Spectroscopic investigation of the chromium-doped LiNbGeO5 laser crystal

Polarized absorption and emission spectra, and temperature dependences of the fluorescence lifetimes and intensities for the chromium-doped LiNbGeO₅ laser crystal are presented. Crystal symmetry and comparison with the infrared fluorescence properties of the Cr-doped Mg₂SiO₄ and Y₃Al₅O₁₂ laser crystals seem to identify the active center as a Cr⁴⁺ ion in a tetrahedral site.     

Morphology of Nylon-6 blends with styrenic polymers

The morphology of blends of styrenic polymers in a matrix of 75% Nylon-6 prepared in a Brabender Plasti-Corder was examined by scanning electron microscopy. Styrene/acrylonitrile copolymers (SAN) form smaller particles as the AN level increases owing to the corresponding decrease in the SAN–polyamide interfacial tension. Various styrenic polymers containing functional groups, maleic anhydride or oxazoline type, that can react with Nylon-6 during melt processing were added to the SAN phase which also led to a decrease in the particle size owing to the graft copolymer formed in situ. The effects of functional group type, amount of functional groups per chain, amount of functional polymer added, and the miscibility of the styrene/maleic anhydride (SMA) and SAN copolymers on the morphology of the styrenic phase in the Nylon-6 matrix are described. © 1992 John Wiley & Sons, Inc.     

Influence of intrachain hydrogen bonding on the cyclization of a polystyrene chain

Cyclization of a polystyrene chain (M_n = 10,600; M_w/M_n = 1.09) both ends labeled with 4-(1-pyrenyl)butanoamide groups was studied in cyclohexane between 25 and 95°C. The amide groups (peptide bonds) at both ends can form an intrachain hydrogen bond between the amide hydrogen at one chain end and the carbonyl oxygen at the other. The presence of two sets of conformers, random coils, and chains cyclized through hydrogen bonding, complicates the data analysis. The pyrene excimer kinetics of this polymer is well described by a model composed of two monomers (hydrogen bonded and nonbonded chains) and one excimer, in equilibrium. The cyclization rate constant for hydrogen-bonded chains is larger than the one for nonhydrogen-bonded chains. The pyrene excimer binding energy (ca. 1.6 kcal/mol) is lower than the published value for nonhydrogen-bonded chains (～ 9 kcal/mol), suggesting that intrachain hydrogen bonding hinders the stabilization of the excimer. © 1994 John Wiley & Sons, Inc.     

The influence of synthetic conditions on the stability of methotrexate-monoclonal antibody conjugates determined by reversed phase high performance liquid chromatography.

Methotrexate (MTX) has been convalently attached to an IgG-type monoclonal antibody (791T/36) directed to tumour-associated antigen gp72. Conjugates were synthesized by the active ester method using MTX N-succinimidyl ester at various pH values (7.5-10.5). Following purification by gel filtration, high performance liquid chromatography was used to assess the free drug or its derivatives in samples of MTX-791T/36 conjugates previously treated (or not) with hydroxylamine. Quantitative analysis, performed on a reversed phase column (pore size 300 A) with isocratic acetonitrile-sodium acetate buffer (pH 4.8) as mobile phase, indicated no detectable amount of free methotrexate in hydroxylamine-treated conjugates even six months after their preparation. Similar observations were made with conjugates, whose synthesis were performed at pH greater than or equal to 10. In contrast, the presence of increasing amounts of drug/metabolite could be demonstrated in samples produced at lower pH values. Based on these findings, the pH-dependent kinetics of MTX release has been determined and used to design conditions under which stable MTX-791T/36 conjugates could be prepared without hydroxylamine reaction.     

On the resolving power of high-contrast saturated absorption spectroscopy

Recently Svanberg et al. [Optics Lett. 11 (1986) 138; J. Opt. Soc. Am. B 4 (1987) 462] obtained saturated absorption resonances with subnatural linewidth by working in the regime of high pumping intensities and optically thick atomic samples. We analyze here this new spectroscopic regime, within the formalism of Maxwell-Bloch-type equations, in the case of a Doppler broadened medium having two nearly degenerate but uncoupled resonances. We show that even in this most favourable case it is not possible to resolve spectral features that lie within the natural linewidth.     

Dynamic response of doubly curved honeycomb sandwich panels to random acoustic excitation. Part 2: Theoretical study

In this paper a single-degree-of-freedom model is developed to predict the dynamic response of an acoustially excited doubly curved sandwich panel. Three variants of the model are investigated, based on differing assumptions regarding the spatial distribution of the applied loading. When the loading is assumed to be uniform then the model reduces to the Miles approach, and when the loading is assumed to conform to the structural mode shape then the method is very similar to the Blevins approach. The third variant involves a more detailed consideration of the travelling wave characteristics of the applied loading, and this is found to give much improved agreement with experimental results obtained in a progressive wave tube facility. In addition, an approach using the finite element method is presented in which the response to grazing incidence excitation is computed, and this is also found to yield good agreement with the experimental results.     

Crystallographic report: Bis[bis(N,N‐dibenzyldithiocarbamato)cadmium(II)]

The centrosymmetric structure of {Cd[S₂CN(CH₂Ph)₂]₂}₂ features both bridging and chelating dithiocarbamate ligands so that a square pyramidal S₅ coordination geometry results. Copyright © 2004 John Wiley & Sons, Ltd.     

Ion-interaction chromatography of several metallocyanide complexes stabilized by adding cyanide in a neutral mobile phase.

Standard solutions (at 10(-5) M levels) of Cu(I)- and Fe(II)-cyanide complexes were stabilized for at least 5 h using 0.5 mM cyanide solution (around pH 9) as a medium. Complexes of Cu(I)- and Fe(III)-cyanide also could be stabilized without any dissociation by adding 1 mM cyanide to an acetonitrile-water (18:82, v/v) mobile phase (pH 7.0) containing 10 mM tetra-n-propylammonium salt (TPA). Under the optimal conditions, the six complexes of Cu(I)-, Ag(I)-, Ni(II)-, Fe(II)-, Fe(III)- and Au(I)-cyanides were resolved from their mixtures within about 45 min, with well-shaped chromatographic peaks.