition (ED) was done to fabricate rod-like nano-hydroxyapatite (RNHA) on MAO coating. The cross-section morphology of the composite coatings and its corresponding energy dispersion spectroscopy (EDS) surficial scanning map of calcium revealed that HA rods were successfully deposited into the pores. The three dimensional morphology and scanning electron microscopy (SEM) image of the composite coatings showed that the distribution of the HA rods was dense and uniform. Atomic force microscope (AFM) observation of the composite coatings showed that the diameters of HA rods varied from 95 nm to 116 nm and the root mean square roughness (RMS) of the composite coatings was about 42 nm, which were favorable for cellular survival. The bonding strength between the HA film and MAO coating increased to 12.3 MPa, almost two times higher than that of the direct electrochemical deposition coating (6.3 MPa). Compared with that of the substrate, the corrosion potential of Mg-Zn-Ca alloy with composite coatings increased by 161 mV and its corrosion current density decreased from 3.36 × 10⁻⁴ A/cm² to 2.40 × 10⁻⁷ A/cm² which was due to the enhancement of bonding strength and the deposition of RNHA in the MAO pores. Immersion tests were carried out at 36.5 ± 0.5 °C in simulated body fluid (SBF). It was found that RNHA can induce the rapid precipitation of calcium orthophosphates in comparison with conventional HA coatings. Thus magnesium alloy coated with the composite coatings is a promising candidate as biodegradable bone implants.     

Pressure dependence of the thermal stability in LiMn2O4

Structural stability in terms of the decomposition temperature in LiMn₂O₄ was systematically investigated by a series of high-temperature and high-pressure experiments.LiMn₂O₄ was found to have structural stability up to 5 GPa at room temperature.Under ambient pressure,the compound decomposed at 1300℃.The decomposition temperature decreased with increasing pressure,yielding more complex decomposed products.Below the decomposition temperature,the crystal structure of LiMn₂O₄ varied with pressure.The presented results in this study offer new insights into the thermal and pressure stability of LiMn₂O₄ materials as a cathode for lithium-ion batteries that can operate under extreme conditions.Therefore,these findings may serve as a useful guide for future work for improving lithium-ion batteries.     

Notable shift of ultraviolet intensity on Sn-doped ZnO nanostructure fabricated by sol–gel method

Sn-doped ZnO (SZO) thin films are deposited by sol–gel dip-coating method with Sn content at 0 at.% and 1–15 at.% with an increment of 2 at.%. The structure and luminescence of the films are investigated. X-ray diffraction results indicate that all the SZO samples show preferential orientation along the (002) direction, and the scanning electron microscope exhibits that the surface morphology of the films change from nanoparticles to nanorods with increasing Sn concentration. X-ray photoelectron spectroscopy reveals that Sn exists as valence of +4 in the matrix. The photoluminescence peaks at 381 and 398 nm are observed in all the samples. The ratio of intensity of peak at 381 nm to that of peak at 398 nm differed markedly. The intensity of peak at 398 nm might be due to the response for the Sn atoms, while the intensity of peak at 381 nm is probably related to the quantum size effect.